{"version":"0.1","company":{"name":"YubHub","url":"https://yubhub.co","jobsUrl":"https://yubhub.co/jobs/skill/computational-fluid-dynamics"},"x-facet":{"type":"skill","slug":"computational-fluid-dynamics","display":"Computational Fluid Dynamics","count":12},"x-feed-size-limit":100,"x-feed-sort":"enriched_at desc","x-feed-notice":"This feed contains at most 100 jobs (the most recently enriched). For the full corpus, use the paginated /stats/by-facet endpoint or /search.","x-generator":"yubhub-xml-generator","x-rights":"Free to redistribute with attribution: \"Data by YubHub (https://yubhub.co)\"","x-schema":"Each entry in `jobs` follows https://schema.org/JobPosting. YubHub-native raw fields carry `x-` prefix.","jobs":[{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_46bdfe2d-ffb"},"title":"Senior Aerodynamics Engineer, Air Vehicles","description":"<p><strong>ABOUT THE ROLE</strong></p>\n<p>The Air Dominance and Strike Aerodynamics Engineering Team is responsible for the advanced aerodynamic design and analysis for Group 5 air vehicles and missile platforms. As a Senior Aerodynamics Engineer, you will own the full development lifecycle, from conceptual design to flight test planning, execution, and analysis, ensuring high-performance, resilient, and scalable systems that meet the demands of complex, contested environments.</p>\n<p><strong>RESPONSIBILITIES</strong></p>\n<ul>\n<li>Aerodynamic design of unmanned air vehicles/missiles at conceptual, preliminary, and detail design maturities</li>\n<li>Aerodynamic analysis of unmanned air vehicles, using both low and high order methods, including analysis tool development and improvement as needed</li>\n<li>Stability and control analysis</li>\n<li>Aircraft performance modeling and simulation</li>\n<li>Aerodynamic loads generation</li>\n<li>Wind tunnel test planning, execution, and analysis</li>\n<li>Flight test planning, execution, and analysis</li>\n</ul>\n<p><strong>REQUIRED QUALIFICATIONS</strong></p>\n<ul>\n<li>BS or higher degree in Aerospace Engineering</li>\n<li>8+ work experience as an individual contributing engineer</li>\n<li>Experience with aircraft performance and analysis predictions</li>\n<li>Competent in a variety of aerodynamic analysis techniques including hand calculations, vortex, lattice methods, panel methods, and computational fluid dynamics (CFD)</li>\n<li>Wind tunnel and flight test experience including data acquisition, data analysis, and project coordination</li>\n<li>Strong programming skills in higher-level languages (e.g., MATLAB, Python) for internal tool development in a version-controlled environment</li>\n<li>Experience preparing formal documentation (i.e., specifications, test procedures, technical reports, etc.)</li>\n<li>Passion for defending the United States and her allies</li>\n<li>Eligible to obtain and maintain an active U.S. Secret security clearance</li>\n</ul>\n<p><strong>PREFERRED QUALIFICATIONS</strong></p>\n<ul>\n<li>StarCCM+ experience</li>\n<li>Ice accretion or icing analysis experience</li>\n<li>Missile DATCOM, OTIS, or DYMOS</li>\n<li>Experience with transonic and supersonic flow regimes</li>\n<li>Active U.S. Secret security clearance</li>\n</ul>\n<p><strong>BENEFITS</strong></p>\n<p>Anduril offers top-tier benefits for full-time employees, including:</p>\n<ul>\n<li>Healthcare Benefits</li>\n<li>Income Protection</li>\n<li>Generous time off</li>\n<li>Family Planning &amp; Parenting Support</li>\n<li>Mental Health Resources</li>\n<li>Professional Development</li>\n<li>Commuter Benefits</li>\n<li>Relocation Assistance</li>\n<li>Retirement Savings Plan</li>\n</ul>\n<p><strong>PROTECTING YOURSELF FROM RECRUITMENT SCAMS</strong></p>\n<p>Anduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We&#39;ve observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.</p>\n<p>To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:</p>\n<ul>\n<li>No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.</li>\n<li>Please always verify communications:</li>\n<li>Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.</li>\n<li>Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency&#39;s authenticity by reaching out to contact@anduril.com.</li>\n<li>Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender&#39;s email domain is @anduril.com before providing any personal information or clicking on links.</li>\n<li>What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to contact@anduril.com. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.</li>\n</ul>\n<p><strong>DATA PRIVACY</strong></p>\n<p>Anduril is committed to protecting the privacy of our candidates and employees. We collect and use personal data in accordance with applicable laws and regulations. For more information, please refer to our Privacy Policy.</p>\n<p>We are an equal opportunities employer and welcome applications from diverse candidates. We are committed to creating an inclusive workplace where everyone feels valued, respected, and supported.</p>\n<p>If you have any questions or concerns about this role or our application process, please don&#39;t hesitate to reach out to us at contact@anduril.com.</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_46bdfe2d-ffb","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Anduril","sameAs":"https://www.anduril.com/","logo":"https://logos.yubhub.co/anduril.com.png"},"x-apply-url":"https://job-boards.greenhouse.io/andurilindustries/jobs/4629832007","x-work-arrangement":"onsite","x-experience-level":"senior","x-job-type":"full-time","x-salary-range":"$166,000-$220,000 USD","x-skills-required":["Aerodynamic design","Aerodynamic analysis","Stability and control analysis","Aircraft performance modeling and simulation","Aerodynamic loads generation","Wind tunnel test planning and execution","Flight test planning and execution","Computational fluid dynamics (CFD)","MATLAB","Python","Version-controlled environment","Formal documentation preparation"],"x-skills-preferred":["StarCCM+","Ice accretion or icing analysis","Missile DATCOM, OTIS, or DYMOS","Transonic and supersonic flow regimes"],"datePosted":"2026-04-18T15:53:24.434Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Costa Mesa, California, United States"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"Aerodynamic design, Aerodynamic analysis, Stability and control analysis, Aircraft performance modeling and simulation, Aerodynamic loads generation, Wind tunnel test planning and execution, Flight test planning and execution, Computational fluid dynamics (CFD), MATLAB, Python, Version-controlled environment, Formal documentation preparation, StarCCM+, Ice accretion or icing analysis, Missile DATCOM, OTIS, or DYMOS, Transonic and supersonic flow regimes","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":166000,"maxValue":220000,"unitText":"YEAR"}}},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_e3655fbb-f34"},"title":"Aerodynamics Engineer, Hypersonic Air Vehicles","description":"<p>The Air Dominance and Strike Aerodynamics Engineering Team is responsible for the advanced aerodynamic design and analysis for Group 5 hypersonic air vehicles and missile platforms. As an Aerodynamics Engineer, you will own the full development lifecycle, from conceptual design to flight test planning, execution, and analysis. Your expertise will ensure high-performance, resilient, and scalable systems that meet the demands of complex, contested environments.