The Quality Inspector will support the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Experience with Calibrated equipment (calipers, micrometers, CMM etc.) is required. Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD) is also required. Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing is necessary. Experience with inspection of machined parts and mechanical assemblies is required. Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses) is also required. Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard is necessary. Experience with validation and testing assemblies and their components is required. Experience with communicating with suppliers and cross functional teams is necessary. U.S. Person Status is required as this position needs to access controlled data.

Technical or Associates degree in related quality/mechanical/aerospace engineering field is preferred. 3+ years experience in a quality assurance or inspection role in a manufacturing/production setting is also preferred. IPC-A-610 or IPC-A-620 Certification is preferred. Basic knowledge using various measuring tools and hand tools (e.g. tape measure, caliper, micrometer, drivers etc.) is necessary. Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD) is preferred. Knowledge of First Article Inspection requirements and processes is necessary. Highly motivated team player who is willing to support a fast paced team environment is required. Detail oriented self starter with minimal oversight is necessary. Strong ability to communicate with different cross functional teams is required. Able to obtain and maintain an active U.S. Secret security clearance is necessary.

US Hourly Range $25-$33 USD. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits - US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. - UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. - IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits - Income Protection: Anduril covers life and disability insurance for all employees. - Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. - Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. - Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. - Professional Development: Annual reimbursement for professional development - Commuter Benefits: Company-funded commuter benefits based on your region. - Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan - US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. - UK & IE Roles: Pension plan with employer match. - AUS Roles: Superannuation plan.

XML job scraping automation by YubHub

The Quality team is responsible for a wide range of activities that are crucial to the manufacturing process including operating equipment, assembling products, performing quality control checks, and maintaining a safe and efficient work environment.

The Quality Inspector will support the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Required qualifications include experience with calibrated equipment, reading and interpreting engineering drawings, geometric dimensioning and tolerancing knowledge, and experience with inspection of machined parts and mechanical assemblies.

Preferred qualifications include technical or associates degree in a related quality/mechanical/aerospace engineering field, 3+ years experience in a quality assurance or inspection role in a manufacturing/production setting, and IPC-A-610 or IPC-A-620 certification.

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analysing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will perform incoming inspection, in-process inspection, and end-of-line inspection. You will also collaborate with Quality Engineering in the creation of inspection plans for incoming materials, parts, and assemblies from suppliers and monitor their compliance.

Additionally, you will execute on the equipment calibration and material shelf-life verification programs, support Material review board processes, and support internal and external audits on processes and procedures.

You will review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.

Required qualifications include a technical or associate's degree in a related quality/mechanical/aerospace engineering field, 3+ years of quality and/or manufacturing experience within the aerospace industry, and experience with calibrated equipment, geometric dimensioning and tolerancing, and inspection of machined parts and mechanical assemblies.

Preferred qualifications include a bachelor's degree in engineering or a related field of study, IPC-A-610 or IPC-A-620 certification, and experience with manufacturing processes and their related systems.

XML job scraping automation by YubHub

The Quality team works with our internal teams, customers, and suppliers to ensure the deployment of reliable products that meet all mission requirements. The Quality Inspector will support the Manufacturing/Production teams and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner.

Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, raise non-conformance tickets for triage, support product traceability, take corrective action, and implement standards/specifications/processes cross-functionally with Quality Teams.

Key responsibilities include:

Working in a modern manufacturing environment on incoming inspection, in-process inspection, and end-of-line inspection. Supporting Material Review Board processes. Proposing, developing, and implementing quality assurance policies and procedures and reviewing with product quality and manufacturing engineers. Reviewing and proposing continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy. Supporting the calibration process of test equipment, jigs, and fixtures. Coordinating calibration. Supporting internal and external audits on processes and procedures.

Requirements include:

Experience with calibrated equipment (calipers, micrometers, CMM, scanning, torque, multimeters, etc.). Experience reading and interpreting engineering drawings (wire diagrams, work instructions, MBD drawings). Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing. Experience with inspection of CNC machined parts, fabricated weldments, and mechanical assemblies. Experience with inspection of electrical and electronic components (PCBs, wire-harnesses). Experience in a facility with AS9100, ISO9001, or similar QMS standard. Experience with communicating in cross-functional teams and with suppliers as needed. Ability to obtain and maintain an Australian Government Security Clearance.

