As a Thermal Engineer at Shield AI, you will:

• Own thermal analysis and design efforts for unmanned aerial vehicle avionics, including custom power electronics
• Develop and validate analytical, numerical, and computational models for heat transfer and fluid flow using hand calculations and CFD tools such as FloEFD
• Provide input to trade studies, system architecture decisions, and risk assessments
• Assist cross-functional teams designing power electronic circuits and environmental enclosures
• Contribute to design requirements that impact circuit part selection, board layout, material selection, and other design aspects
• Drive test planning, instrumentation, and data analysis to correlate models with experimental results
• Communicate technical findings clearly through executive-level briefings, design reviews, and written reports

Required qualifications:

• B.S. in Mechanical Engineering, Aerospace Engineering, or related discipline
• Internship or engineering club experience in avionics or electronics thermal engineering
• Knowledge of heat transfer (conduction, convection, radiation) and fluid mechanics
• Familiarity with thermal analysis and CFD tools (e.g., ANSYS Icepak, FloEFD, STAR-CCM+)
• Experience with CAD design tools such as NX, SolidWorks, or similar
• Demonstrated experience applying first-principles reasoning to engineering problems
• Strong written and verbal communication skills, with a track record of leading technical discussions and presenting to stakeholders

Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location.

XML job scraping automation by YubHub

As a Staff Thermal Engineer, you will contribute to thermal analysis and design efforts for unmanned aerial vehicle avionics and thermal/fluid systems. You will develop and validate analytical, numerical, and computational models for heat transfer and fluid flow using hand calculations and CFD tools such as FloEFD. You will drive test planning, instrumentation, and data analysis to correlate models with experimental results.

Key responsibilities include:

• Contributing to thermal analysis and design efforts for unmanned aerial vehicle avionics and thermal/fluid systems
• Developing and validating analytical, numerical, and computational models for heat transfer and fluid flow using hand calculations and CFD tools such as FloEFD
• Driving test planning, instrumentation, and data analysis to correlate models with experimental results
• Communicating technical findings clearly through executive-level briefings, design reviews, and written reports

Requirements include:

• B.S. in Mechanical Engineering, Aerospace Engineering, or related discipline
• Minimum 7 years of professional experience in avionics or electronics thermal engineering
• Strong expertise in heat transfer (conduction, convection, radiation) and fluid mechanics
• Deep understanding of active and passive cooling solutions and their integration at component and system level
• Proficiency with thermal analysis and CFD tools (e.g., ANSYS Icepak, FloEFD, STAR-CCM+)
• Proficiency with CAD design tools such as NX, SolidWorks, or similar
• Demonstrated experience applying first-principles reasoning to complex engineering problems
• Strong written and verbal communication skills, with a track record of leading technical discussions and presenting to stakeholders

Preferred qualifications include:

• M.S. or Ph.D. in a relevant engineering discipline
• Experience with high-altitude aircraft avionics cooling and thermal design
• Familiarity with aircraft integration constraints (power, weight, volume, maintainability, safety)
• Hands-on experience with thermal and fluid system testing, instrumentation, and validation
• Knowledge of materials and manufacturing methods relevant to thermal management (pumps, heat exchangers, composites, etc.)
• Experience guiding trade studies, proposals, and customer interactions in aerospace or defense programs
• Background in multi-disciplinary system integration, spanning avionics, fluid systems, and systems engineering

Salary: $136,730 - $205,096 a year

Benefits: Pay within range listed + Bonus + Benefits + Equity

Note: Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location.

XML job scraping automation by YubHub

This role is best suited for an engineer who thrives on first-principles problem solving, is comfortable with ambiguous, open-ended challenges, and can bridge technical disciplines with strong communication and collaboration skills and the ability to simplify and communicate complex problems.

The engineer will be a key contributor in shaping designs, mentoring peers, and ensuring robust thermal solutions that meet mission-critical aerospace requirements.