</p>\n<p>Key responsibilities include:</p>\n<ul>\n<li>Aerodynamics design of unmanned air vehicles/missiles at conceptual, preliminary, and detailed design maturities</li>\n<li>Aerodynamics analysis of unmanned air vehicles, using both low and high order methods, including analysis tool development and improvement as needed</li>\n<li>Stability and control analysis</li>\n<li>Trajectory optimization for performance analysis, vehicle conceptual trades, and sensitivities</li>\n<li>Aerothermodynamic analysis of flight vehicles in high-speed environments</li>\n<li>Aircraft performance modeling and simulation</li>\n<li>Aerodynamic loads generation</li>\n<li>Wind tunnel test planning, execution, and analysis</li>\n<li>Flight test planning, execution, and analysis</li>\n</ul>\n<p>Required qualifications include:</p>\n<ul>\n<li>BS or higher degree in Aerospace Engineering</li>\n<li>Experience with a variety of aerodynamic analysis techniques including hand calculations, lower-order codes, and computational fluid dynamics (CFD)</li>\n<li>Strong programming skills in higher-level languages (e.g., MATLAB, Python) for internal tool development in a version-controlled environment</li>\n<li>Experience preparing formal documentation (i.e., specifications, test procedures, technical reports, etc.)</li>\n<li>Passion for defending the United States and her allies</li>\n<li>Ability to obtain and hold a U.S. Top Secret security clearance</li>\n</ul>\n<p>Preferred qualifications include:</p>\n<ul>\n<li>StarCCM+ experience</li>\n<li>Experience evaluating external aerodynamics characteristics of a vehicle in the supersonic or hypersonic flow regime</li>\n<li>Experience with aerothermal analysis</li>\n<li>Experience leveraging trajectory optimization software for performance analysis, vehicle conceptual trades, and/or sensitivities</li>\n<li>Knowledge of high-speed aerodynamic laminar, transitional, and turbulent simulation techniques</li>\n<li>Experience with chemical kinetics modeling and simulation</li>\n<li>Experience with combustion computational fluid dynamics and a foundational understanding of compressible flow</li>\n<li>Active U.S. Secret security clearance</li>\n</ul>\n<p>US Salary Range: $146,000-$194,000 USD</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_e3655fbb-f34","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Anduril","sameAs":"https://www.anduril.com/","logo":"https://logos.yubhub.co/anduril.com.png"},"x-apply-url":"https://job-boards.greenhouse.io/andurilindustries/jobs/5032351007","x-work-arrangement":"onsite","x-experience-level":"senior","x-job-type":"full-time","x-salary-range":"$146,000-$194,000 USD","x-skills-required":["Aerospace Engineering","Computational Fluid Dynamics","MATLAB","Python","Formal Documentation"],"x-skills-preferred":["StarCCM+","Aerothermal Analysis","Trajectory Optimization Software","High-Speed Aerodynamic Simulation Techniques","Chemical Kinetics Modeling and Simulation"],"datePosted":"2026-04-18T15:47:52.683Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Costa Mesa, California, United States"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"Aerospace Engineering, Computational Fluid Dynamics, MATLAB, Python, Formal Documentation, StarCCM+, Aerothermal Analysis, Trajectory Optimization Software, High-Speed Aerodynamic Simulation Techniques, Chemical Kinetics Modeling and Simulation","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":146000,"maxValue":194000,"unitText":"YEAR"}}},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_f1d67046-deb"},"title":"Propulsion and Auxiliary Systems Engineer","description":"<p>We are seeking a talented Propulsion and Auxiliary Systems Engineer to join our team. In this role, you will be responsible for analysis, design, and production support of fluid, power, and thrust-generating unmanned surface vessel systems.</p>\n<p>This includes owning system architecture, machinery arrangement, mechanical details, components election and procurement, and ensuring the overall success of your systems from concept to production build support. You’ll be working closely with design, arrangement and integration of prime movers, machinery, drivetrains, thrusters, pumps, valves, fans, sensors, tanks, and other components integral to the vessel&#39;s autonomous mechanical systems.</p>\n<p>Your work will ensure the system&#39;s efficiency, safety, and reliability, with a specific focus on the below-deck systems critical to the operation of our autonomous surface vessels.</p>\n<p><strong>Responsibilities</strong></p>\n<ul>\n<li>Own the architecture, arrangement, and detailed design of propulsion and auxiliary systems for autonomous surface vessels.</li>\n</ul>\n<ul>\n<li>Develop analysis tools and models to characterize and validate system architectures, ensuring design satisfies all criteria and understanding the trades within system designs.</li>\n</ul>\n<ul>\n<li>Release and own drawings and support production teams, capturing and addressing issues quickly to minimize production downtime.</li>\n</ul>\n<ul>\n<li>Work closely with multidisciplinary engineering teams to integrate propulsion and auxiliary systems into the broader autonomous vessel design.</li>\n</ul>\n<ul>\n<li>With the test team, develop and execute test campaigns to validate propulsion and auxiliary system requirements, ensuring they meet mission-specific performance standards under a range of operating environment conditions, vehicle speeds and loading conditions.</li>\n</ul>\n<ul>\n<li>Support the development of propulsion and auxiliary system autonomy by defining nominal and fault states of components through failure mode analysis, and building dynamic system models with Simulink, or similar tools.</li>\n</ul>\n<ul>\n<li>Analyze controlled and real-world telemetry data to identify inefficiencies or potential system failures and develop corrective solutions to improve system reliability and performance.</li>\n</ul>\n<ul>\n<li>Participate in field testing and real-world operational assessments.</li>\n</ul>\n<ul>\n<li>Work with production to continuously improve product reliability, efficiency and performance by identifying and implementing innovative solutions, best practices, and process improvements.</li>\n</ul>\n<ul>\n<li>Own and burn down propulsion and auxiliary system-related engineering and production risks. Perform root-cause analyses to understand and resolve critical issues quickly and effectively.</li>\n</ul>\n<ul>\n<li>Provide subject matter expertise to the mechanical engineering and production teams, offering continuous support across programs, helping derive and refine system requirements, educating and training engineers and technicians about propulsions systems.</li>\n</ul>\n<p><strong>Qualifications</strong></p>\n<ul>\n<li>Bachelor’s degree or greater in Mechanical Engineering, Marine Engineering, Naval Architecture, or a related field with a strong foundation in fluid mechanics.</li>\n</ul>\n<ul>\n<li>2+ years of experience in the design, analysis, and build of integrated fluid and/or mechanical power systems.</li>\n</ul>\n<ul>\n<li>Experience or strong familiarity with diesel powertrain architecture, fuel, oil, and coolant systems, ventilation and HVAC systems, hydraulics, and/or other fluid and power systems.</li>\n</ul>\n<ul>\n<li>Experience with analysis and modeling of piping system flow, powertrain performance, cooling system performance, ventilation loads, and more.</li>\n</ul>\n<ul>\n<li>As a plus, experience using computational fluid dynamics (CFD) software (e.g., STARCCM, ANSYS Fluent, OpenFOAM, COMSOL) to simulate fluid flow and optimize system performance. In particular, conjugate heat transfer and hydrodynamic models.</li>\n</ul>\n<ul>\n<li>As a plus, experience with industrial automation and controls.