Preferred qualifications include:

Technical or Associate's degree in a related quality/mechanical/aerospace engineering field. IPC-A-610 or IPC-A-620 certification. Experience with manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD). Experience with auditing processes and procedures in a manufacturing environment. Detail-oriented self-starter with minimal oversight. Strong ability to communicate with different cross-functional teams. Knowledge of First Article Inspection requirements and processes. Knowledge of maritime vessel requirements. Experience with validation and testing assemblies and their components.

Salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education, and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full-time offers; and are considered part of Anduril's total compensation package.

Additional benefits include:

Healthcare benefits - comprehensive medical, dental, and vision plans at little to no cost to you. Income protection - Anduril covers life and disability insurance for all employees. Generous time off - highly competitive PTO plans with a holiday hiatus in December. Caregiver and wellness leave is available to care for family members, bond with a new baby, or address your own medical needs. Family planning and parenting support - coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental health resources - access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional development - annual reimbursement for professional development. Commuter benefits - company-funded commuter benefits based on your region. Relocation assistance - available depending on role eligibility. Retirement savings plan - traditional 401(k), Roth, and after-tax (mega backdoor Roth) options.

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analyzing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will:

• Perform incoming inspection, in-process inspection and end of line inspection. Ensure Inspection areas follow processes and best practices associated with inspection work instructions, procedures, and tools.
• Collaborate with Quality Engineering in the creation of inspection plans for incoming materials, parts, and assemblies from suppliers and monitor their compliance
• Execute on the equipment calibration and material shelf-life verification programs
• Support Material review board processes
• Support internal and external audits on processes and procedures.
• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.

Requirements:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field
• 3+ years of Quality and/or Manufacturing experience within the Aerospace industry
• Experience with Calibrated equipment (calipers, micrometers, multimeters, oscilloscopes, network analyzers, CMM etc.)
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD)
• Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing
• Experience with inspection of machined parts and mechanical assemblies
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses)
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Ability to effectively communicate (verbal and written) with engineering and production.
• Ability to lift 25 lbs unassisted
• Understanding of FAIR, COC, production metrics
• Eligible to obtain and maintain an active U.S. Secret security clearance

Preferred Qualifications:

• Bachelor’s degree in Engineering or related field of study
• IPC-A-610 or IPC-A-620 Certification
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD)
• Experience with auditing processes and procedures in a manufacturing environment
• Detail oriented self starter with minimal oversight - strong ability to communicate with different cross functional teams.

Salary Range: $86,000-$114,000 USD

XML job scraping automation by YubHub

Lead and mentor a team of quality inspectors, ensuring the consistent delivery of quality performance for various product lines. Train team members on work instructions, procedures, and hands-on inspection techniques, maintaining accurate training records. Develop and maintain quality control standards, ensuring their consistent application through effective staff training. Author and update standard operating procedures (SOPs) related to inspection and quality control processes. Drive through ambiguities and uncertainties in inspection methods, inspection order execution, and planning to provide inspectors with tactical guidance and direction for execution. Collect and statistically analyse data to inform decision-making and identify areas for improvement. Manage and align resources to support various inspection operations, including Incoming/Receiving Material Inspection, In-process inspection, End-of-line Inspection, material containment/ad-hoc inspections. Continuously monitor processes to identify opportunities for enhancement and efficiency gains. Collaborate with cross-functional leaders and departments to ensure timely product delivery while maintaining quality standards. Ensure all inspection areas adhere to established processes, best practices, and utilise appropriate work instructions, procedures, and tools. Partner with Quality Engineering to contribute to Quality roadmap initiatives. Provide readiness for internal auditing and compliance reviews.