Responsibilities:

• Own thermal analysis and design efforts for unmanned aerial vehicle avionics including custom power electronics
• Develop and validate analytical, numerical, and computational models for heat transfer and fluid flow using hand calculations and CFD tools such as FloEFD
• Provide technical leadership in trade studies, system architecture decisions, and risk assessments
• Lead cross-functional teams designing power electronic circuits and environmental enclosures. Provide design requirements that impact circuit part selection, board layout, material selection, and other design aspects
• Drive test planning, instrumentation, and data analysis to correlate models with experimental results
• Mentor junior engineers and guide cross-disciplinary teams in applying thermal/fluid fundamentals
• Communicate technical findings clearly through executive-level briefings, design reviews, and written reports
• Proactively identify risks, propose solutions, and influence electrical and/or PCBA design direction

XML job scraping automation by YubHub

You'll tackle high-impact challenges: enabling efficient long-endurance flight, optimizing aircraft center of gravity, and developing robust, certifiable systems that perform flawlessly in extreme conditions.

On-site or hybrid work is preferred; however, for highly qualified candidates, a remote arrangement may be considered with up to 25% travel.

Responsibilities:

• Architect end-to-end fuel systems including storage, transfer, venting, and pressurization for next-gen autonomous aircraft.
• Lead cross-functional integration between propulsion, structures, avionics, and thermal teams to ensure optimal system performance.
• Conduct system-level modeling and analysis to predict flow behavior, vapor suppression, slosh dynamics, and thermal effects.
• Define performance requirements and verification strategies for high-reliability components and assemblies.
• Lead design reviews, technical trade studies, and risk assessments for critical systems.
• Oversee supplier selection, qualification, and acceptance testing for pumps, valves, tanks, and sensors.
• Support and guide ground and flight test campaigns; perform root-cause analysis for system anomalies.
• Mentor engineers, establish best practices, and develop processes for system integration and testing.
• Contribute to long-term technology roadmaps, including hybrid-electric and alternative fuel system architectures.

Qualifications:

• B.S. or M.S. in Aerospace, Mechanical, or related engineering discipline.
• 12–15+ years of experience in aircraft fuel systems, aerospace fluids, or propulsion integration.
• Demonstrated expertise with fuel system design, analysis, and certification for manned or unmanned aircraft.
• Deep understanding of fluid mechanics, thermodynamics, and CFD principles.
• Proficiency with analysis and modeling tools (ANSYS Fluent, OpenFOAM, MATLAB/Simulink) and CAD software (NX, CATIA, or SolidWorks).
• Strong technical leadership and mentoring experience within multidisciplinary teams.
• Familiarity with FAA and MIL-STD certification requirements and validation testing.
• U.S. Citizenship required.
• For remote candidates - ability to travel up to 25%.

Salary:

$209,197 - $313,795 a year

XML job scraping automation by YubHub

As the Principal Aircraft Thermal Engineer, you will lead thermal analysis and characterization efforts for unmanned aerial vehicle aircraft-level thermal systems. You will architect and validate analytical, numerical, and computational models for heat transfer and fluid flow using hand calculations, finite difference methods, and CFD tools such as FloEFD.

You will provide leadership in trade studies, system architecture decisions, requirements generation, and technical risk assessments. You will define and oversee test planning, instrumentation, and data analysis to correlate models with experimental results.

You will mentor and guide cross-disciplinary teams in applying thermal/fluid fundamentals. You will communicate technical findings through executive-level briefings, design reviews, and technical reports.

Key responsibilities include:

• Leading thermal analysis and characterization efforts for unmanned aerial vehicle aircraft-level thermal systems
• Architecting and validating analytical, numerical, and computational models for heat transfer and fluid flow
• Providing leadership in trade studies, system architecture decisions, requirements generation, and technical risk assessments
• Defining and overseeing test planning, instrumentation, and data analysis
• Mentoring and guiding cross-disciplinary teams
• Communicating technical findings through executive-level briefings, design reviews, and technical reports

Requirements include:

• B.S. in Mechanical Engineering, Aerospace Engineering, or related discipline
• Minimum 12 years of professional experience in avionics or electronics thermal engineering
• Deep expertise in heat transfer (conduction, convection, radiation) and fluid mechanics
• Advanced understanding of active and passive cooling solutions and their integration at the component and system level
• Proficiency with thermal analysis and CFD tools (e.g., FloEFD, STAR-CCM+)
• Proficiency with CAD design tools such as NX, SolidWorks, or similar
• Demonstrated ability to apply first-principles reasoning to complex engineering problems
• Ability to learn new and cutting-edge materials knowledge and thermal management techniques from a variety of sources (technical papers, text books, etc.) and apply it to the development of advanced thermal management design
• Strong communication and leadership skills, with experience presenting to executives and customers

Preferred qualifications include:

• M.S. or Ph.D. in a relevant engineering discipline
• Extensive experience with high-altitude aircraft thermal management, analysis, and design
• Familiarity with aircraft integration constraints (power, weight, volume, maintainability, safety)
• Hands-on experience with thermal and fluid system testing, instrumentation, and validation
• Knowledge of materials and manufacturing methods relevant to aerospace thermal management
• Experience guiding trade studies, proposals, and customer interactions in aerospace or defense programs
• Background in multi-disciplinary system integration, spanning avionics, fluid systems, and systems engineering

XML job scraping automation by YubHub

This includes owning system architecture, machinery arrangement, mechanical details, components election and procurement, and ensuring the overall success of your systems from concept to production build support. You’ll be working closely with design, arrangement and integration of prime movers, machinery, drivetrains, thrusters, pumps, valves, fans, sensors, tanks, and other components integral to the vessel's autonomous mechanical systems.

Your work will ensure the system's efficiency, safety, and reliability, with a specific focus on the below-deck systems critical to the operation of our autonomous surface vessels.

Responsibilities

• Own the architecture, arrangement, and detailed design of propulsion and auxiliary systems for autonomous surface vessels.

• Develop analysis tools and models to characterize and validate system architectures, ensuring design satisfies all criteria and understanding the trades within system designs.

• Release and own drawings and support production teams, capturing and addressing issues quickly to minimize production downtime.

• Work closely with multidisciplinary engineering teams to integrate propulsion and auxiliary systems into the broader autonomous vessel design.

• With the test team, develop and execute test campaigns to validate propulsion and auxiliary system requirements, ensuring they meet mission-specific performance standards under a range of operating environment conditions, vehicle speeds and loading conditions.

• Support the development of propulsion and auxiliary system autonomy by defining nominal and fault states of components through failure mode analysis, and building dynamic system models with Simulink, or similar tools.

• Analyze controlled and real-world telemetry data to identify inefficiencies or potential system failures and develop corrective solutions to improve system reliability and performance.

• Participate in field testing and real-world operational assessments.

• Work with production to continuously improve product reliability, efficiency and performance by identifying and implementing innovative solutions, best practices, and process improvements.

• Own and burn down propulsion and auxiliary system-related engineering and production risks. Perform root-cause analyses to understand and resolve critical issues quickly and effectively.

• Provide subject matter expertise to the mechanical engineering and production teams, offering continuous support across programs, helping derive and refine system requirements, educating and training engineers and technicians about propulsions systems.

Qualifications

• Bachelor’s degree or greater in Mechanical Engineering, Marine Engineering, Naval Architecture, or a related field with a strong foundation in fluid mechanics.

• 2+ years of experience in the design, analysis, and build of integrated fluid and/or mechanical power systems.

• Experience or strong familiarity with diesel powertrain architecture, fuel, oil, and coolant systems, ventilation and HVAC systems, hydraulics, and/or other fluid and power systems.

• Experience with analysis and modeling of piping system flow, powertrain performance, cooling system performance, ventilation loads, and more.

• As a plus, experience using computational fluid dynamics (CFD) software (e.g., STARCCM, ANSYS Fluent, OpenFOAM, COMSOL) to simulate fluid flow and optimize system performance. In particular, conjugate heat transfer and hydrodynamic models.

• As a plus, experience with industrial automation and controls.