</li>\n</ul>\n<p><strong>Benefits</strong></p>\n<ul>\n<li>Medical Insurance: Comprehensive health insurance plans covering a range of services</li>\n</ul>\n<ul>\n<li>Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care</li>\n</ul>\n<ul>\n<li>Saronic pays 100% of the premium for employees and 80% for dependents</li>\n</ul>\n<ul>\n<li>Time Off: Generous PTO and Holidays</li>\n</ul>\n<ul>\n<li>Parental Leave: Paid maternity and paternity leave to support new parents</li>\n</ul>\n<ul>\n<li>Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses</li>\n</ul>\n<ul>\n<li>Retirement Plan: 401(k) plan</li>\n</ul>\n<ul>\n<li>Stock Options: Equity options to give employees a stake in the company’s success</li>\n</ul>\n<ul>\n<li>Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage</li>\n</ul>\n<ul>\n<li>Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office</li>\n</ul>\n<p><strong>Physical Demands</strong></p>\n<ul>\n<li>Prolonged periods of sitting at a desk and working on a computer</li>\n</ul>\n<ul>\n<li>Occasional standing and walking within the office</li>\n</ul>\n<ul>\n<li>Manual dexterity to operate a computer keyboard, mouse, and other office equipment</li>\n</ul>\n<ul>\n<li>Visual acuity to read screens, documents, and reports</li>\n</ul>\n<ul>\n<li>Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies</li>\n</ul>\n<ul>\n<li>Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages)</li>\n</ul>\n<p><strong>Additional Information</strong></p>\n<p>This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_f1d67046-deb","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Saronic Technologies","sameAs":"https://www.saronictechnologies.com","logo":"https://logos.yubhub.co/saronictechnologies.com.png"},"x-apply-url":"https://jobs.lever.co/saronic/46a0ea07-549b-40c7-91ab-599466d9d574","x-work-arrangement":"onsite","x-experience-level":"mid","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["Mechanical Engineering","Marine Engineering","Naval Architecture","Fluid Mechanics","Diesel Powertrain Architecture","Fuel System Design","Oil and Coolant System Design","Ventilation and HVAC System Design","Hydraulics","Piping System Flow Analysis","Powertrain Performance Analysis","Cooling System Performance Analysis","Ventilation Loads Analysis","Computational Fluid Dynamics (CFD)","Simulink","Industrial Automation and Controls"],"x-skills-preferred":[],"datePosted":"2026-04-17T12:58:16.660Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"San Francisco"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"Mechanical Engineering, Marine Engineering, Naval Architecture, Fluid Mechanics, Diesel Powertrain Architecture, Fuel System Design, Oil and Coolant System Design, Ventilation and HVAC System Design, Hydraulics, Piping System Flow Analysis, Powertrain Performance Analysis, Cooling System Performance Analysis, Ventilation Loads Analysis, Computational Fluid Dynamics (CFD), Simulink, Industrial Automation and Controls"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_dc362216-2dd"},"title":"Staff Application Engineer (Electronics Thermal Management)","description":"<p><strong>Job Summary</strong></p>\n<p>We are seeking a Staff Application Engineer to join our Ansys Customer Excellence team. As a Staff Application Engineer, you will be responsible for leading and coordinating all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.</p>\n<p><strong>Responsibilities</strong></p>\n<ul>\n<li>Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.</li>\n<li>Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.</li>\n<li>Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.</li>\n<li>Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.</li>\n<li>Collaborate with product development teams to translate customer requirements into innovative product features and best practices</li>\n<li>Test rigorously new Ansys product releases on real-world industrial problems and contribute to the creation of application best practices.</li>\n<li>Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain</li>\n</ul>\n<p><strong>Requirements</strong></p>\n<ul>\n<li>MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).</li>\n<li>Strong background in fluid mechanics and computational fluid dynamics (CFD) and thermodynamics with practical application in the electronics industry.</li>\n<li>Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.</li>\n<li>Experience integrating simulation solutions into customer design workflows at the package, board, and system level.</li>\n<li>Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.</li>\n<li>Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.</li>\n<li>Willingness and ability to travel domestically up to 25% (potentially up to 50%) as required.</li>\n</ul>\n<p><strong>What You&#39;ll Need</strong></p>\n<ul>\n<li>Logical problem-solver with strong interpersonal and communication skills, fluent in English (written and spoken).</li>\n<li>Highly organized, self-motivated, and able to manage multiple projects simultaneously with a sense of urgency.</li>\n<li>Business-savvy and professional, projecting confidence and credibility in all interactions.</li>\n<li>Collaborative team player who thrives in cross-functional environments and is willing to mentor others.</li>\n<li>Professional, driven to succeed, and results-focused, with a commitment to continuous improvement within a fast-paced, innovative company</li>\n</ul>\n<p><strong>Salary and Benefits</strong></p>\n<p>We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.</p>\n<p><strong>Work Environment</strong></p>\n<p>You will join the Ansys Customer Excellence team, a diverse group of talented engineers and technical specialists dedicated to empowering customers and advancing simulation-driven innovation. The team emphasizes a collaborative culture, sharing expertise, continuously learning, and delivering exceptional service across a wide range of industries, with a special focus on electronics thermal management.</p>\n<p><strong>Why Join Us</strong></p>\n<ul>\n<li>Accelerate customer adoption of Ansys engineering simulation solutions, driving business growth and customer success.</li>\n<li>Enhance the quality and efficiency of customer design workflows, enabling breakthroughs in electronics thermal management.</li>\n<li>Influence the evolution of Ansys products by providing critical feedback and innovative ideas based on real-world customer needs.</li>\n<li>Serve as a trusted advisor, elevating Synopsys&#39; reputation as a leader in simulation technology for the electronics industry.</li>\n<li>Empower customers to solve their most complex engineering problems, fostering long-term partnerships and loyalty.</li>\n<li>Contribute to thought leadership within the industry by sharing expertise at conferences, webinars, and training events.</li>\n<li>Drive internal knowledge sharing, mentoring junior team members, and promoting best practices across the organization.</li>\n</ul>\n<p><strong>How to Apply</strong></p>\n<p>If you&#39;re a motivated and experienced engineer looking to take your career to the next level, please submit your application, including your resume and a cover letter, to our careers website.</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_dc362216-2dd","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/san-jose/staff-application-engineer-electronics-thermal-management-central-eastern-us-16194/44408/92965324576","x-work-arrangement":"onsite","x-experience-level":"staff","x-job-type":"full-time","x-salary-range":"$112,000-$168,000","x-skills-required":["Ansys software","Fluid mechanics","Computational fluid dynamics","Thermodynamics","CAE, CAD, EDA, or PLM tools","Multiphysics simulation approaches","Interpersonal and communication skills"],"x-skills-preferred":[],"datePosted":"2026-04-05T13:23:14.922Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"San Jose"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"Ansys software, Fluid mechanics, Computational fluid dynamics, Thermodynamics, CAE, CAD, EDA, or PLM tools, Multiphysics simulation approaches, Interpersonal and communication skills","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":112000,"maxValue":168000,"unitText":"YEAR"}}},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_0ea386d1-92b"},"title":"Applications Engineering, Staff Engineer - Multiphase Flow","description":"<p>Engineer the Future with Us</p>\n<p>We currently have 613 open roles</p>\n<p><strong>Innovation Starts Here</strong></p>\n<p>Find Jobs For</p>\n<p>Where?When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.