You will also perform tests according to test case lists and checklists, ensuring testbed safety according to a Safety Matrix by a complete and repeatable test procedure. Additionally, you will support continuous improvement of standards by providing constant feedback and provide documentation created in parallel to the commissioning process.

To be successful in this role, you will require a university degree in a technical field such as automation, electronics, or computers, and at least one year of experience in PLC programming. Knowledge of SIEMENS PLCs and HMIs is considered a plus, as well as skilled programming languages defined in IEC61131 and experience in safety PLC programming.

You will be willing to travel approximately 50-60% of the time and have good English knowledge. Results-oriented individuals who are skilled in all programming languages defined in IEC61131 and have experience in safety PLC programming are encouraged to apply.

XML job scraping automation by YubHub

xAI is building Colossus, the world's largest AI supercomputer, in Memphis. As a Power Generation Engineer, you will play a pivotal role in powering this infrastructure.

You will oversee the daily operations of natural gas turbines and associated power generation equipment, ensuring optimal performance and compliance with safety and environmental standards.

Monitor and analyse power generation systems to detect and resolve issues proactively, minimising downtime and maximising efficiency for the datacentre's massive computational demands.

Collaborate with cross-functional teams to integrate power systems seamlessly with AI infrastructure needs.

Conduct regular maintenance, troubleshooting, and upgrades on turbines, generators, and control systems to support scalable power requirements.

Develop and implement strategies for energy efficiency, cost reduction, and sustainable power generation practices.

Lead root cause analysis for any power-related incidents and drive continuous improvement initiatives.

Ensure all operations adhere to regulatory requirements, including those from local, state, and federal agencies governing natural gas plants.

Mentor junior engineers and technicians, fostering a culture of excellence and innovation in power management.

Basic Qualifications

Bachelor's degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, or a related field.

5+ years of experience in power generation, with a focus on natural gas plants, turbines, or similar high-reliability energy systems.

Strong understanding of turbine operations, control systems, and power distribution in industrial settings.

Proven track record in troubleshooting complex mechanical and electrical issues in power generation environments.

Familiarity with safety protocols, environmental regulations, and industry standards (e.g., ASME, IEEE).

Preferred Skills and Experience

Master's degree in a relevant engineering discipline.

8+ years of experience, including leadership roles in power plant operations or datacentre energy management.

Expertise in natural gas turbine technologies (e.g., GE, Siemens) and combined cycle power plants.

Knowledge of renewable energy integration or hybrid power systems.

Certifications such as PE (Professional Engineer) or CEM (Certified Energy Manager).

Prior work in high-tech or mission-critical facilities, such as datacentres or aerospace.

XML job scraping automation by YubHub

This is an impactful role where you will take ownership of defining critical maintenance plans, shaping technical data packages, optimizing sparing, and ensuring seamless lifecycle management. Your expertise will be vital in translating engineering innovation into reliable, supportable systems for our warfighters, directly enabling Anduril’s mission to transform defense technology.

Responsibilities:

• Develop and maintain comprehensive, ground-up sustainment plans for the specific product(s) you support
• Partner with customers, operations teams, and cross-functional engineering teams to define, implement, and continuously improve effective maintenance and repair strategies
• Ensure the availability of up-to-date maintenance procedures, specialized tools, and accurate technical manuals to support field sustainment operations
• Serve as the primary point of contact for all sustainment-related matters within your assigned product team, proactively identifying and resolving issues
• Collaborate with design and manufacturing engineering teams during new product development phases to integrate best sustainment practices and design-for-supportability concepts early in the process
• Create and maintain a Service Bill of Materials (SBOM) and other critical sustainment artifacts (e.g., provisioning lists, support equipment lists), ensuring they establish a central, up-to-date repository for all sustainment data

Required Qualifications:

• Demonstrated detailed and extensive technical expertise in applying mechanical or systems engineering principles to complex hardware systems
• Hands-on proficiency with professional CAD software and Product Lifecycle Management (PLM) tools for managing engineering data, changes, and configurations
• Foundational understanding and practical application of Integrated Product Support (IPS) elements, principles, and concepts (e.g., maintenance planning, supply support, technical data management, support equipment, training, facilities)
• 5+ years of experience in product support, sustainment engineering, or systems engineering roles within a high-rigor environment (e.g., defense, aerospace, advanced robotics, complex industrial systems)
• Familiarity with military standards, specifications, and regulatory compliance relevant to product support and sustainment activities
• Proven ability to work effectively in dynamic, unstructured environments, adapt to rapidly changing priorities, and quickly learn and master new technologies and complex systems
• Excellent written and verbal communication skills, with a demonstrated ability to synthesize complex technical and quantitative data into clear, concise decision statements and actionable recommendations for diverse audiences (engineers, operators, customers)

Preferred Qualifications:

• Bachelor's degree in Engineering (Mechanical, Manufacturing, Aerospace, or related field)
• Direct experience with sustainment methodologies such as Maintenance Task Analysis (MTA), Level of Repair Analysis (LORA), Reliability Centered Maintenance (RCM), or developing Contractor Logistics Support (CLS) plans
• Proven track record of developing and delivering key customer-facing sustainment artifacts and contractual deliverables
• Prior hands-on experience with specific enterprise tools such as Siemens NX, Teamcenter (PLM), JIRA, or Oracle (ERP) or equivalent systems
• Direct experience with complex military systems, robotics, unmanned systems, or advanced defense technology products
• Understanding of the use of the Technical Data Package (drawings, parts lists, interface control documents, and electrical schematics)
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Willingness and ability to travel for on-site support, field deployments, and direct customer engagements as required

Additional Benefits:

• Highly competitive equity grants are included in the majority of full-time offers
• Top-tier benefits for full-time employees, including healthcare benefits, income protection, generous time off, caregiver & wellness leave, family planning & parenting support, mental health resources, professional development, commuter benefits, relocation assistance, retirement savings plan, and more

Salary Range: $129,000-$193,000 USD

XML job scraping automation by YubHub

This high-visibility, mission-critical role will oversee the full lifecycle of a large-scale natural gas-fired combined cycle facility, incorporating Doosan Enerbility's advanced gas turbines, steam turbines, HRSGs, balance-of-plant systems, and supporting infrastructure. You will drive aggressive timelines, ensure world-class safety and quality, manage complex stakeholder interfaces, and deliver the power foundation required to scale AI training at unprecedented levels.

Responsibilities:

• Lead end-to-end construction of the Doosan combined cycle power plant, from site preparation and civil works through mechanical/electrical installation, commissioning, and handover.
• Serve as xAI's primary on-site leader, managing interfaces with Doosan Enerbility, EPC contractors, subcontractors, utilities, and regulatory authorities.
• Develop and maintain detailed construction schedules, resource plans, and progress tracking (using Primavera P6 or similar tools) to meet xAI's aggressive delivery targets.
• Oversee procurement, logistics, erection, and integration of major equipment including gas turbines, steam turbines, generators, HRSGs, cooling towers, fuel systems, and electrical substations.
• Enforce rigorous safety, environmental, and quality standards, ensuring full compliance with permits, emissions controls, OSHA, EPA, and local regulations.
• Manage project budget, cost forecasting, change orders, and risk mitigation; proactively resolve issues to avoid delays or cost overruns.
• Coordinate commissioning, startup, performance testing, and seamless transition to operations teams.
• Lead and motivate large field teams (200+ personnel), subcontractors, and vendors in a high-velocity environment.
• Provide regular progress updates, risk assessments, and key metrics to xAI senior leadership.

Basic Qualifications:

• 15+ years of progressive construction management experience on large-scale industrial projects, with 8+ years specifically leading combined cycle power plant construction (500 MW+ scale preferred).
• Proven track record delivering gas-fired combined cycle facilities on time and budget, including turbine erection, HRSG installation, and balance-of-plant integration.
• Deep expertise in power plant construction sequencing, major equipment installation, piping, electrical systems, and grid interconnection.
• Strong knowledge of U.S. permitting processes, environmental compliance (air quality, emissions, noise), and utility coordination.
• Demonstrated leadership managing large teams, multiple subcontractors, and international OEM vendors under pressure.
• Proficiency with project management tools (Primavera P6, MS Project), cost control, and risk management.
• Ability to thrive in fast-moving, high-ambiguity environments with a no-excuses mindset.

Preferred Skills and Experience:

• Direct experience with Doosan Enerbility (or similar OEMs like GE, Siemens, Mitsubishi) combined cycle projects.
• Background in power infrastructure supporting data centers, hyperscalers, or mission-critical facilities.
• Familiarity with fast-track construction approaches in the tech/energy sector.
• Bachelor’s degree in Construction Management, Mechanical/Electrical Engineering, or related field; PE license or advanced degree a plus.
• Knowledge of advanced emissions controls and sustainability practices in power generation.

