The Quality Inspector will support the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Experience with Calibrated equipment (calipers, micrometers, CMM etc.) is required. Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD) is also required. Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing is necessary. Experience with inspection of machined parts and mechanical assemblies is required. Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses) is also required. Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard is necessary. Experience with validation and testing assemblies and their components is required. Experience with communicating with suppliers and cross functional teams is necessary. U.S. Person Status is required as this position needs to access controlled data.

Technical or Associates degree in related quality/mechanical/aerospace engineering field is preferred. 3+ years experience in a quality assurance or inspection role in a manufacturing/production setting is also preferred. IPC-A-610 or IPC-A-620 Certification is preferred. Basic knowledge using various measuring tools and hand tools (e.g. tape measure, caliper, micrometer, drivers etc.) is necessary. Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD) is preferred. Knowledge of First Article Inspection requirements and processes is necessary. Highly motivated team player who is willing to support a fast paced team environment is required. Detail oriented self starter with minimal oversight is necessary. Strong ability to communicate with different cross functional teams is required. Able to obtain and maintain an active U.S. Secret security clearance is necessary.

US Hourly Range $25-$33 USD. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits - US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. - UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. - IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits - Income Protection: Anduril covers life and disability insurance for all employees. - Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. - Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. - Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. - Professional Development: Annual reimbursement for professional development - Commuter Benefits: Company-funded commuter benefits based on your region. - Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan - US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. - UK & IE Roles: Pension plan with employer match. - AUS Roles: Superannuation plan.

XML job scraping automation by YubHub

The Quality team is responsible for a wide range of activities that are crucial to the manufacturing process including operating equipment, assembling products, performing quality control checks, and maintaining a safe and efficient work environment.

The Quality Inspector will support the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Required qualifications include experience with calibrated equipment, reading and interpreting engineering drawings, geometric dimensioning and tolerancing knowledge, and experience with inspection of machined parts and mechanical assemblies.

Preferred qualifications include technical or associates degree in a related quality/mechanical/aerospace engineering field, 3+ years experience in a quality assurance or inspection role in a manufacturing/production setting, and IPC-A-610 or IPC-A-620 certification.

XML job scraping automation by YubHub

The Quality team works with our internal teams, customers, and suppliers to ensure the deployment of reliable products that meet all mission requirements. The Quality Inspector will support the Manufacturing/Production teams and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner.

Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, raise non-conformance tickets for triage, support product traceability, take corrective action, and implement standards/specifications/processes cross-functionally with Quality Teams.

Key responsibilities include:

Working in a modern manufacturing environment on incoming inspection, in-process inspection, and end-of-line inspection. Supporting Material Review Board processes. Proposing, developing, and implementing quality assurance policies and procedures and reviewing with product quality and manufacturing engineers. Reviewing and proposing continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy. Supporting the calibration process of test equipment, jigs, and fixtures. Coordinating calibration. Supporting internal and external audits on processes and procedures.

Requirements include:

Experience with calibrated equipment (calipers, micrometers, CMM, scanning, torque, multimeters, etc.). Experience reading and interpreting engineering drawings (wire diagrams, work instructions, MBD drawings). Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing. Experience with inspection of CNC machined parts, fabricated weldments, and mechanical assemblies. Experience with inspection of electrical and electronic components (PCBs, wire-harnesses). Experience in a facility with AS9100, ISO9001, or similar QMS standard. Experience with communicating in cross-functional teams and with suppliers as needed. Ability to obtain and maintain an Australian Government Security Clearance.

Preferred qualifications include:

Technical or Associate's degree in a related quality/mechanical/aerospace engineering field. IPC-A-610 or IPC-A-620 certification. Experience with manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD). Experience with auditing processes and procedures in a manufacturing environment. Detail-oriented self-starter with minimal oversight. Strong ability to communicate with different cross-functional teams. Knowledge of First Article Inspection requirements and processes. Knowledge of maritime vessel requirements. Experience with validation and testing assemblies and their components.

Salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education, and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full-time offers; and are considered part of Anduril's total compensation package.

Additional benefits include:

Healthcare benefits - comprehensive medical, dental, and vision plans at little to no cost to you. Income protection - Anduril covers life and disability insurance for all employees. Generous time off - highly competitive PTO plans with a holiday hiatus in December. Caregiver and wellness leave is available to care for family members, bond with a new baby, or address your own medical needs. Family planning and parenting support - coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental health resources - access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional development - annual reimbursement for professional development. Commuter benefits - company-funded commuter benefits based on your region. Relocation assistance - available depending on role eligibility. Retirement savings plan - traditional 401(k), Roth, and after-tax (mega backdoor Roth) options.