Benefits

• Medical Insurance: Comprehensive health insurance plans covering a range of services

• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care

• Saronic pays 100% of the premium for employees and 80% for dependents

• Time Off: Generous PTO and Holidays

• Parental Leave: Paid maternity and paternity leave to support new parents

• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses

• Retirement Plan: 401(k) plan

• Stock Options: Equity options to give employees a stake in the company’s success

• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

Physical Demands

• Prolonged periods of sitting at a desk and working on a computer

• Occasional standing and walking within the office

• Manual dexterity to operate a computer keyboard, mouse, and other office equipment

• Visual acuity to read screens, documents, and reports

• Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies

• Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)

Additional Information

This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

XML job scraping automation by YubHub

Key Responsibilities:

• Own and develop the heat exchange system for Exowatt’s power conversion unit from design and analysis in a hands-on fashion. Engage with suppliers for development, build and testing.
• Perform analysis of mechanical components and systems for heat exchangers utilizing CFD and FEA such as Ansys multiphysics, CAD (Solidworks, Creo, or equivalent.
• Design, build and test of prototype heat exchanger units for Exowatt’s power conversion units.
• Validate models by test and analytical methods
• Create detailed engineering drawings and specifications for manufacturing
• Collaborate with cross-functional teams, including electrical, controls, thermal, and software engineers
• Evaluate and select appropriate materials based on requirements, cost, and sustainability
• Design for manufacturability, assembly, and serviceability
• Interface with suppliers, manufacturers, and external engineering partners
• Participate in design reviews and ensure compliance with industry standards and regulations
• Troubleshoot issues during testing and deployment

Qualifications:

• Bachelor's degree in Mechanical Engineering or related field; Master's degree preferred
• 7+ years of mechanical engineering experience with a focus on thermal-fluid systems with a focus on heat exchanger design, analysis, and development.
• Demonstrated experience designing, analyzing, and optimizing heat exchangers (shell-and-tube, fined heat exchangers, heat sinks, printed circuit heat exchangers, heat pipes, etc) for high temperature applications.
• Hands-on experience in testing of heat exchangers, energy, and power conversion systems.
• Strong foundation in thermodynamics, conjugate heat transfer, fluid mechanics, and thermal coatings, with the ability to perform thermal and hydraulic sizing calculations
• Proficiency in 3D CAD software (SolidWorks, Creo, or similar) and experience designing complex flow paths and pressure-containing components
• Experience with FEA and CFD software (ANSYS multiphysics, Nastran, or similar) for thermal stress analysis and fatigue life prediction under cyclic operating conditions
• Familiarity with CFD tools for flow distribution, heat transfer optimization, and pressure drop analysis
• Strong understanding of GD&T ASME Y14.5 and engineering drawing standards for precision-manufactured components
• Knowledge of relevant standards and codes (ASME BPVC, TEMA, API, ISO) as applied to pressure vessels, heat exchangers, and rotating equipment
• Experience designing for demanding operating environments, including thermal cycling, high-temperature creep, and corrosive or reactive working fluids
• Experience with renewable energy systems, thermal energy storage, or concentrated solar power preferred
• Excellent communication and collaboration skills with the ability to work across multidisciplinary teams

Additional Information:

• Competitive salary and equity options
• Comprehensive benefits package, including health, dental, and retirement plans
• Dynamic work environment that fosters creativity and innovation
• Opportunities for professional growth and development in a rapidly evolving industry
• Relocation assistance

XML job scraping automation by YubHub

We are seeking a Staff Application Engineer to join our Ansys Customer Excellence team. As a Staff Application Engineer, you will be responsible for leading and coordinating all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.

Responsibilities

• Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.
• Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.
• Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.
• Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.
• Collaborate with product development teams to translate customer requirements into innovative product features and best practices
• Test rigorously new Ansys product releases on real-world industrial problems and contribute to the creation of application best practices.
• Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain

Requirements

• MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).
• Strong background in fluid mechanics and computational fluid dynamics (CFD) and thermodynamics with practical application in the electronics industry.
• Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.
• Experience integrating simulation solutions into customer design workflows at the package, board, and system level.
• Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.
• Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.
• Willingness and ability to travel domestically up to 25% (potentially up to 50%) as required.