Additional Requirements:

• Willingness to work extended hours and be fully onsite during peak construction phases.
• Ability to stand/walk for long periods, work in industrial environments, and travel as needed.

XML job scraping automation by YubHub

As an Integration and Test Engineer (Mechanical), you will work within a dynamic team of multidisciplinary engineers and specialists throughout the life of AUV design, integration, and test efforts. Your responsibilities will include:

• Supporting design and integration of AUV mechanical subsystems and components, ensuring proper interfaces with electronic and software systems
• Developing, building and operating physical integration environments and test fixtures to support system maturity efforts
• Conducting root cause analysis for mechanical failures and implementing corrective actions
• Providing mechanical subject matter expertise to test operations for AUV platforms, including conducting pre-mission testing, vehicle tasking, and data analysis
• Writing, reviewing, and executing detailed test procedures to document the step-by-step execution of internal and customer-facing efforts to test and evaluate AUV subsystems, platforms, and new capabilities
• Supporting infield debug, repair, operation, and maintenance of AUVs
• May be in the field up to 20% of the time, supporting nearshore and offshore testing

We are looking for a highly motivated and experienced engineer who is passionate about delivering high-quality results and has a strong understanding of mechanical engineering principles and practices. If you have a genuine interest in working with multi-domain unmanned systems and have a proven track record of success in a similar role, we encourage you to apply.

XML job scraping automation by YubHub

Key responsibilities include:

• Lead the development and implementation of new manufacturing processes and equipment
• Design and optimize production processes for efficiency, scalability, and quality
• Create and review technical drawings, blueprints, and process maps
• Identify and implement continuous improvement initiatives to reduce waste, improve quality, and increase productivity
• Utilize Lean manufacturing, Six Sigma, or other methodologies to enhance manufacturing operations
• Oversee the execution of manufacturing projects, ensuring they are completed on time, within budget, and to the required quality standards
• Coordinate with cross-functional teams, including Design, Quality, and Supply Chain, to ensure smooth production ramp-up for new products
• Collaborate with suppliers to improve material quality and negotiate cost-effective solutions
• Mentor and support junior engineers and manufacturing staff
• Stay abreast of technological advancements and industry trends to drive innovation within the manufacturing processes

We are looking for a highly motivated and experienced Manufacturing Engineer who is passionate about manufacturing and has a strong passion for continuous improvement.

XML job scraping automation by YubHub

Your key responsibilities will include investigating, planning, designing and developing harnesses to meet various technical requirements, researching and selecting appropriate connectors, back-shells, contacts, wire, shielding, and cable construction for the product to meet appropriate environmental requirements, developing and generating harness system block diagrams and wire diagrams to release for production, participating in design reviews and providing input to identify issues and drive design choices, preparing harness assembly instructions and test procedures, incorporating your knowledge of industry standards and best practices, and providing guidance to the electrical team in identifying electrical system requirements given input from internal and external stakeholders including engineering (mechanical, electrical, software), product management, quality and compliance.

You will work in a fast-paced environment supporting new developments, active deployments, and customer-operated hardware, and concurrently manage involvement in multiple projects at various stages.

To be successful in this role, you will need to have a Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or equivalent, and 3+ years hands-on experience designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications, experience working directly with harness manufacturers to deliver high-quality, high-reliability products, and ownership of end-to-end of the electrical wiring and interconnect system, including power distribution, grounding, shielding, and signal integrity.

You will also need to ensure the design meets system-level electrical requirements for voltage, current, bandwidth, redundancy, EMI/EMC, perform electrical trade studies for wire gauge, shielding, connector selection, and topology, analyze and mitigate electrical risks such as voltage drop, crosstalk, EMI susceptibility, and thermal effects, familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, 1553), familiarity with existing applicable harness standards as well as MIL-STD requirements, ability to apply knowledge of SWaP for power, network, and communications systems and designs, experience reading wire block interconnect diagrams and wire diagrams, and exceptional organization and communication skills (both written and oral).

Preferred qualifications include building 3D routed harness data files applying NX Cabling and Siemens Capital Harness, experience with or proficiency in 3D CAD wire harness routing, such as (NX, Siemens Capital, CATIA, CREO), ability to read and generate formboard drawings in 2D CAD for production, EMI/EMC principles, and common electrical bus interfaces (CAN, Ethernet, RS-422, RS-232, MIL-STD-1553).

The salary range for this role is $98,000-$171,000 USD, and highly competitive equity grants are included in the majority of full-time offers.

XML job scraping automation by YubHub

Your key responsibilities will include:

Executing structural, dynamic, and environmental testing on drones, missiles and spaceflight hardware Leading test campaigns including test plan creation, system activation, test operations, data review, and equipment design/fabrication Generating work instructions to direct and instruct technicians in the fabrication and integration of test articles and equipment Operating and troubleshooting data acquisition and control systems, wiring, and instrumentation, as well as thermal chambers, electrodynamics shakers, and fluid power systems Automating repetitive test operations to improve efficiency and safety

To be successful in this role, you will need to have a strong background in engineering, with experience in hardware automation and software-hardware communication/integration. You will also need to be highly competent with, and fluid use of, engineering first principles. A Bachelor's degree in an engineering discipline is required, with a Master's or Ph.D. being preferred.

In addition to your technical skills, you will need to be able to communicate effectively with design engineers, technicians, and other stakeholders to ensure that test campaigns are completed on time and within budget. You will also need to be able to work in a fast-paced environment and adapt to changing priorities and deadlines.

If you are a motivated and experienced engineer who is looking for a challenging and rewarding role, we encourage you to apply for this position.

XML job scraping automation by YubHub

Key responsibilities include: Reading and interpreting technical blueprints. Set-up/operation of CNC multi-axis milling and multi-axis turning machines. Setup various work holding and fixture methods according to a setup sheet. Run and prove out new programs. Troubleshoot issues and make minor adjustments during the manufacturing process. Perform quality control both during and at completion of the manufacturing process. Help clean and maintain CNC equipment.

Required qualifications include: 4+ years experience as a machine setup/operator. Clear understanding of G and M code. Intermediate level of familiarity with multi-axis and 3D machining. Experience with 3+1 / 3+2 axis milling, live tooling lathes, mill-turns and/or multi task machines. Experience with Fanuc, Siemens or Brother controls. Intermediate level of familiarity with various alloys, metals, plastics, etc. Intermediate level of tooling and fixture experience. Intermediate level of GD&T knowledge. Ability to take ownership of set-up and operation process from start to finish. Ability to adapt between R&D and short production. Ability to multi-task. U.S. Person status is required as this position needs to access export controlled data.

Preferred qualifications include: 5-axis simultaneous set-up and operation experience. Experienced with navigating a CAD model to measure dimensions. Water Jet experience. 3D printing experience (FDM/SLA). CMM experience (PC-DIMIS).

The salary range for this role is $43-$54.80 USD per hour.

XML job scraping automation by YubHub

We are seeking a Manufacturing Engineer with a Mechanical/Mechatronic Engineering background to join our team in Sydney, Australia.

As a Manufacturing Engineer, you will leverage deep technical expertise to solve complex manufacturing challenges, drive technology insertion, and ensure the manufacturability of next-generation products from the earliest stages of design.

Key Responsibilities:

• Provide expert Design for Manufacturability (DFM) and Design for Assembly (DFA) feedback, influencing designs to ensure they are compatible with capable and cost-effective manufacturing processes.

• Analyze engineering drawings, material selections, and tolerance stacks to identify and mitigate manufacturing risks early in the product lifecycle.

• Investigate and resolve production line-down situations, assembly problems, process deviations, and tooling issues to minimize downtime and maintain schedule.

• Provide clear and concise interpretation of engineering drawings, specifications, and work instructions to the production team.

• Develop, maintain, and continuously improve detailed manufacturing work instructions, assembly guides, and Standard Operating Procedures (SOPs) to ensure clarity, repeatability, and quality.

• Manage these requirements within Anduril’s MES.

• Serve as the technical lead for investigating complex or systemic production issues, conducting deep-dive Root Cause Analysis (RCA) to identify fundamental process flaws.

• Develop novel tooling solutions for fabrication and assembly of structural parts.

• Assess the process impact of Engineering Change Notices (ECNs) and define the necessary requalification and validation activities.

• Provide support to Supply Chain in the technical qualification and development of critical suppliers, assessing their process capabilities to meet demanding engineering requirements.

• Collaborate on the design and optimization of workstation and production line layouts to enhance ergonomics, safety, and efficiency.

