As a Power & Resource Efficiency Engineer, you'll sit at the intersection of IT and facilities , building the systems, models, and control loops that optimize how we allocate and consume power, cooling, and physical capacity across our TPU/GPU fleet.

You'll own the technical strategy for turning raw data center capacity into reliable, efficient compute, working across power topology, workload scheduling, and real-time telemetry to push utilization as close to the physical envelope as possible while maintaining our availability commitments.

Responsibilities

• Build models that forecast consumption across electrical and mechanical subsystems, informing capacity planning, energy procurement, oversubscription targets and risks, including statistical modeling of cluster utilization, workload profiles, and failure modes.

• Design IT/OT interfaces that bridge compute orchestration with facility controls, enabling real-time telemetry across accelerator hardware, power distribution, cooling, and schedulers.

• Build and operate load management systems that use power and cooling topology to enable load management and power/thermal-aware placement to maximize throughput while meeting SLOs.

• Partner with data center providers to drive design optimizations and hold them accountable to SLA-grade performance standards, providing technical diligence on partner architectures.

What We're Looking For

• Deep knowledge of data center power distribution and cooling architectures, and how they interact with IT load profiles. Experience with reliability engineering, SLA development, and failure-mode analysis.

• Proficiency in statistical modeling and simulation for infrastructure capacity or power utilization.

• Familiarity with SCADA/BMS/EPMS, telemetry pipelines, and control systems. Experience building software that bridges IT and OT.

• Exposure to accelerator deployments and their power management interfaces strongly preferred.

• Demand response, grid interaction, or behind-the-meter generation experience is a plus.

• Ability to translate between infrastructure engineering, software teams, and external partners.

Required Qualifications

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Power Systems, Controls Engineering, or a related field.

• 5+ years of experience in data center infrastructure or facility engineering.

• Demonstrated experience with data center power distribution and cooling system architectures.

• Experience building or operating software-based power management, load scheduling, or control systems.

• Proficiency in Python or similar languages for statistical modeling, simulation, or automation of data center infrastructure optimizations.

• Familiarity with SCADA, BMS, EPMS, or industrial control systems and associated protocols (Modbus, BACnet, SNMP).

• Track record of cross-functional collaboration across hardware, software, and facilities teams.

Preferred Qualifications

• Master's or PhD in Controls, Power Systems, or related discipline and 3+ years of experience in data center infrastructure or facility engineering.

• Experience with accelerator-class deployments and their power management interfaces.

• Background in control theory, dynamical systems, or cyber-physical systems design.

• Experience with energy storage, microgrid integration, demand response, or behind-the-meter generation.

• Familiarity with reliability engineering methods.

• Experience with SLA development, availability modeling, or service credit frameworks.

• Exposure to ML/optimization techniques applied to infrastructure or energy systems.

Salary

The annual compensation range for this role is $320,000-$405,000 USD.

Benefits

We offer competitive compensation and benefits, optional equity donation matching, generous vacation and parental leave, flexible working hours, and a lovely office space in which to collaborate with our team.

XML job scraping automation by YubHub

Responsibilities:

• Perform detailed configuration and programming of SEL protective relays (e.g., SEL-751, SEL-787, SEL-700G, etc.) using acSELerator QuickSet and SEL Grid Configurator.
• Develop and implement custom automation logic in SEL RTAC platforms using acSELerator Architect, IEC 61131-3 languages (Structured Text, Ladder Logic), and SEL Logic Engine.
• Design and test SCADA communication protocols including DNP3, Modbus, IEC 61850 GOOSE/MMS, and SEL protocols over Ethernet and serial interfaces.
• Conduct factory acceptance testing (FAT), site acceptance testing (SAT), relay setting validation, and end-to-end functional verification.
• Generate comprehensive documentation: one-line diagrams, logic diagrams, setting files, HMI screens, and commissioning reports.
• Provide technical support during system energization, troubleshooting, and post-commissioning maintenance.
• Collaborate with project managers, SCADA engineers, and field crews to ensure seamless integration and schedule compliance.
• Remain current with SEL firmware updates, NERC CIP cybersecurity requirements, and industry best practices.

Basic Qualifications:

• Advanced proficiency in acSELerator QuickSet, Architect, and RTAC Web Interface.
• Demonstrated ability to develop complex automation sequences, synchrophasor applications, and remedial action schemes.
• Expertise in relay event analysis using SEL SynchroWAVE and Event Reporter.
• Familiarity with IEC 61850 configuration via SCL files (SCD, ICD, CID).
• SEL Authorized Training (e.g., SEL-5030, SEL-5033) preferred; PE license a plus but not required.

XML job scraping automation by YubHub

Responsibilities:

• Install, calibrate, and commission instrumentation and control system components including sensors, transmitters, valves, actuators, and controllers
• Perform routine preventive maintenance on PLCs, HMIs, VFDs, and associated field devices
• Troubleshoot and diagnose electrical, pneumatic, and control system faults using schematics, ladder logic, and diagnostic tools
• Assist controls engineers with system upgrades, modifications, and startup activities
• Monitor and maintain SCADA/HMI systems, reporting anomalies and performing basic configuration changes as directed
• Read and interpret electrical schematics, P&IDs, loop diagrams, and technical manuals
• Document maintenance activities, equipment history, and calibration records in the CMMS
• Maintain instrument calibration records and ensure traceability to applicable standards
• Follow all safety procedures including LOTO (Lockout/Tagout), arc flash, and confined space protocols
• Coordinate with operations to minimize process disruptions during maintenance windows
• Support reliability improvement initiatives and root cause analysis (RCA) efforts

Qualifications:

• Associate's degree or technical diploma in Instrumentation, Electrical Technology, Electronics, or a related field , or equivalent military/vocational training
• 2+ years of hands-on experience in industrial instrumentation and controls maintenance
• Working knowledge of PLC systems (e.g., Allen-Bradley, Siemens) and the ability to navigate and monitor ladder logic
• Experience with instrumentation calibration tools and procedures
• Solid understanding of 4-20mA loops, HART communication, and discrete wiring
• Ability to read and interpret electrical drawings, P&IDs, and loop sheets
• Familiarity with industrial safety practices including LOTO and electrical safety (NFPA 70E)

Preferred Qualifications:

• ISA Certified Control Systems Technician (CCST) – Level I or II
• Experience with pneumatic and electro-pneumatic control valve maintenance
• Familiarity with industrial communication protocols (Modbus, Profibus, EtherNet/IP)
• Experience using a CMMS (e.g., SAP PM, Maximo, Infor)
• Knowledge of functional safety and safety instrumented systems (SIS)
• Experience in Oil & Gas / Manufacturing / Maritime

Physical Requirements:

• Must be able to work at heights, in confined spaces, and in outdoor environments as needed
• Ability to lift up to 50 lbs and stand for extended periods
• May require shift work, on-call rotation, or overtime during shutdowns and emergencies

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

XML job scraping automation by YubHub