</p>\n<p><strong>Applications Engineering, Staff Engineer - Multiphase Flow (f/m)</strong></p>\n<p>Madrid, Spain</p>\n<p>Save</p>\n<p>Category: EngineeringHire Type: Employee</p>\n<p><strong>Job ID</strong> 16066<strong>Date posted</strong> 03/18/2026</p>\n<p><strong>We Are:</strong></p>\n<p>At Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence, from self-driving cars to learning machines. We lead in chip design, verification, and IP integration, empowering the creation of high-performance silicon chips and software content. Join us to transform the future through continuous technological innovation.</p>\n<p><strong>You Are:</strong></p>\n<p>You are a passionate engineer with deep expertise in Computational Fluid Dynamics (CFD) and multiphase flow simulation, eager to make a meaningful impact in the industrial sector. You thrive in collaborative environments and enjoy engaging with customers to solve complex engineering challenges. Your experience bridges both technical mastery and interpersonal skills, making you a trusted partner in both presales and post-sales activities. You bring a hands-on approach to problem solving and are comfortable translating technical concepts into actionable solutions for diverse audiences. You are motivated by continuous learning and enjoy staying ahead of technological advancements in simulation and engineering. With your strong analytical mindset and commitment to excellence, you see every customer interaction as an opportunity to drive innovation and enhance product adoption. You are excited by the prospect of working in a dynamic team environment, contributing to the growth of Ansys fluids in industry, and being recognized as a thought leader in your field.</p>\n<p><strong>What You’ll Be Doing:</strong></p>\n<ul>\n<li>Leading the coordination and execution of all technical activities throughout the lifecycle of a sales opportunity, e.g. technical discovery, negotiation of technical success criteria, product presentations, demonstrations and evaluations.</li>\n</ul>\n<ul>\n<li>As a credible hands-on expert in the customer&#39;s application, you will be working with customers to better understand their product development requirements and what they need to improve their performance metrics. You will be addressing application-specific design and simulation requirements by utilizing the relevant Ansys product technologies and platforms that best meet the customer&#39;s needs. You will internalize the Synopsys value proposition and convince the customer of the compelling reasons to use Ansys tools.</li>\n</ul>\n<ul>\n<li>Supporting the development of differentiating simulation solutions using the Ansys platform and our products; implement our ons into your customers&#39; design workflows. Expand your expertise and become a recognized expert in your field of application.</li>\n</ul>\n<ul>\n<li>Collaborating with Synopsys Product Development to translate customer requirements into new product features; participate in the testing of new Ansys product releases, develop application best practices</li>\n</ul>\n<ul>\n<li>Supporting the Synopsys Field and Digital Marketing team by developing promotional materials and supporting events, author conference presentations.</li>\n</ul>\n<ul>\n<li>Contributing to and leading professional service deliveries and conducting training classes.</li>\n</ul>\n<p><strong>The Impact You Will Have:</strong></p>\n<ul>\n<li>Accelerating the adoption of Ansys multiphase flow solutions across key industrial sectors.</li>\n</ul>\n<ul>\n<li>Enhancing customer satisfaction by delivering expert technical support and innovative solutions.</li>\n</ul>\n<ul>\n<li>Driving technical excellence through the application of advanced simulation methodologies.</li>\n</ul>\n<ul>\n<li>Contributing to the team’s knowledge base and best practices, fostering continuous improvement.</li>\n</ul>\n<ul>\n<li>Building strong relationships with customers, establishing Synopsys as a trusted partner.</li>\n</ul>\n<ul>\n<li>Shaping product development by providing valuable feedback from industry engagements.</li>\n</ul>\n<p><strong>What You’ll Need:</strong></p>\n<ul>\n<li>Bachelor, Master or PhD degree in Mechanical, Aerospace engineering or related field.</li>\n</ul>\n<ul>\n<li>Minimum years of professional experience in an engineering software environment: MS+3, PhD+0 (MS+6 or PhD+3 preferred).</li>\n</ul>\n<ul>\n<li>2 years of experience in application engineering, customer support, or consulting services type customer facing roles using engineering software.</li>\n</ul>\n<ul>\n<li>Demonstrated use of relevant Ansys software or knowledge of other commercial CAE software packages.</li>\n</ul>\n<ul>\n<li>In depth knowledge of one or more Multiphase Fluid Modelling methods (VOF, Eulerian, DPM, SPH, Wall Flim, etc.) in an industrial setting.</li>\n</ul>\n<ul>\n<li>Solid understanding of engineering principles related to fluid dynamics and simulation.</li>\n</ul>\n<ul>\n<li>Ability to create and deliver high quality technical presentations and training materials.</li>\n</ul>\n<ul>\n<li>Experience collaborating with customers and internal teams to solve complex engineering challenges.</li>\n</ul>\n<ul>\n<li>Ability to travel up to 25% of time.</li>\n</ul>\n<p><strong>Who You Are:</strong></p>\n<ul>\n<li>Effective communicator, able to engage both technical and non-technical audiences.</li>\n</ul>\n<ul>\n<li>Proactive problem solver with a customer-focused mindset.</li>\n</ul>\n<ul>\n<li>Collaborative team player who thrives in dynamic environments.</li>\n</ul>\n<ul>\n<li>Adaptable and eager to learn new technologies and methodologies.</li>\n</ul>\n<ul>\n<li>Analytical thinker with strong organizational skills.</li>\n</ul>\n<ul>\n<li>Works independently, results-oriented, across teams and organizations.</li>\n</ul>\n<p><strong>The Team You’ll Be A Part Of:</strong></p>\n<p>You will join a dedicated team of Application Engineers focused on increasing the presence of Ansys multiphase flow solutions within various engineering sectors and industries. The team collaborates closely with customers, product development, and sales to drive technical excellence and growth. Together, you will work to empower customers, deliver innovative solutions, and shape the future of industrial simulation.</p>\n<p><strong>Rewards and Benefits:</strong></p>\n<p>We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.</p>\n<p>#AnsysJob</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_0ea386d1-92b","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/madrid/applications-engineering-staff-engineer-multiphase-flow-f-m/44408/92956733440","x-work-arrangement":null,"x-experience-level":"staff","x-job-type":"employee","x-salary-range":null,"x-skills-required":["Computational Fluid Dynamics (CFD)","multiphase flow simulation","Ansys software","commercial CAE software packages","Multiphase Fluid Modelling methods (VOF, Eulerian, DPM, SPH, Wall Flim, etc.)","fluid dynamics and simulation","technical presentations and training materials","customer-facing roles","engineering software"],"x-skills-preferred":[],"datePosted":"2026-04-05T13:22:59.029Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Madrid"}},"occupationalCategory":"engineering","skills":"Computational Fluid Dynamics (CFD), multiphase flow simulation, Ansys software, commercial CAE software packages, Multiphase Fluid Modelling methods (VOF, Eulerian, DPM, SPH, Wall Flim, etc.), fluid dynamics and simulation, technical presentations and training materials, customer-facing roles, engineering software"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_258b189a-627"},"title":"Staff Application Engineer (Electronics Thermal Management)","description":"<p>Engineer the Future with Us</p>\n<p>We currently have 614 open roles</p>\n<p><strong>Innovation Starts Here</strong></p>\n<p>Find Jobs For</p>\n<p>Where?When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.