Required Qualifications:

• 5+ years of progressive Quality and/or Regulatory experience within the Aerospace, Defence, or Automotive industries.
• 3+ years of experience in a Management or supervisory role.
• Strong understanding of Quality Management Systems & AS9100 requirements.
• Prior exposure to the manufacture of electronic components for Aerospace applications.
• Strong attention to detail, observation, organisational, and leadership skills.
• In-depth knowledge of Quality Improvement and Lean Manufacturing methodologies.
• Excellent organisational, problem-solving, and analytical skills.
• Excellent communication and interpersonal skills.
• Strong leadership and decision-making abilities in a production environment.
• U.S. Person Status is required as this position needs to access controlled data.

Preferred Qualifications:

• Technical degree in a related quality/mechanical/aerospace engineering field.
• ASQ Certified Quality Engineer, Quality Improvement Associate, or equivalent.
• IPC-A-610 or IPC-A-620 Certification.
• Knowledge of 6 Sigma, TQM, TPS, Lean, and Low Rate Production methodologies.
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses).
• Experience with data systems, QMS software, automated data collection tools, and generating reports, data visualisation, and data queries.
• Experience in drafting and revising standard operating procedures and quality troubleshooting guides for inspection and quality control processes.
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD).
• Experience with auditing processes and procedures in a manufacturing environment.
• Experience with validation and testing sub-assemblies and components.
• Experience with selecting, buying, qualifying, and implementing inspection equipment.
• Experience working with suppliers along with Sourcing and Supplier Quality Engineering teams.
• Detail-oriented self-starter with the ability to work with minimal oversight and communicate effectively with cross-functional teams.
• Proficiency with computer-aided design (CAD) software and inspection data management software.

Travel:

• 50% travel required to local manufacturing sites and HQ in Orange County
• 5% travel to other Anduril sites out of state.

Physical Demands and Working Conditions:

• Ability to lift up to 35 pounds
• Work in clean room environments
• Use of precision optical tools and equipment
• Visual acuity and colour discrimination required for inspection
• Adherence to laser safety and contamination control protocols

Salary Range: $86,000-$114,000 USD

XML job scraping automation by YubHub

In this role, you will be responsible for supporting the Manufacturing/Production teams, and be responsible for learning and executing detailed inspection processes necessary to ensure a quality product in a timely manner. Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

Key responsibilities:

• Perform incoming inspection, in-process inspection and end of line inspection.
• Support Material review board processes.
• Propose, develop and implement quality assurance policies and procedures and review with the product quality engineers.
• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.
• Support the calibration process.
• Support internal and external audits on processes and procedures.

Required qualifications:

• Experience with Calibrated equipment (calipers, micrometers, CMM etc.).
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD).
• Geometric Dimensioning and Tolerancing (GD&T) knowledge, understanding dimension and tolerancing.
• Experience with inspection of machined parts and mechanical assemblies.
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses).
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard.
• Experience with communicating with suppliers and cross functional teams.
• Ability to lift 25 lbs unassisted.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred qualifications:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field.
• IPC-A-610 or IPC-A-620 Certification.
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD).
• Experience with auditing processes and procedures in a manufacturing environment.
• Highly motivated team player who is willing to support a fast paced team environment.
• Detail oriented self starter with minimal oversight.
• Strong ability to communicate with different cross functional teams.
• Knowledge of First Article Inspection requirements and processes.
• Experience with validation and testing assemblies and their components.
• Experience operating overhead crane and moving large assemblies.

XML job scraping automation by YubHub

We are seeking a Manufacturing Engineer with a Mechanical/Mechatronic Engineering background to join our team in Sydney, Australia.

As a Manufacturing Engineer, you will leverage deep technical expertise to solve complex manufacturing challenges, drive technology insertion, and ensure the manufacturability of next-generation products from the earliest stages of design.

Key Responsibilities:

• Provide expert Design for Manufacturability (DFM) and Design for Assembly (DFA) feedback, influencing designs to ensure they are compatible with capable and cost-effective manufacturing processes.

• Analyze engineering drawings, material selections, and tolerance stacks to identify and mitigate manufacturing risks early in the product lifecycle.

• Investigate and resolve production line-down situations, assembly problems, process deviations, and tooling issues to minimize downtime and maintain schedule.

• Provide clear and concise interpretation of engineering drawings, specifications, and work instructions to the production team.