• Foster a collaborative environment that encourages knowledge sharing and team engagement.

Requirements:

• 5+ years of hands-on experience in a manufacturing environment (e.g., aerospace, defense, medical device, complex electronics).

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field.

• Proven ability to troubleshoot technical manufacturing issues and lead root cause analysis.

• Experience with Lean Manufacturing and continuous improvement methodologies.

• Demonstrated experience reading and interpreting complex engineering drawings, schematics, and specifications, including a strong understanding of GD&T (Geometric Dimensioning and Tolerancing).

• Excellent communication and interpersonal skills, with the ability to work effectively with operators, technicians, and senior management.

• Prior knowledge and interaction with a Manufacturing Execution System (MES) for production operations

• Prior knowledge of Oracle (ERP), Teamcenter (PLM) or similar systems.

• Ability to obtain and maintain an Australian Government Security Clearance (NV2).

Preferred Qualifications:

• Production line design and set up including Value Stream Mapping, material flow, workstation and tooling design.

• Experience with work instruction authoring and MBOM configuration.

• Experience with CAD software (NX, Solidworks, Siemens/Teamcenter)

Salary Range: An estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

Required Skills:

• Design for Manufacturability (DFM)

• Design for Assembly (DFA)

• Root Cause Analysis (RCA)

• Lean Manufacturing

• Continuous Improvement

• Geometric Dimensioning and Tolerancing (GD&T)

• Manufacturing Execution System (MES)

• Oracle (ERP), Teamcenter (PLM) or similar systems

Preferred Skills:

• Production line design and set up

• Work instruction authoring and MBOM configuration

• CAD software (NX, Solidworks, Siemens/Teamcenter)

XML job scraping automation by YubHub

You will develop and maintain critical sustainment artifacts, ensuring they remain up-to-date and aligned with product evolution. Collaborating closely with engineering, quality, reliability, and operations teams, you will create and execute comprehensive plans that support the long-term reliability and operational readiness of our systems.

This role is pivotal in ensuring that Anduril's AUVs, UUVs, & USVs meet the highest standards of performance and maintainability throughout their lifecycle. From crafting detailed maintenance strategies to managing technical documentation and spare parts planning, your expertise will play a vital role in enabling Anduril's mission to transform Autonomous Underwater Vehicle operations.

Responsibilities:

• Develop and maintain comprehensive, ground-up sustainment plans for AUVs, UUVs, & USVs
• Partner with customers, operations teams, and engineering teams to define and implement effective maintenance and repair strategies
• Ensure the availability of up-to-date maintenance procedures, tools, and technical manuals to support sustainment operations
• Serve as the primary point of contact (POC) for all sustainment-related matters within the product team
• Collaborate with engineering teams during new product development to integrate best sustainment practices early in the design process
• Create and maintain a service bill of materials (SBOM) to establish a central, up-to-date repository for sustainment artifacts

Required Qualifications:

• Demonstrates a detailed and extensive technical expertise and application of engineering principles
• Proficiency in CAD software and product lifecycle management tools
• Familiarity with military standards and specifications
• 5+ years of demonstrated experience working in a high rigor environment (maritime, aerospace, automotive, nuclear, etc.)
• Ability to work effectively in unstructured environments and adapt to changing priorities
• Strong self-motivation and ability to work independently
• Exceptional problem-solving skills and analytical thinking
• Possess high attention to detail and strong organizational skills
• Excellent written and verbal communication skills – you must have an ability to synthesize complex quantitative data into clear decision statements
• Demonstrated ability to learn and master new technologies quickly

Preferred Qualifications:

• Bachelor's degree in Engineering (Maritime, Mechanical, Manufacturing, Aerospace, or related field)
• 5+ years of experience in product support, sustainment, or systems engineering
• Prior experience working with JIRA, Siemens NX, Teamcenter (PLM), or Oracle (ERP) or equivalents
• Experience reviewing technical drawings/schematics
• Understanding of the use of the Technical Data Package (drawings, parts lists, interface control documents, and electrical schematics)
• Broad knowledge of Integrated Product Support (IPS), including sustainment and supportability principles and concepts
• Experience with complex military systems or defense technology products
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Willingness to travel for on-site support and customer engagements

Salary Range: The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package.

Benefits: Anduril offers top-tier benefits for full-time employees, including:

• Healthcare Benefits
• Income Protection
• Generous time off
• Family Planning & Parenting Support
• Mental Health Resources
• Professional Development
• Commuter Benefits
• Relocation Assistance
• Retirement Savings Plan

Protecting Yourself from Recruitment Scams: Anduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.

Data Privacy:

XML job scraping automation by YubHub

This is an impactful role where you will take ownership of defining critical maintenance plans, shaping technical data packages, optimizing sparing, and ensuring seamless lifecycle management. Your expertise will be vital in translating engineering innovation into reliable, supportable systems for our warfighters, directly enabling Anduril’s mission to transform defense technology.

Responsibilities

• Develop and maintain comprehensive, ground-up sustainment plans for the specific product(s) you support
• Partner with customers, operations teams, and cross-functional engineering teams to define, implement, and continuously improve effective maintenance and repair strategies
• Ensure the availability of up-to-date maintenance procedures, specialized tools, and accurate technical manuals to support field sustainment operations
• Serve as the primary point of contact for all sustainment-related matters within your assigned product team, proactively identifying and resolving issues
• Collaborate with design and manufacturing engineering teams during new product development phases to integrate best sustainment practices and design-for-supportability concepts early in the process
• Create and maintain a Service Bill of Materials (SBOM) and other critical sustainment artifacts (e.g., provisioning lists, support equipment lists), ensuring they establish a central, up-to-date repository for all sustainment data

Requirements

• Demonstrated detailed and extensive technical expertise in applying mechanical or systems engineering principles to complex hardware systems
• Hands-on proficiency with professional CAD software and Product Lifecycle Management (PLM) tools for managing engineering data, changes, and configurations
• Foundational understanding and practical application of Integrated Product Support (IPS) elements, principles, and concepts (e.g., maintenance planning, supply support, technical data management, support equipment, training, facilities)
• 5+ years of experience in product support, sustainment engineering, or systems engineering roles within a high-rigor environment (e.g., defense, aerospace, advanced robotics, complex industrial systems)
• Familiarity with military standards, specifications, and regulatory compliance relevant to product support and sustainment activities
• Proven ability to work effectively in dynamic, unstructured environments, adapt to rapidly changing priorities, and quickly learn and master new technologies and complex systems
• Excellent written and verbal communication skills, with a demonstrated ability to synthesize complex technical and quantitative data into clear, concise decision statements and actionable recommendations for diverse audiences (engineers, operators, customers)

Preferred Qualifications

• Bachelor's degree in Engineering (Mechanical, Manufacturing, Aerospace, or related field)
• Direct experience with sustainment methodologies such as Maintenance Task Analysis (MTA), Level of Repair Analysis (LORA), Reliability Centered Maintenance (RCM), or developing Contractor Logistics Support (CLS) plans
• Proven track record of developing and delivering key customer-facing sustainment artifacts and contractual deliverables
• Prior hands-on experience with specific enterprise tools such as Siemens NX, Teamcenter (PLM), JIRA, or Oracle (ERP) or equivalent systems
• Direct experience with complex military systems, robotics, unmanned systems, or advanced defense technology products
• Understanding of the use of the Technical Data Package (drawings, parts lists, interface control documents, and electrical schematics)
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Willingness and ability to travel for on-site support, field deployments, and direct customer engagements as required

XML job scraping automation by YubHub

Your responsibilities will include monitoring and analyzing power generation systems to detect and resolve issues proactively, minimizing downtime and maximizing efficiency for the datacenter's massive computational demands. You will collaborate with cross-functional teams, including electrical engineers and datacenter operations, to integrate power systems seamlessly with AI infrastructure needs.

You will conduct regular maintenance, troubleshooting, and upgrades on turbines, generators, and control systems to support scalable power requirements. You will develop and implement strategies for energy efficiency, cost reduction, and sustainable power generation practices.

You will lead root cause analysis for any power-related incidents and drive continuous improvement initiatives. You will ensure all operations adhere to regulatory requirements, including those from local, state, and federal agencies governing natural gas plants.

You will mentor junior engineers and technicians, fostering a culture of excellence and innovation in power management.

XML job scraping automation by YubHub

This is an impactful role where you will take ownership of defining critical maintenance plans, shaping technical data packages, optimising sparing, and ensuring seamless lifecycle management. Your expertise will be vital in translating engineering innovation into reliable, supportable systems for our warfighters, directly enabling Anduril’s mission to transform defence technology.