</p>\n<p><strong>Staff Application Engineer (Electronics Thermal Management) - Northern California (16451)</strong></p>\n<p>San Jose, California, United States</p>\n<p>Save</p>\n<p>Category: Engineering Hire Type: Employee</p>\n<p><strong>Job ID</strong> 16451 <strong>Base Salary Range</strong> $112000-$168000 <strong>Date posted</strong> 03/24/2026</p>\n<p>You are a passionate engineering professional with a deep curiosity for solving complex thermal management challenges in electronics. With a strong foundation in mechanical engineering and a specialized focus on thermodynamics, fluid mechanics and computational fluid dynamics (CFD), you thrive in environments where innovation meets real-world applications. Your experience with engineering simulation tools,especially Ansys products such as Fluent, Icepak, or Mechanical,sets you apart as a trusted subject matter expert. Your expertise is matched by your desire to collaborate closely with customers, understanding their unique design workflows, and translating their requirements into state-of-the-art simulation solutions. You are comfortable working independently as well as within multi-disciplinary teams and are adept at communicating complex technical concepts to both technical and non-technical audiences.</p>\n<p>You are driven by a commitment to continuous learning, staying ahead of industry trends, and sharing your knowledge through training, presentations, and customer engagements. Your professional demeanor, business acumen, and strong organizational skills enable you to manage multiple priorities effectively while maintaining a high level of customer satisfaction. You are excited by the prospect of influencing product development, supporting sales and marketing efforts, and making a tangible impact on both Synopsys and the broader electronics industry.</p>\n<p>This opportunity is based in or near San Jose, Sacramento, or Pleasanton and the hired candidate will support customers located in Northern California including covering the Bay area.</p>\n<p><strong>What You’ll Be Doing:</strong></p>\n<ul>\n<li>Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.</li>\n<li>Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.</li>\n<li>Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.</li>\n<li>Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.</li>\n<li>Collaborate with product development teams to translate customer requirements into innovative product features and best practices</li>\n<li>Test rigorously new Anysyparticular product releases on real-world industrial problems and contribute to the creation of application best practices.</li>\n<li>Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain</li>\n<li>Provide consulting services and conduct training classes for customers, enabling them to maximize the value of Ansys solutions.</li>\n<li>Travel domestically to customer sites, conferences, and industry events to provide hands-on support and build lasting relationships (up to 25%, with flexibility for up to 50%).</li>\n</ul>\n<p><strong>The Impact You Will Have:</strong></p>\n<ul>\n<li>Accelerate customer adoption of Ansys engineering simulation solutions, driving business growth and customer success.</li>\n<li>Enhance the quality and efficiency of customer design workflows, enabling breakthroughs in electronics thermal management.</li>\n<li>Influence the evolution of Ansys products by providing critical feedback and innovative ideas based on real-world customer needs.</li>\n<li>Serve as a trusted advisor, elevating Synopsys’ reputation as a leader in simulation technology for the electronics industry.</li>\n<li>Empower customers to solve their most complex engineering problems, fostering long-term partnerships and loyalty.</li>\n<li>Contribute to thought leadership within the industry by sharing expertise at conferences, webinars, and training events.</li>\n<li>Drive internal knowledge sharing, mentoring junior team members, and promoting best practices across the organization.</li>\n</ul>\n<p><strong>What You’ll Need:</strong></p>\n<ul>\n<li>MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).</li>\n<li>Strong background in fluid mechanics and computational fluid dynamics (CFD) and thermodynamics with practical application in the electronics industry.</li>\n<li>Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.</li>\n<li>Experience integrating simulation solutions into customer design workflows at the package, board, and system level.</li>\n<li>Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.</li>\n<li>Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.</li>\n<li>Willingness and ability to travel domestically up to 25% (potentially up to 50%) as required.</li>\n</ul>\n<p><strong>Who You Are:</strong></p>\n<ul>\n<li>Logical problem-solver with strong interpersonal and communication skills, fluent in English (written and spoken).</li>\n<li>Highly organized, self-motivated, and able to manage multiple projects simultaneously with a sense of urgency.</li>\n<li>Business-savvy and professional, projecting confidence and credibility in all interactions.</li>\n<li>Collaborative team player who thrives in cross-functional environments and is willing to mentor others.</li>\n<li>Professional, driven to succeed, and results-focused, with a commitment to continuous improvement within a fast-paced, innovative company</li>\n</ul>\n<p><strong>The Team You’ll Be A Part Of:</strong></p>\n<p>You will join the Ansys Customer Excellence team, a diverse group of talented engineers and technical specialists dedicated to empowering customers and advancing simulation-driven innovation. The team emphasizes a collaborative culture, sharing expertise, continuously learning and delivering exceptional service across a wide range of industries, with a special focus on electronics thermal management. Together, you will solve complex challenges, drive product advancement, and make a measurable impact on the future of electronic design.</p>\n<p><strong>Rewards and Benefits:</strong></p>\n<p>We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. You</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_258b189a-627","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/san-jose/staff-application-engineer-electronics-thermal-management-northern-california-16451/44408/93198373600","x-work-arrangement":"onsite","x-experience-level":"staff","x-job-type":"employee","x-salary-range":"$112000-$168000","x-skills-required":["Ansys software","Fluid mechanics","Computational fluid dynamics","Thermodynamics","Mechanical engineering","Engineering simulation tools","CAE, CAD, EDA, or PLM tools"],"x-skills-preferred":["Multiphysics simulation approaches","Electro-Thermal","Thermo-Mechanical"],"datePosted":"2026-04-05T13:20:46.384Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"San Jose"}},"occupationalCategory":"Engineering","industry":"Technology","skills":"Ansys software, Fluid mechanics, Computational fluid dynamics, Thermodynamics, Mechanical engineering, Engineering simulation tools, CAE, CAD, EDA, or PLM tools, Multiphysics simulation approaches, Electro-Thermal, Thermo-Mechanical","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":112000,"maxValue":168000,"unitText":"YEAR"}}},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_50359ecc-208"},"title":"Validation / Verification Engineer, Staff Engineer (Meshing, Python, AI)","description":"<p><strong>Engineer the Future with Us</strong></p>\n<p>We are seeking a skilled Validation / Verification Engineer to join our team at Synopsys. As a Staff Engineer, you will be responsible for conducting rigorous testing of Ansys applications, including Meshing in Workbench, Fluent-Meshing, and meshing capabilities for the Python ecosystem.