• Develop, maintain, and continuously improve detailed manufacturing work instructions, assembly guides, and Standard Operating Procedures (SOPs) to ensure clarity, repeatability, and quality.

• Manage these requirements within Anduril’s MES.

• Serve as the technical lead for investigating complex or systemic production issues, conducting deep-dive Root Cause Analysis (RCA) to identify fundamental process flaws.

• Develop novel tooling solutions for fabrication and assembly of structural parts.

• Assess the process impact of Engineering Change Notices (ECNs) and define the necessary requalification and validation activities.

• Provide support to Supply Chain in the technical qualification and development of critical suppliers, assessing their process capabilities to meet demanding engineering requirements.

• Collaborate on the design and optimization of workstation and production line layouts to enhance ergonomics, safety, and efficiency.

• Foster a collaborative environment that encourages knowledge sharing and team engagement.

Requirements:

• 5+ years of hands-on experience in a manufacturing environment (e.g., aerospace, defense, medical device, complex electronics).

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field.

• Proven ability to troubleshoot technical manufacturing issues and lead root cause analysis.

• Experience with Lean Manufacturing and continuous improvement methodologies.

• Demonstrated experience reading and interpreting complex engineering drawings, schematics, and specifications, including a strong understanding of GD&T (Geometric Dimensioning and Tolerancing).

• Excellent communication and interpersonal skills, with the ability to work effectively with operators, technicians, and senior management.

• Prior knowledge and interaction with a Manufacturing Execution System (MES) for production operations

• Prior knowledge of Oracle (ERP), Teamcenter (PLM) or similar systems.

• Ability to obtain and maintain an Australian Government Security Clearance (NV2).

Preferred Qualifications:

• Production line design and set up including Value Stream Mapping, material flow, workstation and tooling design.

• Experience with work instruction authoring and MBOM configuration.

• Experience with CAD software (NX, Solidworks, Siemens/Teamcenter)

Salary Range: An estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

Required Skills:

• Design for Manufacturability (DFM)

• Design for Assembly (DFA)

• Root Cause Analysis (RCA)

• Lean Manufacturing

• Continuous Improvement

• Geometric Dimensioning and Tolerancing (GD&T)

• Manufacturing Execution System (MES)

• Oracle (ERP), Teamcenter (PLM) or similar systems

Preferred Skills:

• Production line design and set up

• Work instruction authoring and MBOM configuration

• CAD software (NX, Solidworks, Siemens/Teamcenter)

XML job scraping automation by YubHub

Key responsibilities include:

• Supporting the VP of Quality in evolving priorities and organizational needs, adapting capacity and focus as required
• Enabling Quality team leaders and division members to maximize efficiency and quality output through coaching and resource alignment
• Building internal delivery rhythms, KPIs, and OKRs that drive team alignment, execution fidelity, and risk management
• Leading cross-team initiatives requiring executive sponsorship and accountability, acting as go-to problem solver for ambiguous challenges
• Partnering with Quality Systems Engineering to deploy and track KPIs through scorecards to inform decisions at QBR, MDPR
• Fostering cross-functional relationships, embedding quality and compliance fluency throughout partner functions
• Providing strategic oversight and ensuring product line governance in accordance with DCMA compliance and federal mandates
• Serving as the connective tissue across the organization,coordinating, communicating, and facilitating
• Owning Product Quality Engineering strategy across all new product development by appropriately leveraging the following functions at the appropriate phase gates: Reliability, System Safety, Supplier Quality, and Quality Systems Engineering
• Owning day-to-day factory quality engineering and sustainment; owns Productization/Recovery execution (productionization, stabilization, ramp support)
• Ensuring efforts to embed Quality at the source are executed and implemented by operationalizing findings from Design for Quality, DFM, and FSS risk management methodologies
• Developing and executing mitigation strategies identified through root cause analysis, FMEA, and trend analysis; translating findings into design improvements and process enhancements
• Driving DFMEA and PFMEA activities, coaching teams to proactively identify and mitigate risks before they materialize
• Establishing product validation and verification protocols (DV, PV, reliability testing) aligned with industry best practices
• Driving design review governance, supporting critical phase-gate reviews to ensure quality criteria are satisfied at each milestone
• Partnering with R&D, Engineering, Manufacturing, and Supply Chain to create closed-loop corrective action systems that feed learnings into next-gen designs
• Building and leading a high-performing Product Quality Engineering team with expertise in statistical methods, DOE, MSA, and process capability
• Establishing a center of excellence for statistical analysis, providing tools, templates, mentorship, and governance for data-driven decision-making
• Leading capability maturity assessments for product development processes, implementing improvement roadmaps
• Serving as Quality voice in PDP governance, aligning product strategy, customer expectations, regulatory requirements, and manufacturing capabilities
• Partnering with Supplier Quality to ensure early establishment of supplier quality engagement protocols, co-developing quality agreements and performance metrics
• Driving Voice of the Customer integration into product requirements and quality standards
• Leading production readiness assessments, validating process capability, tooling, training, and quality systems
• Owning product quality scorecards tracking first-pass yield, defect rates, warranty returns, and field reliability
• Facilitating post-launch reviews to capture lessons learned and feed insights into the Product Development playbook

