As a Senior Electrical Engineer, you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever.

Key Responsibilities:

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalent with 4+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

Preferred Qualifications:

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

XML job scraping automation by YubHub

We are seeking a highly skilled Electrical Engineer to join our Maneuver Dominance team at our Costa Mesa HQ. As an Electrical Engineer, you will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever.

Responsibilities:

• Full cycle aircraft systems electrical design and integration including requirements capture, system architecture design, equipment selection, supervision or completion of wire harness build, bring-up, test, and rework.

• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools.

• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking).

• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem.

• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.

• Work in a fast-paced environment supporting new developments and customer operated hardware.

• Conduct peer-level and cross-discipline design reviews.

• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.

• Conduct vehicle platform system design & analysis as required by your supported program or effort.

• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards.

• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalent.

• 3+ years of experience (non-internship) designing, testing, and troubleshooting complex board designs.

• Knowledge of modern analog and digital electronics and electronic circuits.

• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.

• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.

• Familiarity with common MCU, CPU, FPGA devices and technologies.

• Familiarity with software development processes and tools such as git, Github, JIRA, etc.

• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable).

• Experience in design for signal integrity / power integrity.

• Experience with battery systems and ability to support alternate battery systems design.

• Experience with high reliability systems.

• Experience with radio frequency-based systems.

• Experience with rapid payload/sensor integration.

• Experience in designing and integrating high power electronics.

• Experience in fieldable system design.

• Comfortable in conducting worst case circuit or uncertainty analysis.

• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it.

• Eligible to obtain and maintain an active U.S. Secret security clearance.

• Ability to travel 25% with potential surges above 25%.

Preferred Qualifications:

• Experience designing electrical and power systems for autonomous rotorcraft.

• Experience with battery systems both primary and secondary chemistries.

• Experience with High Voltage Power Electronics.

• Experience with inverters and high power electric motors.

• Understanding of MIL-STD-461, MIL-STD-810G.

• Outstanding leadership and interpersonal skills.

• Familiarity with running a qualification campaign for flight hardware.

• Familiarity with designing for rugged environments.

• Experience with electro-mechanical and electrical design concepts.

• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

Salary Range: $132,000-$171,000 USD

XML job scraping automation by YubHub

Your primary responsibilities will include determining and developing various approaches to achieve test and evaluation goals, guiding and performing the completion of test activities, and supporting or leading test planning, establishing test measures of success, conducting test (ground and flight), analyzing test performance, and producing high-quality reports to inform future development.

You will have the opportunity to work on new aircraft development, with an emphasis on electronics, avionics, propulsion, flight characteristics, rugged design, and quality at scale. You will also have the chance to work with a variety of technologies, including COTS and bespoke UAS technologies, and to develop your skills in data analysis and interpretation.

If you are interested in working in a fast-paced and dynamic environment where your work directly impacts the products that are fielded, this could be an excellent opportunity for you.

Required Qualifications:

• Master's degree in an applicable field of engineering
• 3+ years' flight test experience
• Expertise and working knowledge of UAS operating rules and regulations in the UK
• Experience in designing and executing rigorous test protocols for new and developmental systems and skillful in data analysis
• Thorough understanding of COTS and bespoke UAS technologies
• Expertise of internal combustion, electric, and/or hybrid powertrains
• Knowledge of flight control systems and flight dynamics of small, medium, and/or large rotorcraft
• Knowledge of EO/IR/Lidar sensor payloads and the intricacies required to plan and execute tests when deployed on maneuverable rotorcraft
• An understanding of and passion for engineering quality concepts, principles, codes, and experience demonstrating a broad application of those concepts
• Quick learner with the capacity to accurately implement new concepts and effectively organize, schedule, and manage multiple project phases
• Strong communication skills, both written and verbal, with strong interpersonal abilities
• Comfortable in a dynamic, team-oriented environment performing complex tasks in one or more engineering areas
• Flexibility to work additional hours and travel for testing activities as required by the business
• Valid driver's license
• Ability to immediately obtain and maintain a UK security clearance

Preferred Qualifications:

• Formal T&E training at a recognized Test Pilot School
• Experience within developmental and operational test & evaluation organizations
• Direct experience with UAS design or operational deployment
• Advanced knowledge of UAV testing methodologies and data analysis
• Hold UK General VLOS Certificate
• Remote pilot experience on VTOL UAS
• Ability to travel up to 50% of the time
• Familiarity with programming languages such as Go, Java, C++, Python, JavaScript, etc

Salary: £60,000-£80,000 per year

Benefits:

• Comprehensive medical, dental, and vision plans at little to no cost to you (US roles)
• We cover full cost of medical insurance premiums for you and your dependents (UK & AUS roles)
• We offer an annual contribution toward your private health insurance for you and your dependents (IE roles)
• Income Protection: Anduril covers life and disability insurance for all employees
• Generous time off: Highly competitive PTO plans with a holiday hiatus in December
• Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs
• Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting
• Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching
• Additional work-life services, such as legal and financial support, are also available
• Professional Development: Annual reimbursement for professional development
• Commuter Benefits: Company-funded commuter benefits based on your region
• Relocation Assistance: Available depending on role eligibility
• Retirement Savings Plan: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options (US roles)
• Pension plan with employer match (UK & IE roles)
• Superannuation plan (AUS roles)

XML job scraping automation by YubHub

As the Lead Airframe Engineer, you will be responsible for building, mentoring, and managing a diverse team of aerospace engineers, ensuring that their expertise is synergistically aligned with the project's strategic objectives, engineering milestones, and overall air vehicle design efforts. You will execute rapid evaluation of engineering concepts in a wide range of fields, perform trade studies and physics-based analysis of blue-sky engineering problems, and design, implementation, and test of complex air vehicle.

The successful candidate will have a bachelor's degree in Aerospace Engineering, Mechanical Engineer, Robotics, Physics, or related technical discipline, with a minimum of 8 years in technical leadership roles such as Technical Program Manager, Chief Engineer, Lead Engineer or similarly relevant position. Leadership experience in engineering team management and project execution for aerospace or defense sectors is required. Deep experience developing rotary-wing VTOL platforms is also necessary.

XML job scraping automation by YubHub