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analyzing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will:

• Perform incoming inspection, in-process inspection and end of line inspection. Ensure Inspection areas follow processes and best practices associated with inspection work instructions, procedures, and tools.
• Collaborate with Quality Engineering in the creation of inspection plans for incoming materials, parts, and assemblies from suppliers and monitor their compliance
• Execute on the equipment calibration and material shelf-life verification programs
• Support Material review board processes
• Support internal and external audits on processes and procedures.
• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.

Requirements:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field
• 3+ years of Quality and/or Manufacturing experience within the Aerospace industry
• Experience with Calibrated equipment (calipers, micrometers, multimeters, oscilloscopes, network analyzers, CMM etc.)
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD)
• Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing
• Experience with inspection of machined parts and mechanical assemblies
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses)
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Ability to effectively communicate (verbal and written) with engineering and production.
• Ability to lift 25 lbs unassisted
• Understanding of FAIR, COC, production metrics
• Eligible to obtain and maintain an active U.S. Secret security clearance

Preferred Qualifications:

• Bachelor’s degree in Engineering or related field of study
• IPC-A-610 or IPC-A-620 Certification
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD)
• Experience with auditing processes and procedures in a manufacturing environment
• Detail oriented self starter with minimal oversight - strong ability to communicate with different cross functional teams.

Salary Range: $86,000-$114,000 USD

XML job scraping automation by YubHub

In this role, you will be responsible for supporting the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Key responsibilities:

• Perform incoming inspection, in-process inspection and end of line inspection.
• Support Material review board processes.
• Propose, develop and implement quality assurance policies and procedures and review with the product quality engineers.
• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.
• Support the calibration process.
• Support internal and external audits on processes and procedures.

Required qualifications:

• Experience with Calibrated equipment (calipers, micrometers, CMM etc.).
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD).
• Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing.
• Experience with inspection of machined parts and mechanical assemblies.
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses).
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard.
• Experience with communicating with suppliers and cross functional teams.
• Ability to lift 25 lbs unassisted.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred qualifications:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field.
• IPC-A-610 or IPC-A-620 Certification.
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD).
• Experience with auditing processes and procedures in a manufacturing environment.
• Highly motivated team player who is willing to support a fast paced team environment.
• Detail oriented self starter with minimal oversight.
• Strong ability to communicate with different cross functional teams.
• Knowledge of First Article Inspection requirements and processes.
• Experience with validation and testing assemblies and their components.
• Experience operating overhead crane and moving large assemblies.

XML job scraping automation by YubHub

Key responsibilities include:

• Managing the site Materials Review Board (MRB) process
• Inspecting to verify non-conforming parts at Reston Site and at Supplier Sites as assigned
• Partnering with Site Supplier Quality Engineering Organisation to support Supplier Quality Control
• Assisting in the root cause analysis
• Assisting in the dispositioning of non-conforming material and ensuring the tasks are completed in a timely manner
• Managing internal re-work to support dispositions
• Ensuring data collection and entry is accurate and complete for the MRB process
• Communicating the process performance and quality issues to key stakeholders to drive improvements
• Executing vendor return material authorisation (RMA) with partnership between Warehouse and Buyers to ensure material leaves the MRB area for suppliers
• Performing Verification of First Article Inspection (FAI) on incoming material and coordinating acceptance of FAI data submitted by suppliers
• Managing quality containment process for material, tooling, and inspection equipment that are involved in non-conformances impacting production capacity and capability
• Creating inspection plans for incoming material, in-process inspection steps, and end of line inspection, as per direction from product quality engineers. Execute inspection as needed
• Training technicians and inspectors to execute inspection plans and data capture in the process
• Proposing, developing and implementing quality assurance policies and procedures and reviewing with the product quality engineers
• Reviewing and proposing continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy
• Supporting the calibration process by conducting recalls, managing the calibration database, and logistics with third party calibration services, as per the direction of the product quality engineers
• Deep diving into data and traceability investigations to identify trends, oddities, inconsistencies, and variation that impacts the effectiveness of processes, procedures, and product quality
• Staying current with new inspection technologies and techniques and recommending improvements to the inspection process

Requirements include:

• Associate degree or equivalent in a related field, or equivalent experience
• 5+ years of experience in metrology inspection or quality role
• Experience with production support and quality management
• Proficiency with computer-aided design (CAD) software and inspection data management software
• Ability to work independently and as part of a team
• Attention to detail and strong organisational skills
• Experience with calibrated equipment (calipers, micrometers, CMM, Faro arm, OMM, etc.)
• Knowledge & understanding of dimensioning and tolerancing as per Geometric Dimensioning and Tolerancing (GD&T)
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD)
• Analyzing inspection results and providing feedback to production, manufacturing engineering, and quality engineering departments
• Experience using investigative equipment such as x-ray inspection, digital characterisation, material certificate of compliance, etc.
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard
• Experience with validation and testing assemblies and their components
• Experience with communicating with suppliers and cross-functional teams
• Currently possesses and is able to maintain an active U.S. Secret security clearance

Preferred qualifications include:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field
• ASQ Certified Quality Engineer, Quality Improvement Associate, or equivalent
• IPC-A-610 or IPC-A-620 Certification
• Knowledge of 6 sigma, TQM, TPS, Lean, Low Rate Production
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses)
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD)
• Experience with auditing processes and procedures in a manufacturing environment
• Detail-oriented self-starter with minimal oversight
• Strong ability to communicate with different cross-functional teams

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analyzing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will have the opportunity to work with a variety of technologies, including calibrated equipment, and develop your skills in geometric dimensioning and tolerancing.

If you are a detail-oriented individual with a passion for quality and a strong work ethic, we encourage you to apply for this exciting opportunity.

Key Responsibilities:

• Conduct incoming inspection, in-process inspection, and end-of-line inspection to ensure that products meet quality standards.

• Collaborate with Quality Engineering to create inspection plans for incoming materials, parts, and assemblies from suppliers and monitor their compliance.

• Execute equipment calibration and material shelf-life verification programs.

• Support Material Review Board processes.

• Support internal and external audits on processes and procedures.

• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.

Requirements:

• Technical or Associate's degree in a related quality/mechanical/aerospace engineering field.

• 3+ years of Quality and/or Manufacturing experience within the Aerospace industry.

• Experience with calibrated equipment, such as calipers, micrometers, multimeters, oscilloscopes, network analyzers, and CMM.

• Geometric Dimensioning and Tolerancing (GD&T) knowledge and understanding of dimension and tolerancing.

• Experience with inspection of machined parts and mechanical assemblies.

• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses).

• Experience in a facility with AS9100, ISO9001, IATF 16949, or similar QMS standard.

• Ability to rapidly change roles/responsibilities while working in a fast-paced, challenging work environment.

• Ability to effectively communicate (verbal and written) with engineering and production.

• Ability to lift 25 pounds unassisted.

• Understanding of FAIR, COC, production metrics.

• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred Qualifications:

• Bachelor's degree in Engineering or related field of study.

• IPC-A-610 or IPC-A-620 Certification.

• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD).

• Experience with auditing processes and procedures in a manufacturing environment.

• Detail-oriented self-starter with minimal oversight - strong ability to communicate with different cross-functional teams.

XML job scraping automation by YubHub

Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

The successful candidate will have experience with calibrated equipment, reading and interpreting engineering drawings, geometric dimensioning and tolerancing, and inspection of machined parts and mechanical assemblies.

The role will primarily operate during second shift hours between 1:00PM and 11:30PM, with a starting hourly rate of $28.00, plus a $2.00 differential for second shift work.

Anduril offers a comprehensive benefits package, including healthcare benefits, income protection, generous time off, family planning and parenting support, mental health resources, professional development, commuter benefits, relocation assistance, and a retirement savings plan.

XML job scraping automation by YubHub

The ideal candidate combines a strong engineering foundation with hands-on experience in mechanical and electronic assembly production.

Responsibilities

Process Innovation

Conceptualize, develop, and implement processes and improvements to new and existing products

Analyse production workflows and identify areas for improvement to reduce waste, cost, and downtime

Develop and document process parameters, SOPs, and quality control standards

Drone Production Support

Work closely with engineering and production teams to resolve issues related to electromechanical assemblies and validation, such as mechanical assemblies, CNC machined components, carbon fibre layup, Final assembly and unit testing

Facilitate day to day production support of drone production

Mentor and guide technicians and engineers to best engineering practices to meet AS9100D ISO9001 defense manufacturing requirements

Provide technical support during new product introduction (NPI) and engineering change implementations

Tooling & Equipment

Specify and design tools, jigs, and fixtures to streamline assembly and manufacturing

Manage procurement and validation of new equipment, including FAT and SAT

Cross-functional Collaboration

Collaborate with R&D, Product Design, Quality Assurance, and Supply Chain teams to ensure manufacturability and scalability

Participate in DFMA (Design for Manufacturing and Assembly) reviews during product development