XML job scraping automation by YubHub

Key responsibilities include:

• Managing the site Materials Review Board (MRB) process
• Inspecting to verify non-conforming parts at Reston Site and at Supplier Sites as assigned
• Partnering with Site Supplier Quality Engineering Organisation to support Supplier Quality Control
• Assisting in the root cause analysis
• Assisting in the dispositioning of non-conforming material and ensuring the tasks are completed in a timely manner
• Managing internal re-work to support dispositions
• Ensuring data collection and entry is accurate and complete for the MRB process
• Communicating the process performance and quality issues to key stakeholders to drive improvements
• Executing vendor return material authorisation (RMA) with partnership between Warehouse and Buyers to ensure material leaves the MRB area for suppliers
• Performing Verification of First Article Inspection (FAI) on incoming material and coordinating acceptance of FAI data submitted by suppliers
• Managing quality containment process for material, tooling, and inspection equipment that are involved in non-conformances impacting production capacity and capability
• Creating inspection plans for incoming material, in-process inspection steps, and end of line inspection, as per direction from product quality engineers. Execute inspection as needed
• Training technicians and inspectors to execute inspection plans and data capture in the process
• Proposing, developing and implementing quality assurance policies and procedures and reviewing with the product quality engineers
• Reviewing and proposing continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy
• Supporting the calibration process by conducting recalls, managing the calibration database, and logistics with third party calibration services, as per the direction of the product quality engineers
• Deep diving into data and traceability investigations to identify trends, oddities, inconsistencies, and variation that impacts the effectiveness of processes, procedures, and product quality
• Staying current with new inspection technologies and techniques and recommending improvements to the inspection process

Requirements include:

• Associate degree or equivalent in a related field, or equivalent experience
• 5+ years of experience in metrology inspection or quality role
• Experience with production support and quality management
• Proficiency with computer-aided design (CAD) software and inspection data management software
• Ability to work independently and as part of a team
• Attention to detail and strong organisational skills
• Experience with calibrated equipment (calipers, micrometers, CMM, Faro arm, OMM, etc.)
• Knowledge & understanding of dimensioning and tolerancing as per Geometric Dimensioning and Tolerancing (GD&T)
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD)
• Analyzing inspection results and providing feedback to production, manufacturing engineering, and quality engineering departments
• Experience using investigative equipment such as x-ray inspection, digital characterisation, material certificate of compliance, etc.
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard
• Experience with validation and testing assemblies and their components
• Experience with communicating with suppliers and cross-functional teams
• Currently possesses and is able to maintain an active U.S. Secret security clearance

Preferred qualifications include:

• Technical or Associates degree in related quality/mechanical/aerospace engineering field
• ASQ Certified Quality Engineer, Quality Improvement Associate, or equivalent
• IPC-A-610 or IPC-A-620 Certification
• Knowledge of 6 sigma, TQM, TPS, Lean, Low Rate Production
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses)
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD)
• Experience with auditing processes and procedures in a manufacturing environment
• Detail-oriented self-starter with minimal oversight
• Strong ability to communicate with different cross-functional teams

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analysing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will work closely with our Quality Engineering team to identify, analyse, and resolve quality issues. You will also support internal and external audits on processes and procedures.

