You will own a project that ties directly to our critical path avionics development while receiving direct mentorship from Senior Electrical Engineers and other cross-functional leads. Our team looks for engineers that value first principles engineering and extreme ownership.

Responsibilities: Design efforts include circuit design for our embedded system, system integration and verification, environmental test, qualification, and automation, debug, root cause, and drive resolution. Systems must be designed for high-reliability, radiation, aggressive temperature changes, and high-magnitude vibration.

Required qualifications: Have a degree in Electrical Engineering or equivalent, Strong technical fundamentals, Have been part of an engineering team/club, Experience with electrical design software, Altium, KiCAD, etc.

XML job scraping automation by YubHub

Shield AI is seeking an exceptional Co-op candidate to join the team in building our autonomous aircraft. You will join a team of highly talented cross-functional engineers that exhibit a culture of mentorship, kindness, ownership, and hard work.

The ideal start date is January 2027, and the end date is flexible.

Responsibilities:

• You will be given ownership of a project that is tailored to the start date, duration, and location of your Co-op.
• Your work will directly contribute to the success of our novel aircraft development program. You will understand exactly why your project matters and how it ties into our critical path development objectives.
• You will be partnered with a senior engineer as mentor and guide for technical input and professional development.

Examples of projects:

• Design a circuit board involving analog, digital, mixed signal, high speed circuits that enables us to test a prototype flight computer.
• Design, simulate, and verify high voltage power electronics (>10kW) DC/DC Converters and DC/AC inverters.
• Work with a senior engineer to bring-up and validate a new Avionics system.
• Identify bugs and drive changes to fix them.
• Build a test rack to deliver fully automated test coverage of a flight critical sub-system.
• Run a HALT campaign to ensure a series of new circuit boards are highly reliable.

Requirements:

• Have completed at least the 2nd year of a relevant degree. Typically, Electrical Engineering.
• Strong technical fundamentals.
• Have been part of an engineering team/club.
• Experience with electrical design software and tools such as Altium, KiCAD, an oscilloscope, etc.
• Demonstrated history of showing ownership of project outcomes and delivering exceptional results.
• Record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others.

$40 - $56 an hour

Rising Bachelor's graduate = $40/hour

Rising Master's graduate = $45/hour

Rising PhD graduate = $56/hour

+ Housing stipend provided for those who qualify.

This role may also be eligible for certain benefits like PTO, 401k, healthcare, etc.

#intern

Full-time regular employee offer package:

Pay within range listed + Bonus + Benefits + Equity

Temporary employee offer package:

Pay within range listed above + temporary benefits package (applicable after 60 days of employment)

Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information.

XML job scraping automation by YubHub

Our team looks for engineers that value first principles engineering and extreme ownership.

Responsibilities:

• Own a design that directly impacts the X-BAT system and major flight test milestones. A senior engineer is assigned as a direct mentor to provide technical review and professional feedback.
• Full lifecycle ownership: concept, design, verification, integration, flight test, and manufacturing
• Design efforts include:
• Circuit design for our embedded system. You will design with analog, digital, power conversion, high-speed, FPGA, MCU, EMI/EMC, etc.
• System integration and verification
• Environmental test, qualification, and automation
• Debug, root cause, and drive resolution
• Systems must be designed for high-reliability, radiation, aggressive temperature changes, and high-magnitude vibration

Qualifications:

• Have a degree in Electrical Engineering or equivalent
• Strong technical fundamentals
• Have been part of an engineering team/club
• Experience with electrical design software, Altium, KiCAD, etc.

XML job scraping automation by YubHub

Your responsibilities will include:

• Designing circuitry for our embedded system, incorporating analog, digital, power conversion, high-speed, FPGA, MCU, EMI/EMC, and other components
• System integration and verification
• Environmental testing, qualification, and automation
• Debugging, root cause analysis, and driving resolution

You will be expected to design systems for high-reliability, radiation resistance, aggressive temperature changes, and high-magnitude vibration.

As a member of our team, you will receive direct mentorship and technical review from Senior Electrical Engineers, and have the opportunity to contribute to the development of our X-BAT system.

We are looking for engineers who value first principles engineering and extreme ownership, and are eager to take on new challenges and learn from experienced professionals.

