We are looking for a talented tire or performance engineer to join our team. As a tire or performance engineer, you will be responsible for the following:

Tire Testing, Modeling, and Reporting

In-lab test and modeling of all the tire manufacturer motorsport tires. Your responsibilities will include:

• Interface between test facility and tire manufacturer
• Development of tire testing procedures
• Tire test attendance (in person or virtually)
• Test data processing, modeling, and reporting

On-Track Testing and Race Events

Your responsibilities at the track will include:

• Pre-event analyses and simulation
• Support teams

Support the teams with any tire-related issues they have. This could be related to performance, consistency, tire wear, failure, etc.

• We could be suggesting different cambers, pressures, car setup, warm-up procedure, oven temperature, driver inputs, and strategy to improve performance or limit tire degradation.

• If we are assigned to work more closely with a specific team, we can strengthen our relationship and might be doing other tasks that relate to performance engineering in general

• Good communication is an important skill to perform this part of the work

• Gathering of feedback from the teams to understand what the drivers and teams have to say about the tires or development tires, and report back to the tire manufacturer

• Post-event data review and reporting

• Correlation between findings in the in-lab testing and on-track events

This position requires domestic and international travel.

Education & Experience

• Bachelor’s degree or higher in mechanical engineering or similar discipline
• Minimum of three years of experience in a similar position in series such as IMSA, WEC, ELMS, Formula 2, etc.

General Skills

• Proactive and capable of working with little guidance
• Good problem-solving skills
• Good team player and communicator
• Capable of working in a fast-paced environment and under pressure
• Willing to travel and work flexible hours, including weekends, as required
• Excellent oral and written English communication

Required Skills

• Good understanding of vehicle dynamics theory and application, simulation, and simulation validation
• Strong understanding of tires, suspension, and aerodynamics,as well as their interaction
• Tire models understanding and experience
• Experience with vehicle dynamics simulation software
• Proficiency in data analysis software programs (e.g., Motec i2, WinDarab, PI, Race Studio Analysis, etc.)
• Ability to develop internal tools/software for data processing and analysis
• Capable of using data processing and analysis as a decision-making tool
• Data-driven mindset
• Extremely organized and systematic approach to work

Preferred Skills

• Tire testing experience (test procedure development or test data processing)
• Tire modeling experience
• Tire physics understanding
• Laboratory test experience (e.g., K&C, Post-Rig, Wind Tunnel)
• Programming knowledge (Matlab, Python, VBA, etc.)
• Proficiency in one of the following languages would be an additional asset: Chinese, French, German, Japanese, Portuguese, or Spanish

Salary will be commensurate with experience and is negotiable

Can operate as an employee in the US or a contractor in the US or Europe

XML job scraping automation by YubHub

Your responsibilities will include analyzing system requirements, defining and documenting software functional requirements, designing software functional architecture, developing control functions and algorithms, and performing static validation of models. You will also validate the functional behavior of models through Model-in-the-Loop (MiL) simulations, automatically generate embedded code from validated models, and conduct Software-in-the-Loop (SiL) simulations to verify the functional compliance of the generated code.

In addition to your technical expertise, you will participate in the software integration of developed components into the target platform and collaborate with internal teams and external partners to ensure consistency and continuity throughout the V-cycle development process.

We offer a smooth onboarding process, opportunities for growth and advancement within the company, flexible working arrangements, a collaborative environment, community connection, recognition and support, and a commitment to shaping the future of mobility.

XML job scraping automation by YubHub

The Test and Evaluation team at Anduril works across the entire spectrum of products and business lines, as well as all flight operations and test range management. Our team conducts full system level development testing, new production acceptance testing, sub-component qualification testing and much more. In short, if it involves test, we support it.

If you are interested in working in an extremely innovative and fast-paced environment, where your work directly makes an impact and difference in the products that are fielded, this is a fantastic opportunity.

Responsibilities

• Plan and execute system level T&E of hardware and software with emphasis placed on resource planning, conducting ground and flight test, initial issue investigation, and process improvement/development.

• Act as lead or supporting test engineer for missile or weapon systems to include development, certification and integration test of subsystems to the AUR configuration.

• Collect test data and perform initial data analysis for the system under test.

• Work closely with program management and other engineering departments to develop requirements, and discuss test results to include collected data and observations.

• Assist in the creation of developmental test plans, test cards, technical updates and test reports.

• Conduct ground and flight testing at private and government-owned test ranges.

• Work in a safe manner in accordance with established operating procedures and standard practices.