Coordinate with vendors and contract manufacturers to ensure consistent production quality

Quality and Testing

Define and create in-process validation and testing processes

Lead root cause analysis and corrective action plans for final drone assembly and mechanical drone components

Ensure workplace safety and compliance with applicable standards and regulations (e.g., OSHA, ISO, RoHS)

Requirements

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Aerospace Engineering, or equivalent demonstrable experience
• A minimum of 2 years' of experience with electro-mechanical manufacturing and assembly in a high-quality industry like Aerospace
• Familiarity with final assembly of electro-mechanical assemblies such as motors, drone controllers, antenna assembly or similar
• Familiarity with lean manufacturing, Six Sigma, Kaizen, or other continuous improvement methodologies
• Proven analytical, troubleshooting, and project management skills
• Experienced presenter with demonstrated communication and documentation abilities
• Ability to work extended hours/weekends for mission critical deadlines

ITAR Regulations

To conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorizations from the U.S. Department of State.

Bonus Points

• Experience with drone/robotics manufacturing
• Strong CAD/CAM skills for tooling and fixture design
• Experience with aerospace production testing, validation and calibration calibration, thermal/vibration testing, or any other sort of validation/acceptance testing prior to shipping strongly preferred
• Experience commissioning new mechanical assemblies through mid volume production
• Knowledge of manufacturing processes such as injection molding, carbon fibre layup, SMT, PCB assemblies or CNC machining preferred
• Green Belt or Black Belt certification is a plus
• Working knowledge of AS9100D, NADCAP and ISO9001 requirements in defense manufacturing

What We Offer

• Competitive salary, stock options and benefits, including health, vision and dental
• 401K enrollment at 90 days
• Generous PTO + most Federal Holidays observed
• Collaborative and inclusive work environment
• Access to the latest tools and technologies
• High levels of responsibility and autonomy
• Professional growth and development opportunities
• Access to the hardest problems in electronic warfare

XML job scraping automation by YubHub

The ideal candidate combines a strong engineering foundation with hands-on experience in mechanical and electronic assembly production.

Key responsibilities include: Process Innovation - Conceptualize, develop, and implement processes and improvements to new and existing products. Analyse production workflows and identify areas for improvement to reduce waste, cost, and downtime. Develop and document process parameters, SOPs, and quality control standards.

Drone Production Support - Work closely with engineering and production teams to resolve issues related to electromechanical assemblies and validation, such as PCB Assemblies, cable assembly, Antenna assembly and unit testing. Facilitate day-to-day production support of drone production; mentor and guide technicians and engineers to best engineering practices to meet AS9100D ISO9001 defence manufacturing requirements. Provide technical support during new product introduction (NPI) and engineering change implementations.

Cross-functional Collaboration - Collaborate with R&D, Product Design, Quality Assurance, and Supply Chain teams to ensure manufacturability and scalability. Participate in DFMA (Design for Manufacturing and Assembly) reviews during product development. Coordinate with vendors and contract manufacturers to ensure consistent production quality.

Quality and Testing - Define and create in-process validation and testing processes. Lead root cause analysis and corrective action plans for electrical assemblies and drone components. Ensure workplace safety and compliance with applicable standards and regulations (e.g., OSHA, ISO, RoHS).

Required qualifications include: Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Electronics Engineering, Aerospace Engineering, or equivalent demonstrable experience. A minimum of 5 years of experience within avionics, drone, or an electronics integration in aerospace or similar high-quality industries. Familiarity with final assembly of PCBA and electro-mechanical assemblies such as motors, drone controllers or similar. Experience providing technical support during new product introduction (NPI) and engineering change implementations. Familiarity with lean manufacturing, Six Sigma, Kaizen, or other continuous improvement methodologies. Proven analytical, troubleshooting, and project management skills. Experienced presenter, demonstrating excellent communication and documentation abilities. Ability to work extended hours/weekends for mission-critical deadlines.

ITAR Regulations - To conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorisations from the U.S. Department of State.

Bonus points include experience with drone/robotics manufacturing, proficiency with PCB layout tools like Altium, experience with aerospace production testing, validation and calibration, thermal/vibration testing, or any other sort of validation/acceptance testing prior to shipping.

What we offer includes competitive salary, stock options and benefits, including health, vision and dental, 401K enrollment at 90 days, generous PTO + most Federal Holidays observed, collaborative and inclusive work environment, access to the latest tools and technologies, high levels of responsibility and autonomy, professional growth and development opportunities, and access to the hardest problems in electronic warfare.

XML job scraping automation by YubHub