</p>\n<p><strong>What You&#39;ll Be Doing:</strong></p>\n<ul>\n<li>Conduct thorough testing of Ansys applications, including Meshing in Workbench, Fluent-Meshing, and meshing capabilities for the Python ecosystem.</li>\n<li>Analyze product requirements and develop comprehensive test plans for new features.</li>\n<li>Design, specify, and write new test cases; modify and update existing tests and maintain test scripts for automation and manual environments.</li>\n<li>Perform functional, application, regression, and performance testing in both manual and automated test environments.</li>\n<li>Lead testing initiatives by providing coverage analysis, testing metrics, and participating actively in defect management processes.</li>\n<li>Identify and investigate product defects, collaborating with developers to resolve issues efficiently.</li>\n<li>Operate across diverse computing environments, including Windows, Linux, virtual machines, compute clusters, and cloud infrastructure.</li>\n</ul>\n<p><strong>The Impact You Will Have:</strong></p>\n<ul>\n<li>Enhance product reliability and performance, directly influencing customer satisfaction and trust.</li>\n<li>Drive continuous improvement in testing methodologies, ensuring robust coverage and high-quality releases.</li>\n<li>Accelerate validation workflows through automation and advanced scripting, contributing to faster and more efficient development cycles.</li>\n<li>Facilitate seamless integration of new features by proactively identifying and resolving issues.</li>\n<li>Support Synopsys&#39; commitment to innovation by ensuring our products consistently meet industry-leading standards.</li>\n<li>Empower cross-functional teams with actionable insights from testing metrics and defect analysis.</li>\n<li>Champion the voice of the customer, ensuring that usability and functionality align with real-world needs.</li>\n</ul>\n<p><strong>What You&#39;ll Need:</strong></p>\n<ul>\n<li>Bachelor&#39;s degree in Mechanical, Civil, or Aerospace Engineering and 5 years related experience, or Master&#39;s degree with 3 years related experience.</li>\n<li>Expertise in meshing technologies for implicit and explicit finite element analysis (FEA) and/or Computational Fluid Dynamics (CFD).</li>\n<li>Advanced proficiency in programming and scripting languages, especially Python.</li>\n<li>Experience with software development, testing processes, and automation tools; proven use of GitHub Copilot to streamline test script development.</li>\n<li>Strong familiarity with Windows and Linux operating systems, including virtualized and cloud environments.</li>\n<li>Commercial experience with meshing and solver products (e.g., Workbench Meshing, Fluent-Meshing, Fluent, CFX, Ansys Mechanical, Ansys LS-Dyna) is highly desirable.</li>\n</ul>\n<p><strong>Who You Are:</strong></p>\n<ul>\n<li>Meticulous and thorough, with a keen eye for detail and a passion for quality assurance.</li>\n<li>Excellent communicator and collaborator, able to build strong relationships across teams and disciplines.</li>\n<li>Quick learner, adaptable, and able to thrive in dynamic, geographically distributed teams.</li>\n<li>Problem solver with strong planning skills and a proactive approach to overcoming challenges.</li>\n<li>Genuine enthusiasm for delivering high-quality, reliable software to customers.</li>\n</ul>\n<p><strong>The Team You&#39;ll Be A Part Of:</strong></p>\n<p>You will join the Meshing Development Unit (MDU), a dynamic team dedicated to advancing the application capabilities. The team focuses on developing and validating cutting-edge meshing technologies, collaborating closely with product creation, development, and support specialists. Together, you&#39;ll ensure the products meet the evolving needs of customers in engineering and simulation fields, driving innovation and excellence in software quality.</p>\n<p><strong>Rewards and Benefits:</strong></p>\n<p>We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.</p>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_50359ecc-208","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/pune/validation-verification-eng-staff-engineer-meshing-python-ai/44408/91911523936","x-work-arrangement":"onsite","x-experience-level":"staff","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["meshing technologies","implicit and explicit finite element analysis (FEA)","computational fluid dynamics (CFD)","python","software development","testing processes","automation tools","github copilot","windows","linux","virtualized and cloud environments","meshing and solver products"],"x-skills-preferred":["github copilot","windows","linux"],"datePosted":"2026-03-09T11:05:39.327Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Pune, Maharashtra, India"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"meshing technologies, implicit and explicit finite element analysis (FEA), computational fluid dynamics (CFD), python, software development, testing processes, automation tools, github copilot, windows, linux, virtualized and cloud environments, meshing and solver products, github copilot, windows, linux"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_e8c08044-f5d"},"title":"Aerodynamics Engineer","description":"<p>We&#39;re looking for an Aerodynamics Engineer to join our team. As an Aerodynamics Engineer, you will play a key role in the design and development of our Formula 1 cars. You will work closely with our experienced team of engineers to analyse and improve the aerodynamic performance of our cars.</p>\n<p>Responsibilities</p>\n<ul>\n<li>Analyse and improve the aerodynamic performance of our cars</li>\n<li>Design and develop new aerodynamic components</li>\n<li>Collaborate with our team of engineers to develop and implement aerodynamic strategies</li>\n<li>Conduct wind tunnel testing and analysis</li>\n<li>Develop and maintain computational fluid dynamics (CFD) models</li>\n<li>Work with our manufacturing team to ensure that aerodynamic components are manufactured to the required specifications</li>\n</ul>\n<p>Benefits</p>\n<ul>\n<li>Competitive salary and benefits package</li>\n<li>Opportunity to work on a high-profile Formula 1 team</li>\n<li>Collaborative and dynamic work environment</li>\n<li>Professional development and training opportunities</li>\n<li>Access to state-of-the-art facilities and equipment</li>\n<li>Flexible working hours and remote work options</li>\n</ul>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_e8c08044-f5d","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Atlassian Williams F1 Team","sameAs":"https://careers.williamsf1.com","logo":"https://logos.yubhub.co/careers.williamsf1.com.png"},"x-apply-url":"https://careers.williamsf1.com/job/senior-aerodynamicist-in-grove-wantage-jid-481","x-work-arrangement":"onsite","x-experience-level":"mid","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["Aerodynamics","Computational Fluid Dynamics (CFD)","Wind Tunnel Testing","Design and Development","Manufacturing"],"x-skills-preferred":["Programming languages such as Python or C++","Experience with CAD software such as CATIA or SolidWorks"],"datePosted":"2026-03-09T10:11:04.070Z","employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Motorsport","skills":"Aerodynamics, Computational Fluid Dynamics (CFD), Wind Tunnel Testing, Design and Development, Manufacturing, Programming languages such as Python or C++, Experience with CAD software such as CATIA or SolidWorks"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_6d066998-41e"},"title":"Design Engineer","description":"<p>We&#39;re looking for a talented Design Engineer to join our team. As a Design Engineer, you will work closely with our team of experts to design and develop innovative solutions for the Williams F1 Team.