Key responsibilities include:

Developing and maintaining comprehensive, ground-up sustainment plans for the specific product(s) you support Partnering with customers, operations teams, and cross-functional engineering teams to define, implement, and continuously improve effective maintenance and repair strategies Ensuring the availability of up-to-date maintenance procedures, specialised tools, and accurate technical manuals to support field sustainment operations Serving as the primary point of contact for all sustainment-related matters within your assigned product team, proactively identifying and resolving issues Collaborating with design and manufacturing engineering teams during new product development phases to integrate best sustainment practices and design-for-supportability concepts early in the process Creating and maintaining a Service Bill of Materials (SBOM) and other critical sustainment artefacts (e.g., provisioning lists, support equipment lists), ensuring they establish a central, up-to-date repository for all sustainment data

You will have the opportunity to work on complex military systems, robotics, unmanned systems, or advanced defence technology products, and contribute to the development of cutting-edge technologies that will shape the future of defence.

If you are a motivated and experienced engineer looking for a challenging role that will allow you to make a real impact, we encourage you to apply.

XML job scraping automation by YubHub

This is an impactful role where you will take ownership of defining critical maintenance plans, shaping technical data packages, optimizing sparing, and ensuring seamless lifecycle management. Your expertise will be vital in translating engineering innovation into reliable, supportable systems for our warfighters, directly enabling Anduril’s mission to transform defense technology.

Responsibilities:

• Develop and maintain comprehensive, ground-up sustainment plans for the specific product(s) you support
• Partner with customers, operations teams, and cross-functional engineering teams to define, implement, and continuously improve effective maintenance and repair strategies
• Ensure the availability of up-to-date maintenance procedures, specialized tools, and accurate technical manuals to support field sustainment operations
• Serve as the primary point of contact for all sustainment-related matters within your assigned product team, proactively identifying and resolving issues
• Collaborate with design and manufacturing engineering teams during new product development phases to integrate best sustainment practices and design-for-supportability concepts early in the process

Required Qualifications:

• Demonstrated detailed and extensive technical expertise in applying mechanical or systems engineering principles to complex hardware systems
• Hands-on proficiency with professional CAD software and Product Lifecycle Management (PLM) tools for managing engineering data, changes, and configurations
• Foundational understanding and practical application of Integrated Product Support (IPS) elements, principles, and concepts (e.g., maintenance planning, supply support, technical data management, support equipment, training, facilities)
• 5+ years of experience in product support, sustainment engineering, or systems engineering roles within a high-rigor environment (e.g., defense, aerospace, advanced robotics, complex industrial systems)
• Familiarity with military standards, specifications, and regulatory compliance relevant to product support and sustainment activities
• Proven ability to work effectively in dynamic, unstructured environments, adapt to rapidly changing priorities, and quickly learn and master new technologies and complex systems
• Excellent written and verbal communication skills, with a demonstrated ability to synthesize complex technical and quantitative data into clear, concise decision statements and actionable recommendations for diverse audiences (engineers, operators, customers)

Preferred Qualifications:

• Bachelor's degree in Engineering (Mechanical, Manufacturing, Aerospace, or related field)
• Direct experience with sustainment methodologies such as Maintenance Task Analysis (MTA), Level of Repair Analysis (LORA), Reliability Centered Maintenance (RCM), or developing Contractor Logistics Support (CLS) plans
• Proven track record of developing and delivering key customer-facing sustainment artifacts and contractual deliverables
• Prior hands-on experience with specific enterprise tools such as Siemens NX, Teamcenter (PLM), JIRA, or Oracle (ERP) or equivalent systems
• Direct experience with complex military systems, robotics, unmanned systems, or advanced defense technology products
• Understanding of the use of the Technical Data Package (drawings, parts lists, interface control documents, and electrical schematics)
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Willingness and ability to travel for on-site support, field deployments, and direct customer engagements as required

US Salary Range $129,000-$193,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full-time offers; and are considered part of Anduril’s total compensation package.

Additional Benefits:

• Healthcare Benefits: Comprehensive medical, dental, and vision plans at little to no cost to you.
• Income Protection: Anduril covers life and disability insurance for all employees.
• Generous time off: Highly competitive PTO plans with a holiday hiatus in December.
• Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs.
• Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting.
• Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching.
• Additional work-life services, such as legal and financial support, are also available.
• Professional Development: Annual reimbursement for professional development.
• Commuter Benefits: Company-funded commuter benefits based on your region.
• Relocation Assistance: Available depending on role eligibility.
• Retirement Savings Plan: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options.

ExperienceLevel: senior EmploymentType: full-time WorkplaceType: onsite Category: Engineering Industry: Technology SalaryRange: $129,000-$193,000 USD RequiredSkills: ["mechanical engineering", "systems engineering", "CAD software", "PLM tools", "Integrated Product Support", "military standards", "regulatory compliance"] PreferredSkills: ["sustainment methodologies", "Maintenance Task Analysis", "Level of Repair Analysis", "Reliability Centered Maintenance", "Contractor Logistics Support", "Siemens NX", "Teamcenter", "JIRA", "Oracle", "complex military systems", "robotics", "unmanned systems", "advanced defense technology products"]

XML job scraping automation by YubHub

Key responsibilities include:

• Leading and directly managing a small team of manufacturing engineers
• Running weekly 1v1/team meetings, setting prioritization focus, coordinating team scheduling, and providing concise status reporting
• Ensuring adherence to manufacturing engineering best practices
• Organizing DFX efforts and ensuring timely completion of production readiness deliverables
• Mentoring and supporting junior manufacturing engineers
• Developing and executing strategic plans for manufacturing capacity and optimization

Requirements include:

• A degree in a technical field such as engineering, math, or a hard science
• 7+ years of experience in a relevant field, preferably manufacturing or design of electromechanical hardware
• 3+ years demonstrated in-kind or direct team leadership skills
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment
• Personal experience physically manufacturing hardware via any means
• A strong passion for manufacturing and a thirst for continuous improvement
• Eligibility to obtain and maintain an active U.S. Secret security clearance

Preferred qualifications include experience in maritime robotics, electrical systems up to 400Vdc, subsea cable splicing or fabrication, and prior experience working with JIRA, Siemens NX, Teamcenter or Oracle.

XML job scraping automation by YubHub

Your key responsibilities will include:

• Passionately working across multiple programmes from development to full rate production to scale best-in-class solutions to align with maturity of manufacturing process
• Proactively identifying imbalances and bottlenecks caused by inventory processes, line layouts, parts shortages, staffing shortages, and other production constraints; flagging constraints with the appropriate owners across Supply Chain, Manufacturing Engineering, and Quality and driving to resolution
• Owning the metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilisation, process non-conformities, and inventory accuracy
• Time studying current and developing processes to ensure efficiency across warehouse and operations
• Developing processes to optimise workplans for highly variable demands across multiple sites
• Translating tools and reports into actionable tasks that impact the health of warehouse operations across a plethora of processes and sites
• Producing and maintaining tools to increase accuracy of work demand for new facilities and maturing processes using a data-driven approach using tools such as Value Stream Mapping/Process Mapping/Line Balancing techniques

To be successful in this role, you will need:

• A Bachelor's degree in engineering
• 3+ years of experience in a high-rate supply chain or manufacturing environment, where complex mechanical and/or electrical assemblies are built with heavy data utilisation
• Ability to read technical documentation such as drawings and CAD data, understanding of a variety of hardware manufacturing processes for both electronics (PCBAs, sensor hardware, etc.) and structures, mechanical components, and electromechanical systems
• Ability to travel up to 25% of the time
• Ability to relocate, if not already local to be onsite in Costa Mesa, CA

Preferred qualifications include experience with using Siemens Plant Simulation, Visual Components, or Process Simulation software to model a production line and run production scenarios, experience with department or factory design and set up, value stream mapping, flow lines, continuous flow, one piece flow, workstation design, and prior experience with a Manufacturing Execution System (MES) for production operations or Warehouse Management System (WMS).

XML job scraping automation by YubHub

The ideal candidate will have a proven track record of significantly improving Overall Equipment Efficiency through sophisticated automation enhancements and successful collaboration on new product development. If you are someone who has an analytical mindset, a relentless drive for continuous improvement in OEE, and excellent collaboration skills to work effectively across teams, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3-month training period before transitioning to Asheville, OH.

