The Chemical Operator will support Standard Nuclear's chemical processing and materials production operations by operating, monitoring, and maintaining equipment used in sol-gel processing and chemical dissolution systems.
\nThis is a hands-on role involving solution mixing, reactor operation, particulate washing and drying, filtration, liquid waste handling, and general materials processing.
\nOperators will be cross-trained across multiple systems and will support operations in Standard Nuclear's Idaho Facility to ensure consistent production output.
\nThis position requires mechanical aptitude, attention to detail, and the ability to follow procedures closely.
\nPrior experience with the specific equipment or processes is not required , strong operators from chemical, industrial, or manufacturing environments are encouraged to apply.
\nResponsibilities:
\nSol-Gel & Dissolution Operations
\nOperate equipment used in sol-gel processing, including mixers, vibratory pumps, wash systems, heating/drying units, and filtration systems.
\nPrepare chemical solutions by measuring, mixing, and adjusting feed components according to established procedures.
\nSupport dissolution processes involving powders, aqueous solutions, and controlled chemical reactions.
\nPerform washing steps using oxide solutions and rinsing equipment to clean or condition material batches.
\nChemical Handling & Process Execution
\nHandle chemical powders, solutions, and liquid waste streams following approved safety practices.
\nMonitor process parameters, system pressures, solution levels, temperatures, and flow rates.
\nDocument batch data, equipment readings, and process deviations accurately.
\nConduct routine cleaning, equipment resets, and system preparation between production runs.
\nEquipment Operation & Troubleshooting
\nOperate pumps, valves, pneumatic systems, heaters, furnaces, filtration modules, and separation equipment.
\nPerform basic troubleshooting on mechanical and chemical processing systems.
\nAssist maintenance or engineering staff with system adjustments, repairs, or calibration activities.
\nSafety, Quality & Compliance
\nFollow all Standard Nuclear environmental, health, and safety (EH&S) requirements, including hazardous material handling and PPE protocols.
\nMaintain accurate records in accordance with quality assurance procedures.
\nSupport internal audits, inspections, and readiness reviews.
\nAdhere strictly to written procedures and report any deviations or safety concerns immediately.
\nCross-Training & Production Support
\nTrain across multiple chemical processing areas to provide operational flexibility.
\nSupport production operations across Standard Nuclear's Idaho facility as needed.
\nCollaborate with engineering, quality, and operations teams to improve process consistency and efficiency.
\nPreferred Qualifications
\nMinimum Requirements
\n3+ years of experience in chemical processing, industrial manufacturing, or mechanical/process operations.
\nAbility to safely handle powders, solutions, pumps, mixers, and industrial processing equipment.
\nFamiliarity with basic chemical handling and general industrial safety practices.
\nComfortable working with wash solutions, liquid waste systems, and cleaning processes.
\nAbility to follow detailed procedures and record accurate operational data.
\nAbility to lift 50 lbs., work at heights, and work in environments involving heat, noise, or odors.
\nAbility to work in controlled or restricted areas with required PPE.
\nPreferred Experience (Not Required)
\nExperience in sol-gel processing, wet chemistry, or materials processing.
\nPrior work with reactors, mixing systems, dry/wet separation equipment, or filtration modules.
\nExperience in plant start-up, new equipment commissioning, or scale-up environments.
\nExposure to regulated operations (NQA-1, ISO, cGMP, etc.).
\nLean/Six Sigma or continuous improvement familiarity.
\nBenefits
\nHealth, Dental & Vision Insurance
\nHealth Savings Account
\nDisability and Life Insurance
\n401K Plan
\nPaid Time Off, Holidays
\nWork Environment
\nThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
\nWork is performed in chemical processing and industrial manufacturing areas.
\nPPE such as gloves, safety glasses, and respirators may be required.
\nSome work occurs in controlled or restricted-access environments involving powders and chemical solutions.
\nStandard Nuclear embraces equal opportunity and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.
\nTo conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
\nXML job scraping automation by YubHub
","url":"https://yubhub.co/jobs/job_5bc4d3bc-9a7","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Standard Nuclear","sameAs":"https://standardnuclearinc.com","logo":"https://logos.yubhub.co/standardnuclearinc.com.png"},"x-apply-url":"https://job-boards.greenhouse.io/standardnuclearinc/jobs/5130762008","x-work-arrangement":"onsite","x-experience-level":"entry","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["chemical processing","sol-gel processing","chemical dissolution systems","equipment operation","mechanical aptitude","attention to detail","procedure following","chemical handling","liquid waste handling","filtration","washing and drying","reactor operation","solution mixing","particulate washing","dry/wet separation equipment","filtration modules","pumps","valves","pneumatic systems","heaters","furnaces","separation equipment","basic troubleshooting","system adjustments","repairs","calibration activities","hazardous material handling","PPE protocols","quality assurance procedures","internal audits","inspections","readiness reviews","written procedures","safety concerns"],"x-skills-preferred":[],"datePosted":"2026-04-17T12:59:24.941Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Idaho Falls, ID"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Manufacturing","skills":"chemical processing, sol-gel processing, chemical dissolution systems, equipment operation, mechanical aptitude, attention to detail, procedure following, chemical handling, liquid waste handling, filtration, washing and drying, reactor operation, solution mixing, particulate washing, dry/wet separation equipment, filtration modules, pumps, valves, pneumatic systems, heaters, furnaces, separation equipment, basic troubleshooting, system adjustments, repairs, calibration activities, hazardous material handling, PPE protocols, quality assurance procedures, internal audits, inspections, readiness reviews, written procedures, safety concerns"}]}