XML job scraping automation by YubHub

We're looking for an entry-level Power Electronics Engineer who is excited to help bring X-BAT's next-generation power systems to first flight. In this role, you will own a meaningful project directly tied to our power architecture critical path, while receiving direct mentorship from senior power and electrical engineers.

Responsibilities:

• Own a power electronics design that directly impacts X-BAT system performance and major flight test milestones, supported by a senior engineer who provides technical guidance and review.
• Contribute to the full hardware lifecycle including concept development, modeling, worst-case analysis, schematic capture, simulation, prototyping, bring-up, verification, integration, and flight test support.
• Design and analyze low-voltage and high-voltage power systems including DC-DC converters, inverters, motor controllers, battery systems, power distribution, and protection circuits.
• Design systems across power ranges from < kW low-power loads to >10 kW high-power applications while balancing efficiency, thermal constraints, EMI/EMC performance, and reliability.
• Partner with ECAD engineers on PCB layout for power density, thermal performance, EMI mitigation, and manufacturability.
• Execute hands-on board bring-up, debug, root-cause analysis, and validation using oscilloscopes, power supplies, electronic loads, and other test equipment.
• Support environmental, stress, and qualification testing (HALT, vibration, temperature cycling) for aerospace-grade reliability.
• Collaborate closely with Mechanical, Embedded, Software, Production, and Aircraft teams to ensure robust system integration and clear interface ownership.
• Drive disciplined engineering practices including documentation, risk reduction, and closing the loop between analysis and test results.

Requirements:

• B.S. in Electrical Engineering or equivalent.
• Strong technical fundamentals in circuits, electronics, and power systems.
• Hands-on experience (coursework, labs, clubs, or internships) with power electronics such as converters, motor drivers, batteries, or high-power systems.
• Familiarity with electrical design tools (Altium, KiCad, etc.).
• Experience using lab equipment such as oscilloscopes, power supplies, e-loads, and multimeters.
• Participation in an engineering team/club or hands-on project experience.

XML job scraping automation by YubHub

What we’re looking for:

We are seeking a highly skilled and motivated individual to join our Technical Department – R&D team in Pisa, Italy. The successful candidate will be responsible for designing and developing electrical circuits and systems for our high-performance vehicles.

Requirements:

• Diploma in Elettronica o in Telecomunicazioni
• Buona conoscenza dei linguaggi di programmazione: C, C++
• Buona conoscenza di almeno uno dei principali strumenti di design, tra cui Altium Designer e Kicad
• Buona capacità di lettura schemi elettrici
• Buona conoscenza strumentazioni di analisi, come Oscilloscopio e Multimetro.
• Richiesta buona manualità
• Buona conoscenza della lingua inglese (livello B1) ed italiana (B2).
• Disponibilità a trasferte lavorative, sia in Italia che all’estero.

Responsabilità:

• Realizzazione di schemi elettrici e sbroglio per attività di test
• Esecuzione delle attività di test e di debug dei prodotti
• Definizione e test Cablaggi
• Installazione e assistenza sul campo in occasione degli eventi di campionati automobilistici internazionali, tra cui Campionato del Mondo Rally, Formula E

Benefits

• Competitive salary and benefits package
• Opportunity to work on high-profile projects
• Collaborative and dynamic work environment
• Professional development and training opportunities

How to Apply

If you are a motivated and experienced individual looking for a new challenge, please submit your application, including your CV and a cover letter, to [insert contact email or link to application portal].

XML job scraping automation by YubHub

15/05/2025

Corporate Branch in Pisa – Italy

[\[Discover More\]](https://www.racingforce.com/vacancy/corporate-apparel-department-candidate/)

Job Description

What we’re looking for:

Racing Force Spa is looking for resources who will be involved in activities related to:

• hardware design of analog and digital circuits

• Firmware development

• software development on embedded systems

• Preparation / support of field activities

Requirements

Ideal candidates have a three-year or specialist degree in electronic engineering / telecommunications and / or similar and have deepened their knowledge, even at university level, of at least one of the following tools:

• Programming languages: C, C ++, VHDL;

• Hardware design CAD: KiCad, Altium

• FPGA and Microcontroller programming;

Knowledge of the English language and the willingness to carry out European and non-European business trips are also required.

Employment Contract

Employment contract: full time

XML job scraping automation by YubHub