XML job scraping automation by YubHub

Key responsibilities include:

• Designing, commissioning, and upgrading control systems for Solid Rocket Motor production equipment
• Architecting, writing, and debugging Siemens PLC code
• Integrating internal and external FactoryOS software into automation equipment and production lines
• Leading root cause analysis and corrective actions for automation failures
• Installing, configuring, and tuning servo drives/VFDs

Required qualifications include:

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering, or Electrical Engineering
• 8+ years of experience in controls and automation in a production environment
• Strong skills in Siemens PLC programming (Ladder and Structured Text)
• Proficiency in servo drive and VFD configuration, PID tuning, STO/SS, etc.
• Strong knowledge of ethernet-based communication protocols (ProfiNET, ProfiSAFE, Ethernet IP.)
• Proficiency with electrical component selection and a solid foundation of wire sizing, circuit protection, and heat management in control cabinets
• Experience integrating with SCADA and OT Networking

Preferred qualifications include:

• 10+ years of experience in controls and automation in a production environment
• Experience working in an energetics facility
• Experience with control panel layout, electrical component selection, and cable routing
• Electrical troubleshooting up to 600VAC
• TUV FS Engineer certification (Functional Safety of Machinery)

XML job scraping automation by YubHub

The ideal candidate will have 5+ years of mechanical engineering experience in advanced air vehicle programs. They will be familiar with hypersonic missile systems and military standards. They will have hands-on experience integrating electrical and mechanical subsystems into high-speed air vehicles. They will be proficient in designing mechanical parts using CAD software and a strong understanding of manufacturing methods, including machining, sheet metal work, composites, 3D printing, injection molding, and composite lamination. They will have a strong understanding of mechanical engineering fundamentals and first principles. They will hold a BS or higher degree in Mechanical, Aerospace, or Electrical Engineering. They will be eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred qualifications include experience using Siemens NX and Teamcenter software. Expertise in air vehicle subsystem layouts, architectural trade studies, and vendor data evaluations is also desirable. An active DoD Top Secret security clearance is preferred. Proficiency in advanced engineering analysis, including structural, thermal, and/or electrical domains, is also a plus.

XML job scraping automation by YubHub

Your responsibilities will include:

• Owning designs from concept generation to real-world use, including avionics, mechanisms, thermal systems, fuel systems, and other general design tasks as required.
• Developing and integrating hardware on unmanned air vehicles.
• Using first principles physics as a basis for every decision.
• Leading design reviews, running analysis, visiting vendors, defining and executing hardware test plans.
• Building prototypes, analysing failures, and transitioning successful projects into production.
• Supporting critical hardware demonstrations with customers as needed.
• Travelling to test sites as needed.
• Supporting the design and analysis of composite structures, including the development of tooling essential for high-volume production.

To be successful in this role, you will need:

• A Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, Aerospace Engineering, or a related discipline.
• 3+ years of experience in mechanical design or engineering.
• Experience designing mechanical parts (CAD - Siemens NX preferred).
• Understanding of scalable manufacturing methods (machining, sheet metal, composites, 3D printing, injection moulding, etc).
• General knowledge of manufacturing processes for composites, metal components, and plastics.
• Background in first principles physics as a basis for every decision.
• Eligibility to obtain and maintain an active U.S. Secret security clearance.

Preferred qualifications include:

• Broad experience working across multiple mechanical engineering domains (e.g., mechanisms, thermal systems, avionics, fuel systems).
• 5+ years of experience in mechanical design or engineering.
• Ability to adapt designs from metal components to composites, with a basic understanding of material trade-offs.
• Knowledge of advanced manufacturing techniques for composites and plastics.
• Hands-on experience with composites and tool design, including familiarity with out-of-autoclave fabrication methods.
• Experience in thermal & structural analysis.

This role offers a highly competitive salary range of $129,000-$171,000 USD, plus highly competitive equity grants and top-tier benefits for full-time employees, including comprehensive medical, dental, and vision plans, income protection, generous time off, family planning & parenting support, mental health resources, professional development, commuter benefits, relocation assistance, and a retirement savings plan.

XML job scraping automation by YubHub

We are seeking a Harness Design Engineer to join our team. The successful candidate will provide engineering expertise to design, fabricate and integrate harness systems and represent the harness discipline on a project. They will investigate, plan, design and develop harnesses to meet various technical requirements, research, select and procure appropriate connectors, back-shells, contacts, wire, shielding, and cable construction for the product to meet appropriate environmental requirements.

Responsibilities:

• Provide the engineering expertise to design, fabricate and integrate harness systems and represent the harness discipline on a project
• Investigate, plan, design and develop harnesses to meet various technical requirements
• Research, select and procure appropriate connectors, back-shells, contacts, wire, shielding, and cable construction for the product to meet appropriate environmental requirements
• Develop and generate harness system block diagrams and wire diagrams to release for production
• Participate in design reviews and provide input to identify issues and drive design choices
• Prepare harness assembly instructions and test procedures, incorporating your knowledge of industry standards and best practices
• Provide guidance to the electrical team in identifying electrical system requirements given input from internal and external stakeholders including engineering (mechanical, electrical, software), product management, quality and compliance
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

Requirements:

• Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or equivalent
• 3+ years hands-on experience designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications
• Experience working directly with harness manufacturers to deliver high quality, high reliability products
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, 1553)
• Familiar with existing applicable harness standards as well as MIL-STD requirements
• Able to apply knowledge of SWaP for power, network and communications systems and designs
• Experience reading wire block interconnect diagrams and wire diagrams
• Exceptional organization and communication skills (both written and oral)
• Must be eligible to receive a US Security Clearance

Preferred Qualifications:

• Build 3D routed harness data files applying NX Cabling and Siemens Capital Harness
• Experience with or proficient in 3D CAD wire harness routing, such as (NX, Siemens Capital, CATIA, CREO)
• Able to read and generate formboard drawings in 2D CAD for production

XML job scraping automation by YubHub

This role is hands-on, detail-oriented, and highly cross-functional - requiring close collaboration with propulsion REs, technicians, machinists, production, controls, airframe, and flight test teams.

Responsibilities:

• Own the design and release of propulsion hardware supporting the engine, fuel, oil, and bleed air systems.
• Develop and maintain CAD models, drawings, and assemblies using Siemens NX with proper GD&T.
• Translate propulsion architecture and requirements into hardware that is manufacturable, testable, and robust in flight.
• Work directly with the machine shop, production, and technicians to support builds, resolve non-conformances, and drive iterative improvements.
• Support test campaigns by providing hardware design support, instrumentation accommodation, and rapid iteration based on test findings.
• Apply engineering judgment and analysis (e.g., hand calcs, ANSYS, FEA, GFSSP, REFPROP) to support sizing, load cases, and design validation.
• Support configuration management, BOM control, and change processes using Teamcenter or equivalent PLM.
• Participate in design reviews, interface control efforts, and root cause investigations related to propulsion hardware.

Requirements:

• Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related engineering discipline.
• 5+ years of experience in aerospace hardware design, preferably supporting propulsion systems.
• Proficiency in CAD modeling and drawing creation (NX preferred) with sound application of GD&T.
• Experience working directly with production, technicians, and machine shops to resolve real-world build issues.
• Understanding of design for manufacturing, including machining limitations, tolerance stack-ups, and assembly workflows.
• Some hands-on experience developing assembly guidance and supporting hardware builds and test integration.
• U.S. Citizenship or ability to comply with ITAR requirements.

Preferences:

• Experience with jet propulsion systems on UAVs or tactical aircraft.
• Familiarity with GFSSP, REFPROP, ANSYS, or FEA to support design trade studies and validation.
• Ability to write Python scripts for design automation, analysis, or data processing.
• Experience with interface control, fastener selection for high-vibration environments, and high-temperature materials.
• Experience designing hardware in test-driven development environments with rapid iteration cycles.
• M.S. in Aerospace Engineering or a related discipline.

XML job scraping automation by YubHub

This role is hands-on, analysis-driven, and highly cross-functional,requiring collaboration with design, fluids, controls, airframe, manufacturing, flight test, and mission teams.

Responsibilities: Act as the single-threaded owner for the engine, accountable for all technical decisions from concept to flight. Define and manage engine requirements, interfaces, integration strategy, and performance goals. Lead ground and flight testing of the engine, including instrumentation planning, data acquisition, and analysis of key performance parameters (thrust, fuel flow, margin, transients). Analyse engine performance data across the flight envelope to validate behaviour, identify anomalies, and close design-to-mission gaps. Collaborate with airframe, controls, and mission engineering teams to ensure engine integration supports aircraft-level CONOPS, manoeuvrability, and reliability. Own engine-level fault management, failure investigations, and margin assessments. Guide the development of engine control logic and tuning, including throttle schedule design and transient response shaping. Represent the engine in design reviews, technical readiness checkpoints, leadership briefings, and customer engagements.

