As a Senior Electrical Engineer, you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever.

Key Responsibilities:

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalent with 4+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

Preferred Qualifications:

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

XML job scraping automation by YubHub

We are seeking a highly skilled Electrical Engineer to join our Maneuver Dominance team at our Costa Mesa HQ. As an Electrical Engineer, you will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever.

Responsibilities:

• Full cycle aircraft systems electrical design and integration including requirements capture, system architecture design, equipment selection, supervision or completion of wire harness build, bring-up, test, and rework.

• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools.

• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking).

• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem.

• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.

• Work in a fast-paced environment supporting new developments and customer operated hardware.

• Conduct peer-level and cross-discipline design reviews.

• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.

• Conduct vehicle platform system design & analysis as required by your supported program or effort.

• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards.

• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalent.

• 3+ years of experience (non-internship) designing, testing, and troubleshooting complex board designs.

• Knowledge of modern analog and digital electronics and electronic circuits.

• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.

• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.

• Familiarity with common MCU, CPU, FPGA devices and technologies.

• Familiarity with software development processes and tools such as git, Github, JIRA, etc.

• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable).

• Experience in design for signal integrity / power integrity.

• Experience with battery systems and ability to support alternate battery systems design.

• Experience with high reliability systems.

• Experience with radio frequency-based systems.

• Experience with rapid payload/sensor integration.

• Experience in designing and integrating high power electronics.

• Experience in fieldable system design.

• Comfortable in conducting worst case circuit or uncertainty analysis.

• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it.

• Eligible to obtain and maintain an active U.S. Secret security clearance.

• Ability to travel 25% with potential surges above 25%.

Preferred Qualifications:

• Experience designing electrical and power systems for autonomous rotorcraft.

• Experience with battery systems both primary and secondary chemistries.

• Experience with High Voltage Power Electronics.

• Experience with inverters and high power electric motors.

• Understanding of MIL-STD-461, MIL-STD-810G.

• Outstanding leadership and interpersonal skills.

• Familiarity with running a qualification campaign for flight hardware.

• Familiarity with designing for rugged environments.

• Experience with electro-mechanical and electrical design concepts.

• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

Salary Range: $132,000-$171,000 USD

XML job scraping automation by YubHub

As a Senior Electrical Engineer (TEMPEST), you will be responsible for evaluating high-speed digital, precision analog, RF, and high-power designs for EMI/EMC compliance. You will use EMC simulation tools to predict and analyze electromagnetic performance of electronic systems, work with cross-functional teams to integrate EMI/EMC considerations into product design, and drive product maturity through rapid prototyping, design verification, and qualification activities.

You will apply modern design standards and guidelines to create high-reliability, highly manufacturable assemblies, conduct peer-level and cross-discipline design reviews, conduct tests to assess electromagnetic emissions and susceptibility performance, troubleshoot and resolve EMI/EMC performance issues throughout the product lifecycle, and work in a fast-paced environment, having to juggle multiple concurrent projects and customers.

You will define EMI/EMC design guidelines and best practices, stay updated on military and avionics EMI/EMC standards, regulations, and best practices (MIL-STD-461, DO-160), and possess a strong mathematical background with the ability to drive EMI/EMC simulation tools to generate system performance models.

You will have 7+ years of professional experience in designing hardware products for EMI/EMC compliance, knowledge of EMI/EMC Test Equipment such as spectrum analyzers, antennas, LISN, etc., and full understanding of PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements.

You will be able to read and interpret schematics and apply best practices appropriate for each design, familiar with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc., and familiar with common MCU, CPU, FPGA devices and technologies.

You will have knowledge of modern analog and digital electronics and electronic circuits, ability to determine work priorities based on broad direction from management, experience using Altium Designer or equivalent E-CAD tools, excellent communication skills and ability to work effectively with others, and ability to work within our company and team culture.

You will currently possess and be able to maintain an active U.S. Secret security clearance.

US Salary Range: $146,000-$194,000 USD

XML job scraping automation by YubHub