To be successful in this role, you will need to have a technical or associate's degree in a related quality/mechanical/aerospace engineering field, as well as 3+ years of quality and/or manufacturing experience within the aerospace industry.

You will also need to have experience with calibrated equipment, geometric dimensioning and tolerancing (GD&T), and inspection of machined parts and mechanical assemblies.

If you are a detail-oriented individual with excellent communication skills and a passion for quality, we encourage you to apply for this exciting opportunity.

As a Quality Inspector at Anduril, you will have the opportunity to work on a variety of projects, including the development of new products and processes, and the implementation of quality control measures.

You will also have the chance to collaborate with a talented team of engineers and technicians, and to contribute to the growth and success of our company.

In addition to your technical skills and experience, you will need to have excellent communication and interpersonal skills, as well as the ability to work effectively in a team environment.

If you are a motivated and detail-oriented individual who is passionate about quality, we encourage you to apply for this exciting opportunity.

Responsibilities:

• Conduct inspections to ensure that products meet quality standards

• Analyse data to identify trends and areas for improvement

• Collaborate with cross-functional teams to implement effective quality assurance protocols

• Support internal and external audits on processes and procedures

• Develop and implement quality control measures

• Collaborate with the Quality Engineering team to identify, analyse, and resolve quality issues

Requirements:

• Technical or associate's degree in a related quality/mechanical/aerospace engineering field

• 3+ years of quality and/or manufacturing experience within the aerospace industry

• Experience with calibrated equipment

• Geometric dimensioning and tolerancing (GD&T) knowledge

• Inspection of machined parts and mechanical assemblies

• Excellent communication and interpersonal skills

• Ability to work effectively in a team environment

Preferred Qualifications:

• Bachelor's degree in engineering or a related field

• IPC-A-610 or IPC-A-620 certification

• Experience with manufacturing processes and their related systems

• Experience with auditing processes and procedures in a manufacturing environment

Salary Range: $86,000 - $114,000 USD

Benefits:

• Comprehensive medical, dental, and vision plans

• Generous time off

• Family planning and parenting support

• Mental health resources

• Professional development opportunities

• Commuter benefits

• Relocation assistance

• Retirement savings plan

XML job scraping automation by YubHub

Your responsibilities will include conducting inspections, analyzing data, and collaborating with cross-functional teams to implement effective quality assurance protocols.

In this role, you will have the opportunity to work with a variety of technologies, including calibrated equipment, and develop your skills in geometric dimensioning and tolerancing.

If you are a detail-oriented individual with a passion for quality and a strong work ethic, we encourage you to apply for this exciting opportunity.

Key Responsibilities:

• Conduct incoming inspection, in-process inspection, and end-of-line inspection to ensure that products meet quality standards.

• Collaborate with Quality Engineering to create inspection plans for incoming materials, parts, and assemblies from suppliers and monitor their compliance.

• Execute equipment calibration and material shelf-life verification programs.

• Support Material Review Board processes.

• Support internal and external audits on processes and procedures.

• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.

Requirements:

• Technical or Associate's degree in a related quality/mechanical/aerospace engineering field.

• 3+ years of Quality and/or Manufacturing experience within the Aerospace industry.

• Experience with calibrated equipment, such as calipers, micrometers, multimeters, oscilloscopes, network analyzers, and CMM.

• Geometric Dimensioning and Tolerancing (GD&T) knowledge and understanding of dimension and tolerancing.

• Experience with inspection of machined parts and mechanical assemblies.

• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses).

• Experience in a facility with AS9100, ISO9001, IATF 16949, or similar QMS standard.

• Ability to rapidly change roles/responsibilities while working in a fast-paced, challenging work environment.

• Ability to effectively communicate (verbal and written) with engineering and production.

• Ability to lift 25 pounds unassisted.

• Understanding of FAIR, COC, production metrics.

• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred Qualifications:

• Bachelor's degree in Engineering or related field of study.

• IPC-A-610 or IPC-A-620 Certification.

• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD).

• Experience with auditing processes and procedures in a manufacturing environment.

• Detail-oriented self-starter with minimal oversight - strong ability to communicate with different cross-functional teams.

XML job scraping automation by YubHub

Some of the daily duties will include inspecting incoming materials, equipment, and products to ensure quality specifications are met. Additionally, you'll investigate/troubleshoot product and production issues, take corrective action as well as implement standards/specifications/processes cross-functionally with Quality Teams.

The successful candidate will have experience with calibrated equipment, reading and interpreting engineering drawings, geometric dimensioning and tolerancing, and inspection of machined parts and mechanical assemblies.

The role will primarily operate during second shift hours between 1:00PM and 11:30PM, with a starting hourly rate of $28.00, plus a $2.00 differential for second shift work.

Anduril offers a comprehensive benefits package, including healthcare benefits, income protection, generous time off, family planning and parenting support, mental health resources, professional development, commuter benefits, relocation assistance, and a retirement savings plan.

XML job scraping automation by YubHub

The right person for this role has a strong command of mechanical design and stress and thermal analysis principles as well as a solid handle on the usage of tools common in industry. If you are someone who is hardware-focused and detail-oriented then this role is for you.

Responsibilities:

• Perform CAD design activities of mechanical components.
• Perform finite element analysis of structural and thermal systems.
• Generate, review, and release product definition (i.e. engineering drawings).
• Create reports and presentations documenting analysis and other supporting work.
• Present to peers and customers in design reviews.
• Support prototyping, manufacturing, and test operations onsite at our manufacturing facilities and suppliers’ facilities.
• Own the development of critical subsystems from cradle to grave.

Required Qualifications:

• 2+ years’ experience performing mechanical design and analysis.
• A bachelor’s degree in mechanical engineering, aerospace engineering, or similar.
• Prior experience operating CAD software and/or FEA software.
• A solid understanding of hardware manufacturability and Geometric Dimensioning and Tolerancing.
• Strong communication skills.
• Ability to travel to other Anduril sites, customer sites, or supplier sites as business demand dictates. Anticipated 10-25% travel.
• Ability to obtain and hold a Secret Security Clearance.

Preferred Qualifications:

• Exhibits strong initiative and ownership of tasks.
• Experience with NX CAD software and/or Abaqus FEA software.
• Certification in Geometric Dimensioning and Tolerancing.
• Expertise in engineering tool development in Microsoft Excel, MATLAB, and/or Python.
• Experience with propulsion systems.

US Salary Range $85,000-$126,000 USD

XML job scraping automation by YubHub

You will work with responsible engineers who are designing → building → and delivering complex customer programs.

The ideal candidate will leverage their experience to deliver highly complex, optimized, multi-disciplinary products and programs.

If you are someone who loves to build world-class quality processes with suppliers, work hands-on with engineering, and be accountable for results, then this role is for you.

This role will support our 2nd shift teams and expected to work 3PM-11:30PM.

Responsibilities:

• Willingness to engagement with product development Teams to achieve quality expectations for AIS products

• Drive product development to achieve quality experience for AIS products by implementing product engineering activities like process development, verification, validation, and qualification of processes, parts and sub-assemblies.

• Drive clarity & resolution for development ambiguities associated with product maturity, process stability, and field performance that impact the product meeting it’s quality & reliability goals for volume production.

• Champion the transition from new product introduction (NPI) to a sustainable & predictable, high rate manufacturing process and supply chain.

• Own the elimination of product risk to improve reliability across the product lifecycle.

Engage in quality activities from concept through development and manufacturing to field use.

• Ensure the execution of product and process requirements.

Assist in Defining and improving such requirements.

• Work cross-functionally to define and execute the product roadmap.

• Lead Root Cause and Corrective Action (RCCA) and Material Review Board (MRB) activities.

Review the effectiveness of actions and share lessons learned across the product team.

• Lead product health data analysis and improvement activities.

Establish metrics for measuring quality and the factors that predict quality performance.