Required qualifications: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or a related engineering discipline. 5+ years of experience in jet engine development, testing, and integration. Demonstrated ownership of engine hardware through test and flight operations. Strong knowledge of aerospace engine fundamentals, including thermodynamic cycles, thrust modelling, operability limits, and transient response. Hands-on experience in engine testing, including sensor planning, data systems, and test execution. Proficiency in Python for performance analysis, data reduction, and model correlation. U.S. Citizenship or ability to comply with ITAR requirements.

Preferred qualifications: Experience with low-bypass turbofan engines on UAVs, tactical aircraft, or similar aerospace platforms. Familiarity with GFSSP, REFPROP, ANSYS, or FEA to support performance modelling and test correlation. Experience with engine control development, feedback tuning, and transient validation. Background in rocket engine development with transferable test or turbomachinery experience. Proficiency with Siemens NX and Teamcenter for interface review and configuration context. M.S. in Aerospace Engineering or a related discipline.

XML job scraping automation by YubHub

You will serve as the focal point for all technical matters related to thrust vectoring, ensuring the system enables precise flight control authority, integrates cleanly with the engine and airframe, and performs reliably across the full range of operational conditions. This role is hands-on, data-driven, and highly cross-functional, requiring collaboration with controls, airframe, flight test, and mission teams.

Responsibilities:

• Act as the single-threaded owner for the TVC system, accountable for all technical decisions from concept to flight.
• Define and manage system requirements, performance goals, and mechanical/electrical interfaces.
• Design and integrate vectoring mechanisms with the engine and surrounding structure.
• Lead ground and flight testing of the TVC system, including instrumentation planning, data collection, and performance evaluation.
• Analyze control authority, vectoring bandwidth, and dynamic response across the flight envelope.
• Collaborate with the controls team to shape vectoring logic and ensure closed-loop system performance meets CONOPS requirements.
• Own fault management, failure investigations, and system reliability strategies.
• Represent the TVC system in design reviews, technical checkpoints, customer briefings, and leadership updates.

Qualifications:

• Bachelor's degree in aerospace engineering, Mechanical Engineering, or a related discipline.
• 7+ years of experience in aerospace propulsion or flight control systems, with relevant experience owning subsystem development.
• Deep understanding of nozzle dynamics, actuation systems, mechanical integration, and structural/thermal constraints.
• Demonstrated experience in hardware development, test planning, and flight test support.
• Strong proficiency in Python for performance analysis, data processing, and model correlation.
• Familiarity with tools such as ANSYS, FEA, or thermal/fluid modeling for mechanism and system validation.
• U.S. Citizenship or ability to comply with ITAR requirements.

Preferred Qualifications:

• Experience with TVC or control effector systems on UAVs, tactical aircraft, or rocket platforms.
• Familiarity with low-bypass turbofan engines and integration constraints near hot-end propulsion hardware.
• Experience collaborating on control logic development, transient response shaping, and actuator tuning.
• Proficiency with Siemens NX and Teamcenter for CAD and configuration control.
• Background in failure modes analysis, margin modeling, and system validation strategies.
• M.S. or Ph.D. in Aerospace Engineering or a related discipline.

XML job scraping automation by YubHub

As a Staff Fluid & Thermal Systems Engineer at Shield AI, you will lead the design, development, and optimization of fluid and thermal systems for our advanced autonomous UAVs and ground systems.

Your expertise in fluid & thermal system design will drive innovation, prototyping, testing, and the successful integration of solutions that operate reliably in challenging environments.

This role requires technical leadership, collaboration with cross-functional teams, and an unwavering commitment to delivering excellence from concept to production.

Responsibilities:

• Own design and analysis of fluid and thermal systems for aircraft and ground platforms.
• Develop and implement innovative thermal solutions
• Use first-principles engineering to drive design decisions to yield optimal solutions
• Research technologies for integration into complex solutions
• Conduct advanced simulations to predict system performance and refine designs
• Execute testing and validation efforts, including data acquisition, post-processing, and verification against requirements
• Collaborate with cross-disciplinary teams to integrate fluid and thermal system designs into larger system architectures.
• Mentor and guide junior engineers, fostering technical growth and excellence within the team.
• Identify suppliers and build successful supplier management relationships for procurement of components or systems for fluid and thermal system designs
• Other duties as assigned

Required qualifications:

• Minimum 10+ years of experience in Fluid or Thermal System design, with a proven track record of technical excellence.
• B.S. or advanced degree in Mechanical, Aerospace, or related Engineering discipline.
• Deep understanding of heat transfer, fluid dynamics, thermodynamics, and system-level thermal management.
• Experience implementing system models in commercial tools, such as MATLAB Simscape, Amesim, etc.
• Experience developing custom engineering models in Excel and in languages such as MATLAB, Python, etc.
• Experience in fluid and thermal system testing, including sensor integration, data acquisition, and analysis.
• Expertise in 3D CAD modeling tools such as Siemens NX or equivalent.
• Demonstrated ability to execute projects with minimal oversight, assume full ownership, and deliver exceptional outcomes.
• Excellence in supplier management, COTS component sourcing, optimization/trade studies
• Proven success in dynamic, fast-paced environments.

Preferred qualifications:

• Extensive experience with fluid & thermal system design, analysis, manufacture and test for aircraft
• Familiarity with fluid and thermal system effects on aircraft performance
• Familiarity with startup or R&D environments, demonstrating adaptability and agility under pressure.
• Strong knowledge of environmental standards and certification processes for aerospace or defense systems.
• A passion for innovation and the ability to push boundaries in fluid & thermal system development.

$200,000 - $310,000 a year

XML job scraping automation by YubHub

This role requires strong blueprint reading skills, advanced setup capability, and the ability to troubleshoot and optimize machining processes on the shop floor.

Key responsibilities include performing complex CNC machine setups, reading and interpreting advanced blueprints, selecting appropriate cutting tools, speeds, and feeds for various materials, holding tight tolerances, conducting first-article inspections, and using precision measuring instruments.

The ideal candidate will have 5+ years of CNC machining experience, proficiency in multi-axis machining, a strong understanding of GD&T and blueprint reading, and demonstrated ability to perform full machine setups independently.

Preferred qualifications include experience with aerospace, defense, or other high-precision manufacturing environments, quick turnaround prototype machining experience, familiarity in CAM systems, and experience operating with Siemens Controls, Fanuc, and/or DN Solutions controls.

The salary range for this position is $24 - $37 an hour, with pay within range listed plus bonus, benefits, and equity for full-time regular employees, and pay within range listed above plus temporary benefits package for temporary employees.

XML job scraping automation by YubHub

In this role, you will act as an escalation point for complex routing, packaging, and documentation challenges, partner closely with EWIS and EE engineers to ensure accurate translation of design intent, and optimize drafting workflows, automation, and data consistency across NX, Zuken E3, and PLM/configuration management systems.

You will interface with manufacturing and integration teams to prevent documentation-driven build and service issues, incorporate build feedback into standards and deliverables, train, mentor, and enable the drafting team on tools, standards, and processes, and support design reviews by proactively identifying CAD, routing, and documentation risks and driving resolution.

XML job scraping automation by YubHub

Responsibilities:

• Design, build, and validate manufacturing and assembly tooling to support the Corsair and Mirage product lines
• Interface with design and manufacturing engineering to ensure tooling design meets hardware design requirements and supports full-rate production
• Evaluate mechanical designs for potential flaws and offer modifications to eliminate potential problems
• Prepare assembly or product layout and detailed drawings applying GD&T, and participate in the manufacture or building of tooling
• Analyze tooling designs using hand calculations and finite element models
• Develop validation plans for tooling to ensure requirements are satisfied
• Ensure that design implementation, test, and maintenance methods/processes are developed and executed in a manner that supports company quality standards

Qualifications:

• Bachelor's degree or greater in Mechanical Engineering or a related field
• 2+ years designing complex manufacturing or assembly tooling
• Strong fundamentals in core engineering concepts, including statics, solid mechanics, and machine design
• Proven experience with tooling development and the entirety of the product life cycle
• Proficiency with CAD and finite element analysis software, such as Siemens NX and FEMAP
• Proven experience developing innovative solutions on a range of mechanical problems

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

XML job scraping automation by YubHub

This role involves designing, building, and testing complex mechanical structures and fluid systems that support full-scale and sub-scale vessel test campaigns in dynamic, real-world environments.

