You will gain insight into modern development processes for automotive control units and acquire hands-on experience in analysing, evaluating, and further developing hardware architectures, supporting tests of electronic prototypes, circuit and schematic design as well as layout of microcontrollers, power supplies, output stages, and CAN/Ethernet communication interfaces, using AI-based tools to automate review processes, and programming microcontrollers.

As a Working Student, you will be an enrolled student in Electrical Engineering, Mechatronics, or a comparable field of study, with a strong interest in hardware development and enthusiasm for e-mobility, solid knowledge of fundamental controls electronics and related components, team spirit, strong interpersonal skills, and intercultural openness, and good German and English language skills.

With mutual interest, there is the option to extend your collaboration through a thesis project.

XML job scraping automation by YubHub

This individual will be responsible for evaluating, benchmarking, and integrating cutting-edge navigation and sensor technologies across Saronic's fleet of autonomous vessels.

Key responsibilities include leading R&D initiatives, designing and executing benchmarking tests, performing trade studies, and developing system architectures.

The ideal candidate brings deep experience in electrical systems design, system-level trade studies, and technology evaluation, and thrives at the intersection of hardware innovation and applied research.

Responsibilities:

• Lead R&D initiatives focused on next-generation navigation and positioning solutions for autonomous vessels.

• Design and execute benchmarking tests of commercial and prototype systems (GNSS, INS/IMU, radar, LiDAR, Doppler velocity logs, etc.), including lab, dockside, and sea-trial environments.

• Perform trade studies and comparative analyses of current and emerging market offerings to inform system selection, integration paths, and performance improvements.

• Develop system architectures and interface specifications for integrating navigation sensors with vessel control, autonomy, and data processing subsystems.

• Prototype, test, and validate new electrical configurations supporting advanced sensing and positioning.

• Author technical reports and white papers summarizing benchmarking results, performance metrics, and recommendations.

• Collaborate with autonomy, software, and mechanical teams to ensure seamless sensor fusion and data pipeline integrity.

• Mentor junior engineers and contribute to internal R&D roadmaps for navigation system evolution.

• Contribute to IP generation, system qualification, and design standardization for future vessel platforms.

Required Qualifications:

• B.S. or M.S. in Electrical Engineering, Computer Engineering, or related discipline.

• 7+ years of professional experience in electrical systems engineering, preferably within marine, aerospace, automotive or defense domains.

• Demonstrated expertise with navigation and positioning systems: GNSS, INS/IMU, radar, LiDAR, or sensor fusion.

• Proven experience in system-level benchmarking, R&D experimentation, and trade study development.

• Strong understanding of signal integrity, timing synchronization, and sensor data acquisition.

• Proficiency with schematic and wiring design tools (e.g., Altium, AutoCAD Electrical, or SolidWorks Electrical).

• Experience with communication interfaces such as CAN, Ethernet, and serial protocols.

• Excellent technical writing and presentation skills , capable of producing concise, data-driven R&D documentation.

• Ability to operate effectively in both lab and field environments, including vessel trials.

Preferred Qualifications:

• Experience in autonomous or unmanned system development, particularly maritime platforms.

• Familiarity with sensor fusion algorithms and real-time data processing pipelines.

• Working knowledge of relevant industry standards (ABS, USCG, MIL-STD, IEC).

• Background in environmental testing, EMI/EMC compliance, and system reliability analysis.

• Experience supporting hardware-in-the-loop (HITL) or model-based system simulations.

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services

• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care

• Saronic pays 100% of the premium for employees and 80% for dependents

• Time Off: Generous PTO and Holidays

• Parental Leave: Paid maternity and paternity leave to support new parents

• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses

• Retirement Plan: 401(k) plan

• Stock Options: Equity options to give employees a stake in the company’s success

• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

Physical Demands:

• Prolonged periods of sitting at a desk and working on a computer.

• Occasional standing and walking within the office.

• Manual dexterity to operate a computer keyboard, mouse, and other office equipment.

• Visual acuity to read screens, documents, and reports.

• Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.

• Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages).