</p>\n<p><strong>Responsibilities</strong></p>\n<ul>\n<li>Design and develop innovative solutions for the Williams F1 Team</li>\n<li>Collaborate with our team of experts to ensure that designs meet the required specifications and standards</li>\n<li>Analyse data and results to identify areas for improvement and implement changes</li>\n<li>Work closely with the manufacturing team to ensure that designs are feasible and can be produced efficiently</li>\n<li>Develop and maintain technical documentation and reports</li>\n</ul>\n<p><strong>Requirements</strong></p>\n<ul>\n<li>Bachelor&#39;s degree in Mechanical Engineering or a related field</li>\n<li>2+ years of experience in design engineering</li>\n<li>Proficiency in CAD software such as SolidWorks or CATIA</li>\n<li>Experience with finite element analysis and computational fluid dynamics</li>\n<li>Strong understanding of mechanical systems and materials</li>\n<li>Excellent communication and teamwork skills</li>\n</ul>\n<p><strong>Benefits</strong></p>\n<ul>\n<li>Opportunity to work with a world-class team of engineers and technicians</li>\n<li>Collaborative and dynamic work environment</li>\n<li>Access to state-of-the-art equipment and technology</li>\n<li>Professional development and training opportunities</li>\n<li>Competitive salary and benefits package</li>\n</ul>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_6d066998-41e","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Atlassian Williams F1 Team","sameAs":"https://careers.williamsf1.com","logo":"https://logos.yubhub.co/careers.williamsf1.com.png"},"x-apply-url":"https://careers.williamsf1.com/job/communications-technician-in-grove-wantage-jid-492","x-work-arrangement":"onsite","x-experience-level":"mid","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["CAD software","finite element analysis","computational fluid dynamics","mechanical systems","materials"],"x-skills-preferred":["SolidWorks","CATIA"],"datePosted":"2026-03-09T10:08:23.617Z","employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Motorsport","skills":"CAD software, finite element analysis, computational fluid dynamics, mechanical systems, materials, SolidWorks, CATIA"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_77e46f62-8eb"},"title":"Aerodynamics Engineer","description":"<p><strong>Meet Eoghain McLaughlin working in Aerodynamics</strong></p>\n<p>3 Minute Mission \\| Eoghain McLaughlin - YouTube</p>\n<p>Photo image of Atlassian Williams F1 Team</p>\n<p>Atlassian Williams F1 Team</p>\n<p>577K subscribers</p>\n<p>3 Minute Mission \\| Eoghain McLaughlin</p>\n<p>Info</p>\n<p>Shopping</p>\n<p>Tap to unmute</p>\n<p>If playback doesn&#39;t begin shortly, try restarting your device.</p>\n<p>You&#39;re signed out</p>\n<p>Videos you watch may be added to the TV&#39;s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.</p>\n<p>CancelConfirm</p>\n<p>Include playlist</p>\n<p>An error occurred while retrieving sharing information. Please try again later.</p>\n<p>Watch later</p>\n<p>Watch on</p>\n<p>0:00</p>\n<p>/</p>\n<p>•Live</p>\n<p>•</p>\n<p>Privacy \\- Terms</p>\n<p>You are a curious human and I am an artificial intelligence assistant. I will help you understand the role of an Aerodynamics Engineer at Atlassian Williams F1 Team.</p>\n<p>As an Aerodynamics Engineer, you will work in a fast-paced environment to design and develop aerodynamic components for the team&#39;s Formula One cars. You will be responsible for analysing data and using computational tools to predict and optimise the aerodynamic performance of the car.</p>\n<p>Responsibilities:</p>\n<ul>\n<li>Design and develop aerodynamic components, including wings, diffusers, and other aerodynamic devices</li>\n<li>Analyse data from wind tunnel tests and computational simulations to predict and optimise aerodynamic performance</li>\n<li>Collaborate with other engineers and technicians to integrate aerodynamic components into the car</li>\n<li>Develop and maintain computational models and tools to support aerodynamic design and analysis</li>\n</ul>\n<p>Benefits:</p>\n<ul>\n<li>Opportunity to work on a high-performance team in the motorsport industry</li>\n<li>Collaborative and dynamic work environment</li>\n<li>Professional development and training opportunities</li>\n</ul>\n<p>Requirements:</p>\n<ul>\n<li>Bachelor&#39;s degree in Aerospace Engineering, Mechanical Engineering, or related field</li>\n<li>Experience with computational fluid dynamics (CFD) and computational models</li>\n<li>Strong analytical and problem-solving skills</li>\n<li>Excellent communication and collaboration skills</li>\n</ul>\n<p>Preferred Skills:</p>\n<ul>\n<li>Experience with wind tunnel testing and data analysis</li>\n<li>Knowledge of aerodynamic design principles and practices</li>\n<li>Familiarity with computational tools and software, such as ANSYS or OpenFOAM</li>\n</ul>\n<p>Salary Range: Not stated</p>\n<p>Category: Engineering</p>\n<p>Industry: Motorsport</p>\n<p>Experience Level: Mid</p>\n<p>Employment Type: Full-time</p>\n<p>Workplace Type: Onsite</p>\n<p>Skills:</p>\n<ul>\n<li>Computational fluid dynamics (CFD)</li>\n<li>Computational models</li>\n<li>Aerodynamic design</li>\n<li>Wind tunnel testing</li>\n<li>Data analysis</li>\n<li>Collaboration</li>\n<li>Communication</li>\n<li>Problem-solving</li>\n</ul>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_77e46f62-8eb","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Atlassian Williams F1 Team","sameAs":"https://careers.williamsf1.com","logo":"https://logos.yubhub.co/careers.williamsf1.com.png"},"x-apply-url":"https://careers.williamsf1.com/job/cad-systems-specialist-in-grove-wantage-jid-435","x-work-arrangement":"onsite","x-experience-level":"mid","x-job-type":"full-time","x-salary-range":null,"x-skills-required":["Computational fluid dynamics (CFD)","Computational models","Aerodynamic design","Wind tunnel testing","Data analysis","Collaboration","Communication","Problem-solving"],"x-skills-preferred":["Experience with wind tunnel testing and data analysis","Knowledge of aerodynamic design principles and practices","Familiarity with computational tools and software, such as ANSYS or OpenFOAM"],"datePosted":"2026-03-07T20:04:40.661Z","employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Motorsport","skills":"Computational fluid dynamics (CFD), Computational models, Aerodynamic design, Wind tunnel testing, Data analysis, Collaboration, Communication, Problem-solving, Experience with wind tunnel testing and data analysis, Knowledge of aerodynamic design principles and practices, Familiarity with computational tools and software, such as ANSYS or OpenFOAM"},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_355a2dc2-e94"},"title":"Applications Engineering, Staff Engineer - Fluids","description":"<p>We are seeking a highly skilled Applications Engineer to join our team. As a Staff Engineer, you will be responsible for leading the coordination and execution of all technical activities throughout the lifecycle of a sales opportunity. You will work independently, results-oriented, across teams and organizations.</p>\n<p><strong>What you&#39;ll do</strong></p>\n<ul>\n<li>Leads the coordination and execution of all technical activities throughout the lifecycle of a sales opportunity, including technical discovery, negotiation of technical success criteria, product presentations, demonstrations, and evaluations.</li>\n<li>Acts as a credible hands-on expert in the customer&#39;s application, working with customers to understand their product development requirements and identify opportunities to improve performance metrics.</li>\n<li>Supports the development of differentiating simulation solutions using the platform and our products; implements our solutions into customers&#39; design workflows.</li>\n<li>Collaborates with Product Development to translate customer requirements into new product features; participates in testing of new Ansys product releases and develops application best practices.