Responsibilities:

• Develop and execute test stand concepts, fabrication drawings, wiring schematics, and instrumentation lists tailored to maritime platforms
• Design, analyze, and validate structural systems, fluid systems, and dynamic mechanisms for ASV subsystems
• Supervise the build, integration, and commissioning of structural test setups, including mechanical fabrication and instrumentation
• Lead and execute rigorous mechanical and structural testing of marine components and systems, often in outdoor, field-based conditions
• Collaborate with naval architects, autonomy engineers, and control systems teams to ensure test fidelity and relevance to mission performance
• Maintain meticulous records of test data, design changes, and test reports to support traceability for DoD certification and reporting

Qualifications:

• Bachelor’s degree or greater in Mechanical Engineering, Structural Engineering or a related discipline
• 2+ years of experience designing and operating structural test equipment
• Hands-on design, analysis, and testing of mechanical structures or systems
• Professional experience with structural FEA or mechanical testing
• Proficiency with 3D CAD software (Siemens NX/Unigraphics preferred)
• Experience with: Geometric Dimensioning and Tolerancing (GD&T), Finite Element Analysis tools (ANSYS, NASTRAN, or equivalent), Design of large steel or aluminum weldments, High-pressure fluid system design, Mechanical assembly and fabrication techniques

Physical Demands:

• Prolonged periods of sitting at a desk and working on a computer
• Occasional standing and walking within the office
• Manual dexterity to operate a computer keyboard, mouse, and other office equipment
• Visual acuity to read screens, documents, and reports
• Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies
• Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Saronic pays 100% of the premium for employees and 80% for dependents
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium under the basic plan for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan with company match
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Pet Insurance: Discounted pet insurance options including 24/7 Telehealth helpline
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

XML job scraping automation by YubHub

Responsibilities:

• Own structural design of ASV systems and/or subsystems from concept through prototyping and production efforts
• Maintain and track design gates (PDR, CDR) and schedules for owned hardware
• Prepare and conduct design reviews of owned structural systems/subsystems
• Support initial prototyping and build of new ASV platforms and variants
• Support procurement of prototype hardware and supplier selection process
• Produce engineering design definition artifacts to include:
• 3d models in Siemens NX (preferred), or Solidworks
• 2d drawings that comply with applicable standards (ASME Y14.5)
• Conduct preliminary structural sizing by performing hand calculations based on engineering first principles with respect to design requirements.
• Collaborate with hardware, product development, and production to optimize designs based on understood and discovered load cases.
• Generate comprehensive technical reports and documentation to communicate design decisions, recommendations, and rationale to internal teams and stakeholders

Qualifications:

• Bachelor’s degree or greater in Mechanical Engineering or a related field
• 2+ years experience in structural analysis and simulation, using both stress hand calculations and finite element analysis (FEA) software such as Femap (preferred) or ANSYS.
• Strong understanding of structural mechanics and materials science, with experience applying these concepts to real-world engineering problems.
• Demonstrated ability to lead and mentor junior engineers, providing technical guidance and expertise in structural analysis methodologies and best practices.
• Excellent problem-solving skills and a track record of innovative thinking to address challenging engineering issues.
• Effective communication skills with the ability to convey complex technical concepts clearly and concisely to diverse audiences.
• Ability to travel as needed.

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Saronic pays 100% of the premium for employees and 80% for dependents
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium under the basic plan for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan with company match
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Pet Insurance: Discounted pet insurance options including 24/7 Telehealth helpline
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

XML job scraping automation by YubHub

Responsibilities:

Design, analyze, and optimize composite structures for autonomous maritime platforms (hulls, decks, enclosures, etc.) Create 3D CAD models and 2D manufacturing drawings using tools like SolidWorks, Siemens NX, and Fibersim Perform hand calculations to design and size laminates using CLT tools Work closely with naval architects, mechanical engineers, and autonomy teams to integrate composite structures with vessel systems Define material specifications and work with suppliers to source appropriate composite materials to include NCFs, resin systems, adhesives, and core materials Develop manufacturing plans and collaborate with in-house and external fabricators to support prototype and production builds Ensure compliance with MIL-STD and DoD structural integrity, weight, and signature management requirements Drive design-for-manufacturing (DFM) and design-for-assembly (DFA) principles Support testing, validation, and qualification of composite assemblies in lab and marine environments

Qualifications:

Bachelor’s degree or greater in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field 2+ years of experience in composite structural design (aerospace, marine, automotive, or defense) Strong understanding of composite materials (carbon fiber, fiberglass, resin infusion, etc.) and layup techniques Experience with CAD and FEA software (e.g., Femap (Preferred), ANSYS, Abaqus) Knowledge of mechanical testing, structural validation, and failure analysis of composite systems

Benefits:

Medical Insurance: Comprehensive health insurance plans covering a range of services Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 100% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company’s success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

Physical Demands:

Prolonged periods of sitting at a desk and working on a computer Occasional standing and walking within the office Manual dexterity to operate a computer keyboard, mouse, and other office equipment Visual acuity to read screens, documents, and reports Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)

Additional Information:

This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3)

XML job scraping automation by YubHub

Our Supply Chain Management Team supports the world’s most recognizable brands to design and implement a future ready operating model for supply chains that balance between Cost, Speed and Service. We enable business growth through building supply chain resilience and agility from visibility to orchestration to settlement, shifting focus from cost to high value work that transforms customer experience.

We are a global team and operating from various locations in Europe, North America, and India. We focus on consulting services around the topics of Customer Centricity, Procurement Experience, Supply Chain Planning, Smart Operations and Agile Logistics.

We’re looking for a PLM Consultant to design, implement, and optimize PLM solutions for clients across industries. You’ll combine technical expertise with consulting skills to deliver impactful results.

Key Responsibilities:

• Gather and analyze client PLM requirements and processes.
• Design and implement PLM solutions aligned with client objectives, including workflow design, data management, and integration with ERP/CRM systems.
• Configure and implement PLM systems (Siemens Teamcenter, PTC Windchill, Dassault ENOVIA, SAP PLM).
• Assist in creating PLM roadmaps, governance models, and best practices for clients.
• Support data migration, integration, testing, and user training.
• Recommend PLM best practices and process improvements.
• Collaborate with cross-functional teams to ensure successful project delivery.

Requirements:

• 3-8 years of experience in PLM implementation
• 3-8 years of consulting experience.
• Experience with PLM integration with ERP, MES, or CRM systems.
• Hands-on experience with PLM tools such as Siemens Teamcenter, PTC Windchill, Dassault ENOVIA, or SAP PLM.
• Strong understanding of product development processes, BOM management, CAD integration, and change management.
• Experience with PLM system configuration, workflows, and data modeling.
• Ability to manage multiple client engagements and deliver results in a fast-paced consulting environment.
• Knowledge of industry-specific product development processes (e.g. Manufacturing, Consumer Goods and Life-Sciences/ Pharmaceuticals).
• Certification in relevant PLM tools
• · Have experience in gathering, validating, synthesizing, documenting, and communicating data and information for a range of audiences
• · Have excellent interpersonal skills and strong written and verbal communication skills in country’s official language(s) (C2 proficiency) and English (C2 proficiency),
• Have project-related mobility/willingness to travel

_Given that this is just a short snapshot of the role we encourage you to apply even if you don't meet all the requirements listed above. We are looking for individuals who strive to make an impact and are eager to learn. If this sounds like you and you feel you have the skills and experience required, then please apply now.

XML job scraping automation by YubHub

This role will be the beginning of a lifelong pursuit of technical excellence, innovation, and customer impact at the highest level. Through technical mastery, customer partnership, and relentless innovation, you can directly contribute to making Phillips the world's best supplier of manufacturing technology.

Responsibilities

• Partner with customers to solve complex manufacturing challenges using Hybrid solutions
• Develop innovative additive and subtractive strategies on Haas Hybrid platforms to maximize precision and efficiency
• Create, simulate, and validate advanced CNC and DED toolpaths for seamless integration from design to production
• Deliver hands-on training to customers and internal teams to ensure successful adoption and productivity
• Conduct on-site and remote demonstrations, proofs-of-concept, and test cuts to showcase the full capabilities of Haas Hybrid solutions
• Continuously explore, test, and refine cutting-edge additive and subtractive processes, tooling, and materials
• Help develop repeatable, scalable process templates for common applications to accelerate customer success
• Evaluate the impact of various build variables (e.g., laser power, wire feed speed, travel rate, interpass temperature) on metallurgical properties, bonding strength, porosity, and dimensional accuracy
• Translate findings into practical application guides and training materials
• Work cross-functionally with Sales, Service, Engineering, and Marketing to support customer acquisition, onboarding, and retention
• Create detailed application reports, case studies, and technical content to support sales efforts and knowledge sharing

Requirements

• Proficiency in CAD/CAM software (Siemens NX Required)
• Proficiency running CNC machines 3, 4, and 5 axis (Haas controls would be preferred)
• Strong mechanical aptitude and understanding of machine tool operations and strategies
• Excellent problem-solving, communication, and customer-facing skills
• A willingness to be challenged while learning new technologies and giving legendary customer service
• Ability to travel extensively to customers (60-80%) via road and air nationally with potential international travel

Benefits

• All costs are covered while traveling for business
• Opportunities for professional growth and development
• Collaborative and dynamic work environment
• Recognition and rewards for outstanding performance
• Comprehensive benefits package, including medical, dental, and vision insurance, 401(k) matching, and paid time off

XML job scraping automation by YubHub

Are you a team player who thrives on responsibility, with strong analytical and logical skills? Then you are the right person to take on this challenge.