• Support the continuous improvement of the Quality Management System.

Define and improve required documentation and activities.

• Support investigations, initiatives, and projects as needed, at the team or organization level.

• Own the identification and elimination of product quality risk to improve reliability across the product lifecycle.

Support the quality planning from production concept/customer requirements through development and manufacturing to field use.

• Ensure the execution of product and process requirements to meet quality performance targets.

Define and improve such requirements.

Partner with production to ensure incoming material inspection, process control plans, and end of line test capture the essential quality requirements for successful customer shipments.

• Open to travel between HQ (CA) and Ohio based on program needs.

Required Qualifications:

• Bachelor’s degree in Engineering or similar technical field

• Experience in Engineering, Manufacturing, or Quality in aerospace/defense or similar hardware.

• Working knowledge of design review and quality management of precision mechanical parts & sub-assemblies, PCBA, harnessing, avionics, systems integration, composites, propulsion systems, and lethality systems.

• Experience driving product quality and performance requirements to test and measurement system development and optimization.

Leading the transition from engineering qualification to manufacturing variance testing for product quality coverage.

• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Measurement Systems Analysis (MSA), and Geometric Dimensioning and Tolerancing (GD&T).

• Working knowledge of mechanical and/or electrical manufacturing processes.

• Application of industry standards and best practices to meet government customer quality expectations.

• A strong ownership mindset with demonstrated capability to drive projects from start to completion.

• Analytical skills and experiences for data mining, data quality, metrics generation, issue management systems, and statistical analysis tools (MatLab, JMP, Minitab, etc.)

• Currently possesses and is able to maintain an active U.S. Secret security clearance.

Preferred Qualifications:

• Master’s degree in a technical field

• 5-7 years of experience with developing quality systems for high volume, high complex manufacturing environments and suppliers.

• Experience in Engineering, Manufacturing, or Quality in for communications systems used for Intelligence Community (IC) customers

• Working knowledge of AS9100/ ISO 9001-based Quality Management System requirements.

• Experience with IPC standards

• Experience with government contracts and mil standard requirements

• Experience with Teamcenter, SolidWorks, Jira, Tableau, and Altium (or other PCBA and harness design software)

XML job scraping automation by YubHub

This role involves designing, building, and testing complex mechanical structures and fluid systems that support full-scale and sub-scale vessel test campaigns in dynamic, real-world environments.

Responsibilities:

• Develop and execute test stand concepts, fabrication drawings, wiring schematics, and instrumentation lists tailored to maritime platforms
• Design, analyze, and validate structural systems, fluid systems, and dynamic mechanisms for ASV subsystems
• Supervise the build, integration, and commissioning of structural test setups, including mechanical fabrication and instrumentation
• Lead and execute rigorous mechanical and structural testing of marine components and systems, often in outdoor, field-based conditions
• Collaborate with naval architects, autonomy engineers, and control systems teams to ensure test fidelity and relevance to mission performance
• Maintain meticulous records of test data, design changes, and test reports to support traceability for DoD certification and reporting

Qualifications:

• Bachelor’s degree or greater in Mechanical Engineering, Structural Engineering or a related discipline
• 2+ years of experience designing and operating structural test equipment
• Hands-on design, analysis, and testing of mechanical structures or systems
• Professional experience with structural FEA or mechanical testing
• Proficiency with 3D CAD software (Siemens NX/Unigraphics preferred)
• Experience with: Geometric Dimensioning and Tolerancing (GD&T), Finite Element Analysis tools (ANSYS, NASTRAN, or equivalent), Design of large steel or aluminum weldments, High-pressure fluid system design, Mechanical assembly and fabrication techniques

Physical Demands:

• Prolonged periods of sitting at a desk and working on a computer
• Occasional standing and walking within the office
• Manual dexterity to operate a computer keyboard, mouse, and other office equipment
• Visual acuity to read screens, documents, and reports
• Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies
• Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Saronic pays 100% of the premium for employees and 80% for dependents
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium under the basic plan for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan with company match
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Pet Insurance: Discounted pet insurance options including 24/7 Telehealth helpline
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

XML job scraping automation by YubHub