What You'll Need

• Logical problem-solver with strong interpersonal and communication skills, fluent in English (written and spoken).
• Highly organized, self-motivated, and able to manage multiple projects simultaneously with a sense of urgency.
• Business-savvy and professional, projecting confidence and credibility in all interactions.
• Collaborative team player who thrives in cross-functional environments and is willing to mentor others.
• Professional, driven to succeed, and results-focused, with a commitment to continuous improvement within a fast-paced, innovative company

Salary and Benefits

We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.

Work Environment

You will join the Ansys Customer Excellence team, a diverse group of talented engineers and technical specialists dedicated to empowering customers and advancing simulation-driven innovation. The team emphasizes a collaborative culture, sharing expertise, continuously learning, and delivering exceptional service across a wide range of industries, with a special focus on electronics thermal management.

Why Join Us

• Accelerate customer adoption of Ansys engineering simulation solutions, driving business growth and customer success.
• Enhance the quality and efficiency of customer design workflows, enabling breakthroughs in electronics thermal management.
• Influence the evolution of Ansys products by providing critical feedback and innovative ideas based on real-world customer needs.
• Serve as a trusted advisor, elevating Synopsys' reputation as a leader in simulation technology for the electronics industry.
• Empower customers to solve their most complex engineering problems, fostering long-term partnerships and loyalty.
• Contribute to thought leadership within the industry by sharing expertise at conferences, webinars, and training events.
• Drive internal knowledge sharing, mentoring junior team members, and promoting best practices across the organization.

How to Apply

If you're a motivated and experienced engineer looking to take your career to the next level, please submit your application, including your resume and a cover letter, to our careers website.

XML job scraping automation by YubHub

We currently have 614 open roles

Innovation Starts Here

Find Jobs For

Where?When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

Staff Application Engineer (Electronics Thermal Management) - Northern California (16451)

San Jose, California, United States

Save

Category: Engineering Hire Type: Employee

Job ID 16451 Base Salary Range $112000-$168000 Date posted 03/24/2026

You are a passionate engineering professional with a deep curiosity for solving complex thermal management challenges in electronics. With a strong foundation in mechanical engineering and a specialized focus on thermodynamics, fluid mechanics and computational fluid dynamics (CFD), you thrive in environments where innovation meets real-world applications. Your experience with engineering simulation tools,especially Ansys products such as Fluent, Icepak, or Mechanical,sets you apart as a trusted subject matter expert. Your expertise is matched by your desire to collaborate closely with customers, understanding their unique design workflows, and translating their requirements into state-of-the-art simulation solutions. You are comfortable working independently as well as within multi-disciplinary teams and are adept at communicating complex technical concepts to both technical and non-technical audiences.

You are driven by a commitment to continuous learning, staying ahead of industry trends, and sharing your knowledge through training, presentations, and customer engagements. Your professional demeanor, business acumen, and strong organizational skills enable you to manage multiple priorities effectively while maintaining a high level of customer satisfaction. You are excited by the prospect of influencing product development, supporting sales and marketing efforts, and making a tangible impact on both Synopsys and the broader electronics industry.

This opportunity is based in or near San Jose, Sacramento, or Pleasanton and the hired candidate will support customers located in Northern California including covering the Bay area.

What You’ll Be Doing:

• Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.
• Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.
• Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.
• Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.
• Collaborate with product development teams to translate customer requirements into innovative product features and best practices
• Test rigorously new Anysyparticular product releases on real-world industrial problems and contribute to the creation of application best practices.
• Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain
• Provide consulting services and conduct training classes for customers, enabling them to maximize the value of Ansys solutions.
• Travel domestically to customer sites, conferences, and industry events to provide hands-on support and build lasting relationships (up to 25%, with flexibility for up to 50%).