Requirements

• A bachelor's degree in engineering or a related technical discipline from an accredited institution. May substitute equivalent engineering experience in lieu of education.

• 5+ years of experience as test conductor/director for developmental aircraft, weapons, or missile systems.

• Must have a good understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and expanding knowledge of principles, concepts, theory, and practices in related technical specialties.

• Test engineering experience working with developmental weapon or missile systems on manned and/or unmanned aircraft to include requirements development, planning, execution, and reporting.

• Previous experience with and/or current working knowledge of MIL-STD-8591, MIL-STD-2088, MIL-STD-1553, MIL-STD-1760, AS8775, AS5653, etc.

• Experience integrating and conducting test with suspension, arming, and release equipment.

• Previous expertise and working knowledge of the National Airspace System and UAS operating rules and regulations thereof.

• Must possess the ability to understand new concepts quickly; apply them accurately; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.

• Strong computer and documentation experience.

• Must have strong communication (written and verbal) and interpersonal skills.

• Ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas.

• Able to work extended hours as required.

• Ability to travel as required for test planning and execution.

• Bias for action – if you see a problem, you want to solve and fix it.

• Ability to obtain and maintain a U.S. Top Secret-Level security clearance.

Preferred Requirements

• Experience working with the Department of Defense (DoD).

• Prior experience with software code/script building using programming languages such as Go, Java, C++, Python, JavaScript, etc.

• Prior experience with Linux based systems and command line.

• Working Knowledge with COTs Small UAS autopilot and mission planning software.

• Experience working with manned aircraft personnel and familiar with aviation terminology.

• Experience with weapon or tactical datalinks.

• Experience with multiple different propulsion systems to include air and non-air breathing.

XML job scraping automation by YubHub

What you'll do

• Vehicle Dynamics Development from Benchmarks, target setting to target cascading
• Conventional suspension tuning on spring, damper, anti-roll bar, bushings, bump stop, top mount, rebound spring, etc.
• Adaptive/active suspension tuning on air spring, adaptive/active dampers, etc.

What you need

• Bachelor’s or master’s degree of automotive engineering
• Excellent driving skills (at/over vehicle limit on different surfaces)
• Excellent subjective evaluation skills
• Solid knowledge about overall vehicle dynamics, kinematics and elastokinematics, hardware characteristics on different tuning parts

XML job scraping automation by YubHub

What you'll do

As a Performance Engineer, you will work alongside our support team and the engineering groups in Cologne to deliver comprehensive performance analysis of drivers, teams, and cars using car data, timing data, and simulation tools across various categories, championships, events, and circuits.

• Work alongside our support team and the engineering groups in Cologne to deliver comprehensive performance analysis of drivers, teams, and cars using car data, timing data, and simulation tools across various categories, championships, events, and circuits
• Liaise with our customer teams to understand the limiting factors for performance against competition.

What you need

• A Bachelor’s or Master’s degree in Mechanical Engineering, Automotive Engineering, or a related discipline
• Several years of experience in a similar role or as a race team performance engineer in GT3
• Strong communication skills with the ability to confidently and knowledgeably engage as a customer-facing representative of the company

XML job scraping automation by YubHub

What you'll do

• Design and develop new rally car components, including chassis, suspension, and aerodynamics
• Collaborate with our team of engineers to test and refine our cars on the track
• Analyse data and identify areas for improvement

What you need

• Bachelor's degree in Mechanical Engineering or a related field
• Proven experience in motorsport engineering or a related field
• Strong understanding of mechanical systems and materials science

XML job scraping automation by YubHub

What you'll do

• Design and develop new rally car components, including chassis, suspension and aerodynamics
• Test and validate new components to ensure they meet our performance and safety standards
• Collaborate with our team of engineers and technicians to ensure the smooth operation of our rally cars

What you need

• A degree in Mechanical Engineering or a related field
• Proven experience in motorsport engineering, preferably in rally racing
• Strong knowledge of CAD design and simulation tools, such as SolidWorks and ANSYS

XML job scraping automation by YubHub

What you'll do

• Design and develop new components and systems for our rally cars
• Test and validate new components and systems on the track and in the laboratory
• Collaborate with our team of engineers and technicians to ensure the successful development and implementation of new technologies

What you need

• A degree in Mechanical Engineering or a related field
• Proven experience in motorsport engineering or a related field
• Strong knowledge of CAD design and simulation tools
• Excellent communication and teamwork skills

XML job scraping automation by YubHub