</li>\n<li>Supports the Field and Digital Marketing teams by developing promotional materials, supporting events, and authoring conference presentations.</li>\n<li>Contributes to and leads professional service deliveries and conducts training classes.</li>\n</ul>\n<p><strong>What you need</strong></p>\n<ul>\n<li>Demonstrated experience in the use of Fluent or other commercial Computational Fluid Dynamics (CFD) software packages.</li>\n<li>Strong fundamentals and experience in modeling turbulence, multiphase flows, mass &amp; heat transfer phenomena.</li>\n<li>Demonstrated understanding of engineering practices and product development, experience with building solutions using simulation technology and deploying those solutions within customers&#39; engineering workflows.</li>\n<li>Logical problem-solving, strong interpersonal and communication skills, fluent in writing and speaking English.</li>\n<li>Strong organizational and time management skills, possesses a sense of urgency.</li>\n<li>Projects a professional image and demonstrates business acumen, driven to succeed.</li>\n</ul>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_355a2dc2-e94","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/evanston/applications-engineering-staff-engineer-fluids/44408/92312998176","x-work-arrangement":"onsite","x-experience-level":"staff","x-job-type":"employee","x-salary-range":"$112000-$168000","x-skills-required":["Computational Fluid Dynamics (CFD)","Fluent","Multiphase flows","Mass & heat transfer phenomena","Engineering practices and product development"],"x-skills-preferred":["Logical problem-solving","Strong interpersonal and communication skills","Fluent in writing and speaking English"],"datePosted":"2026-03-06T07:37:56.225Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Evanston, Illinois"}},"occupationalCategory":"Engineering","industry":"Technology","skills":"Computational Fluid Dynamics (CFD), Fluent, Multiphase flows, Mass & heat transfer phenomena, Engineering practices and product development, Logical problem-solving, Strong interpersonal and communication skills, Fluent in writing and speaking English","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":112000,"maxValue":168000,"unitText":"YEAR"}}},{"@context":"https://schema.org","@type":"JobPosting","identifier":{"@type":"PropertyValue","name":"YubHub","value":"job_8b0622ac-0ea"},"title":"Staff Application Engineer (Electronics Thermal Management)","description":"<p>Opening.</p>\n<p><strong>What you&#39;ll do</strong></p>\n<p>Our Hardware Engineers at Synopsys are responsible for designing and developing cutting-edge semiconductor solutions. They work on intricate tasks such as chip architecture, circuit design, and verification to ensure the efficiency and reliability of semiconductor products. These engineers play a crucial role in advancing technology and enabling innovations in various industries.</p>\n<p>Play Video![Hardware Engineering](https://tbcdn.talentbrew.com/company/44408/cms/img/ajd-overview-video-v2-m.webp)</p>\n<p><strong>Job Description</strong></p>\n<p><strong>Date posted</strong> 12/14/2025</p>\n<p><strong><strong>Category</strong> Engineering<strong>Hire Type</strong> Employee<strong>Job ID</strong> 13730<strong>Base Salary Range</strong> $112000-$168000<strong>Remote Eligible</strong> No<strong>Date Posted</strong> 12/14/2025</strong></p>\n<p><strong>What you&#39;ll do</strong></p>\n<ul>\n<li>Lead and coordinate all technical activities throughout the sales opportunity lifecycle, including technical discovery, product presentations, demonstrations, and evaluations.</li>\n<li>Engage directly with customers to understand their product design needs and engineering workflows, providing expert guidance on leveraging Ansys simulation solutions for electronics thermal management.</li>\n<li>Develop and deploy differentiating simulation solutions using the Ansys platform, integrating them seamlessly into customer design processes.</li>\n<li>Serve as a subject matter expert, deepening your industry knowledge and providing guidance to both customers and internal teams.</li>\n<li>Collaborate with product development teams to translate customer requirements into innovative product features and best practices</li>\n<li>Test rigorously new Ansys product releases on real-world industrial problems and contribute to the creation of application best practices.</li>\n<li>Support field and digital marketing initiatives, authoring conference presentations and technical content and thought leadership within the electronics thermal domain</li>\n<li>Provide consulting services and conduct training classes for customers, enabling them to maximize the value of Ansys solutions.</li>\n<li>Travel domestically to customer sites, conferences, and industry events to provide hands-on support and build lasting relationships (up to 25%, with flexibility for up to 50%).</li>\n</ul>\n<p><strong>What you need</strong></p>\n<ul>\n<li>MS in Mechanical Engineering or a related field (BS+5, MS+3, or PhD+0 years of experience in engineering software environments).</li>\n<li>Strong background in fluid mechanics and computational fluid dynamics (CFD)and thermodynamics with practical application in the electronics industry.</li>\n<li>Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools.</li>\n<li>Experience integrating simulation solutions into customer design workflows at the package, board, and system level.</li>\n<li>Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical) is highly desirable.</li>\n<li>Excellent interpersonal, verbal, and written communication skills and comfort with effective interaction with senior business managers and C-level executives.</li>\n<li>Willingness and ability to travel domestically up to 25% (potentially up to 50%).</li>\n</ul>\n<p style=\"margin-top:24px;font-size:13px;color:#666;\">XML job scraping automation by <a href=\"https://yubhub.co\">YubHub</a></p>","url":"https://yubhub.co/jobs/job_8b0622ac-0ea","directApply":true,"hiringOrganization":{"@type":"Organization","name":"Synopsys","sameAs":"https://careers.synopsys.com","logo":"https://logos.yubhub.co/careers.synopsys.com.png"},"x-apply-url":"https://careers.synopsys.com/job/irvine/staff-application-engineer-electronics-thermal-management-southern-california-13730/44408/89569494560","x-work-arrangement":"onsite","x-experience-level":"staff","x-job-type":"full-time","x-salary-range":"$112000-$168000","x-skills-required":["MS in Mechanical Engineering or a related field","Strong background in fluid mechanics and computational fluid dynamics (CFD)and thermodynamics with practical application in the electronics industry","Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools"],"x-skills-preferred":["Experience integrating simulation solutions into customer design workflows at the package, board, and system level","Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical)"],"datePosted":"2026-03-04T17:09:58.584Z","jobLocation":{"@type":"Place","address":{"@type":"PostalAddress","addressLocality":"Irvine, California, United States"}},"employmentType":"FULL_TIME","occupationalCategory":"Engineering","industry":"Technology","skills":"MS in Mechanical Engineering or a related field, Strong background in fluid mechanics and computational fluid dynamics (CFD)and thermodynamics with practical application in the electronics industry, Demonstrated proficiency with Ansys software (Fluent, Icepak, Mechanical) or similar CAE, CAD, EDA, or PLM tools, Experience integrating simulation solutions into customer design workflows at the package, board, and system level, Familiarity with Multiphysics simulation approaches (e.g., Electro-Thermal, Thermo-Mechanical)","baseSalary":{"@type":"MonetaryAmount","currency":"USD","value":{"@type":"QuantitativeValue","minValue":112000,"maxValue":168000,"unitText":"YEAR"}}}]}