Your tasks:

• Manage the installation, configuration, maintenance, and support of Teamcenter PLM and CATIA V5 software at the server and client level in production and non-production environments.
• Collaborate with business subject matter experts, business analysts, functional leads, and technical leads from other disciplines to architect and design Teamcenter solutions.
• Develop, test, document and deploy system updates and upgrades deployment packages for the Teamcenter environment.
• Manage and coordinate Teamcenter and CATIA user issues and drive them to resolution.
• Multi-task across ongoing projects and daily duties of varying priorities as required.
• Be involved in the whole environment lifecycle: requirement collection, planning, development, automated testing, documentation, deployment and operations.

What we offer:

• Exciting projects and a place for technical freedom and innovation to get things moving.
• Attractive benefits packages, including competitive remuneration, social benefits, 30 days annual holiday, and free on-site gym.

The successful candidate will:

• Have a Bachelor degree or equivalent in computer science or engineering.
• Have a minimum of 5 years of experience in Siemens Teamcenter Engineering environment.
• Have deep experience with Teamcenter installation and configuration.
• Be able to write and speak professional English, additional German language skills are an advantage.
• Have experience with one or more of the following: Teamcenter Customization, Teamcenter Active Workspace, Siemens Active Integration (SAP), VB Macro scripting, Client Software deployment.

XML job scraping automation by YubHub

Head of Systems Design

200 - Design - Maranello, Modena

TGR Haas F1 Team has been a stalwart of the FIA Formula 1 World Championship over the past decade. With more than 200 grand prix starts to our name, we pride ourselves on being an ambitious challenger within Formula 1 - and we want you to be part of that journey.

The first American Formula 1 team to compete in the sport since 1986, TGR Haas F1 Team made an immediate impression with a memorable points-scoring debut at the 2016 Australian Grand Prix. Ten years later, the team is still building momentum, guided by clear objectives and technical partnerships, and fresh from securing its second biggest points haul in a Formula 1 season.

Yes, you’ll learn from us, but we expect to learn from you too!

General Summary:

This position reports to the Chief Designer or their designee; it is located in Maranello, Italy. Responsible for leading the Systems Design group, and for interacting and communicating with Department Managers, other DO groups, and the Aero and Vehicle Dynamics Department to achieve the best car development in terms of performance, quality, and reliability.

General Responsibilities:

• Promote teamwork and effective communications to develop trustworthy relationships between all personnel and departments.
• Responsible for the overall performance of the department, ensuring targets and milestones are achieved.
• Manage department personnel from recruitment, onboarding, employee engagement through to separation.
• Mentor, train and guide personnel as required. Develop staff using effective performance reviews and development plans.
• Other duties as assigned by the Chief Designer or their designee.

Key Responsibilities:

• Oversee and design components through solid modeling, surface modeling, and 2D drawing, with the aim of obtaining high-performance, reliable solutions and optimized sizing.
• Provide leadership and guidance to the engineers within the working group, in accordance with the tasks assigned to the group.
• The perimeter of Systems Design includes the fuel system, the cooling system, the hydraulic system, the brake system, power unit installation including related heat shielding, internal body, on-car test parts (e.g. Rakes), off-car test parts (e.g. pull down rigs) and pit stop equipment.
• Follow all safety regulations in all venues.
• Oversee the ad hoc projects as assigned.

Education and Work Experience:

• Bachelor's or Master’s Degree in Mechanical engineering or a related field.
• Extensive experience in systems and mechanical design within the motorsport industry, preferably in Formula One.
• A good working knowledge of composite design and material manufacturing is required.
• Significant experience in system and mechanical design within high‑performance motorsport, with a minimum of 10 years of experience including work on complex engineering projects, ideally gained in Formula One
• Five years of leadership experience.

Specialized Knowledge and Skills:

• Ability to supervise others, communicate effectively, and liaise with fellow workers to get desired results.
• Capable of working in a team environment to a very high standard and a positive work attitude.
• Proficiency in CAD software and other engineering tools.
• Strong communication skills, written and verbal.
• Have an excellent understanding of English language.
• Strong technical background in racing cars.
• Have an excellent understanding of F1 systems and experience in designing and optimizing thermal management systems for powertrain components.
• Knowledge of advanced materials, such as composites and lightweight alloys, and their application in high-performance automotive engineering.
• Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing).
• Ability to manage complex projects adhering to tight timelines.
• Work to consistently high standards in stressful and time sensitive situations.
• Quick decision-making skills whilst working through problems in a scientific and analytical way.
• Work well within a team environment with personnel at all levels.
• A sympathetic approach to your work colleagues and an ability to integrate within a group environment.
• A can-do positive approach and a willingness to help others is essential.

Equipment and Applications:

• CAD Software: Proficiency in using CAD software such as 3DX, CATIA or Siemens NX for designing and modeling mechanical components.
• Manufacturing Tools: Understanding of advanced manufacturing tools and techniques, including CNC machining, 3D printing, and composite layup processes.
• Basic knowledge of Telemetry software (preferably Atlas).

Work Environment Physical Demands:

An ability to work and prioritize within a high pressure, time sensitive environment while retaining a methodical approach is essential. The role may require occasional domestic, and international travel and a willingness to work long and flexible hours including weekends.

This position may require lifting to 50 pounds, repeated bending, squatting and manual dexterity. Fast-paced work environment requiring heavy mental demands. Work environment includes machinery, race cars, 7-post and other rigs, grinding debris, and hazardous fluids. All employees must ensure compliance with the Company Health and Safety Policy, and all relevant other statutory Health and Safety legislation.

Core Company Values:

Integrity: Uphold the highest standards of integrity in all actions.

Innovation: Embrace and drive change through innovative solutions.

Excellence: Strive for excellence in every aspect of work.

Collaboration: Foster a collaborative environment to achieve collective goals.

Customer Focus: Prioritize the needs and satisfaction of customers and partners.

Sustainability: Commit to sustainable practices and social responsibility

_This job description may not detail some less major duties, nor cover duties of a similar nature, which may from time to time be reasonably require

XML job scraping automation by YubHub

What you'll do

You will act as a strategic technical leader, working hands-on to architect scalable and practical solutions that meet client objectives and integrate seamlessly within their operational frameworks.

• Collaborates with stakeholders to define solution architecture aligned to business goals and enterprise standards
• Owns end-to-end solution design across systems, processes, and data—ensuring scalability, usability, and performance

What you need

• A bachelor's degree in engineering, computer science, project management, business management, or a related field is preferred
• Minimum of seven (7) years of experience in engineering, product development, or enterprise architecture within the automotive, aerospace, or discrete manufactuing industries

XML job scraping automation by YubHub

Design and development of mechanical and electrical systems, including:

• Engine and transmission (gearbox).
• Thermal management and cabin climate control (optimizing engine cooling and cabin comfort).
• Electric machines and propulsion systems.
• Vehicle dynamics and steering (control architecture and steering systems).

System modeling and simulation to validate performance and optimize functionality.

System integration: analyzing the impact of changes on the overall architecture.

Technical supplier management: evaluating international components and adapting them to national suppliers.

Collaboration on hybridization systems and electronic architecture projects.

What you need

Bachelor's degree in Mechanical, Electrical, Electronic, or Automotive Engineering.

Minimum of 5-10 years of experience in powertrain system development or similar automotive technologies, with focus on electrified powertrains.

Deep knowledge of hybrid powertrain architectures, including electric motor and battery integration.

Experience in managing engineering projects and multidisciplinary teams.

Technical experience in electronic systems architecture, engine calibration, software, and product design.

Ability to manage economic aspects (CAPEX, OPEX, PRF evolution).

Familiarity with tools such as SIEMENS NX, CATIA, ANSYS MECHANICAL, NASTRAN, FLOTHERM, FLO EFD, ESATAN, CRUISE M, EXCITE M.

Why this matters

This role contributes to conceptual and detailed design, requirements definition, subsystem integration, and functional validation, playing a key role in creating innovative platforms for critical applications.

XML job scraping automation by YubHub