The Impact You Will Have:

• Accelerate customer adoption of Ansys engineering simulation solutions, driving business growth and customer success.
• Enhance the quality and efficiency of customer design workflows, enabling breakthroughs in electronics thermal management.
• Influence the evolution of Ansys products by providing critical feedback and innovative ideas based on real-world customer needs.
• Serve as a trusted advisor, elevating Synopsys’ reputation as a leader in simulation technology for the electronics industry.
• Empower customers to solve their most complex engineering problems, fostering long-term partnerships and loyalty.
• Contribute to thought leadership within the industry by sharing expertise at conferences, webinars, and training events.
• Drive internal knowledge sharing, mentoring junior team members, and promoting best practices across the organization.

What You’ll Need:

• MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).
• Strong background in fluid mechanics and computational fluid dynamics (CFD) and thermodynamics with practical application in the electronics industry.
• Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.
• Experience integrating simulation solutions into customer design workflows at the package, board, and system level.
• Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.
• Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.
• Willingness and ability to travel domestically up to 25% (potentially up to 50%) as required.

Who You Are:

• Logical problem-solver with strong interpersonal and communication skills, fluent in English (written and spoken).
• Highly organized, self-motivated, and able to manage multiple projects simultaneously with a sense of urgency.
• Business-savvy and professional, projecting confidence and credibility in all interactions.
• Collaborative team player who thrives in cross-functional environments and is willing to mentor others.
• Professional, driven to succeed, and results-focused, with a commitment to continuous improvement within a fast-paced, innovative company

The Team You’ll Be A Part Of:

You will join the Ansys Customer Excellence team, a diverse group of talented engineers and technical specialists dedicated to empowering customers and advancing simulation-driven innovation. The team emphasizes a collaborative culture, sharing expertise, continuously learning and delivering exceptional service across a wide range of industries, with a special focus on electronics thermal management. Together, you will solve complex challenges, drive product advancement, and make a measurable impact on the future of electronic design.

Rewards and Benefits:

We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. You

XML job scraping automation by YubHub

What you'll do

As a Software Developer, you will be responsible for developing, implementing, and maintaining combustion and reactive-flow models within a finite volume CFD solver environment. You will also enhance numerical algorithms to improve stability, accuracy, and computational performance, including adaptation for parallel and high performance computing environments.

What you need

• PhD in Mechanical Engineering, Chemical Engineering, Physics, Computational Engineering, or a related technical discipline
• Strong theoretical understanding of combustion, fluid mechanics, thermodynamics, and heat transfer
• Experience with finite volume CFD methods and numerical discretization techniques
• Proficiency in C++ or Fortran for scientific or engineering software development; additional experience with Python is advantageous

XML job scraping automation by YubHub

What you'll do

Our Hardware Engineers at Synopsys are responsible for designing and developing cutting-edge semiconductor solutions. They work on intricate tasks such as chip architecture, circuit design, and verification to ensure the efficiency and reliability of semiconductor products. These engineers play a crucial role in advancing technology and enabling innovations in various industries.

Play Video

Job Description

Date posted 12/14/2025

Category EngineeringHire Type EmployeeJob ID 13730Base Salary Range $112000-$168000Remote Eligible NoDate Posted 12/14/2025

What you'll do

• Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.
• Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.
• Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.
• Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.
• Collaborate with product development teams to translate customer requirements into innovative product features and best practices
• Test rigorously new Ansys product releases on real-world industrial problems and contribute to the creation of application best practices.
• Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain
• Provide consulting services and conduct training classes for customers, enabling them to maximize the value of Ansys solutions.
• Travel domestically to customer sites, conferences, and industry events to provide hands-on support and build lasting relationships (up to 25%, with flexibility for up to 50%).

What you need

• MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).
• Strong background in fluid mechanics and computational fluid dynamics (CFD)and thermodynamics with practical application in the electronics industry.
• Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.
• Experience integrating simulation solutions into customer design workflows at the package, board, and system level.
• Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.
• Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.
• Willingness and ability to travel domestically up to 25% (potentially up to 50%).

XML job scraping automation by YubHub