Additional Information:

This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

XML job scraping automation by YubHub

Responsibilities:

• Design, prototype, build and test high-voltage battery management electronics for Fuse Energy’s stationary storage and grid-connected systems
• Own end-to-end PCBA development, including requirements definition, schematic capture, PCB layout, design reviews and design for manufacturability
• Develop automated validation setups and test firmware/software to ensure comprehensive functional, performance and safety coverage of BMS designs
• Support the transition of designs from prototype to production, including supplier engagement, bring-up and production test strategy
• Collaborate with firmware and software engineers to define hardware–software interfaces, diagnostics and safety mechanisms
• Work closely with mechanical and systems engineers to ensure electrical designs are optimised for thermal performance, isolation and environmental constraints
• Perform detailed failure analysis and root-cause investigations on PCBAs and systems in both lab and field environments
• Evaluate, select and integrate battery monitoring ICs, microcontrollers, isolation components and communication interfaces suitable for high-voltage applications
• Continuously improve designs to optimise reliability, component availability and BOM cost as systems scale

Requirements:

• Bachelor’s degree in Electrical or Electronic Engineering or equivalent practical experience
• At least 5 years of hands-on industry experience in analog and digital electronics design
• Strong fundamentals in circuit analysis, simulation and design trade-off evaluation
• Proven experience designing and debugging complex PCBAs with excellent failure analysis and troubleshooting skills
• Solid proficiency in Python for test automation, validation and data analysis
• Experience in one or more of the following domains: battery management systems, power electronics, high-voltage systems, microcontrollers or high-speed digital interfaces
• Familiarity with communication interfaces commonly used in BMS and energy systems (e.g. CAN, RS485, Ethernet, SPI, I²C)
• Experience with Altium Designer and circuit simulation tools such as LTSpice
• Exposure to mechanical CAD tools (e.g. Fusion 360, SolidWorks or similar), rapid prototyping and close collaboration with mechanical design

Benefits:

• Competitive salary and an equity sign-on bonus
• Biannual bonus scheme
• Fully expensed tech to match your needs
• Paid annual leave
• Breakfast and dinner allowance for office based employees

XML job scraping automation by YubHub

Collaborate to define product goals Conceive, design, evaluate, and produce novel gaming hardware Work closely with contract manufacturers to prototype and produce hardware at scales from tens to millions of units

Electrical engineers at Valve have significant industry experience. We usually don’t hire recent graduates.

Members of our team typically have the following skills:

Proven start-to-finish design skills with industry-standard CAD/EDA tools (Altium Designer experience strongly preferred), including schematic entry, PCB layout, component definition, and CAD library management Hands-on electronics prototyping experience, including soldering and rework of fine-pitch SMT components Strong lab skills, including the use of common test and measurement equipment (oscilloscopes, logic analyzers, etc.) to debug and characterize complex electronic circuits Experience with embedded systems design and common digital communication interfaces (USB, SPI, I2C) Experience working directly on-site with manufacturing partners A proven track record of designing and shipping high-volume consumer electronics products Experience in design for manufacture and design for test (DFM/DFT) of electronic devices Ability to think and work across a variety of subject areas

Bachelor's degree (or equivalent work experience) in electrical engineering or a related field

Our team includes individuals with expertise in the following areas:

Analog circuit design and simulation (e.g. SPICE) Low-power design, including battery management and charging circuits for portable devices RF/wireless circuit design, including design of antennas and for EMC Firmware development for 8, 16, 32-bit microcontrollers (e.g. ARM) High speed/HDI board design Digital Signal Processing (DSP) High speed video interfaces (HDMI, Display Port, LVDS, MIPI) Regulatory compliance testing (e.g. FCC/CE/UL) C/C++ software development Test automation FPGA/ASIC design

What We Offer

An organization where 100% of time is dedicated as groups see fit The opportunity to collaborate with experts across a range of disciplines A work environment and flexible schedule in support of families and domestic partnerships A culture eager to become stronger through diversity of all forms Exceptional health insurance coverage Unrivaled employer match for our 401(k) retirement plan Generous vacation and family leave On-site amenities in support of health and efficiency Fertility and adoption assistance Reimbursement for child care during interviews

Valve strives to improve the diversity of our teams to better serve our diverse global audience. We welcome and encourage individuals from all backgrounds to apply.

XML job scraping automation by YubHub

What you'll do

• Conducting comprehensive testing on silicon implementations of high-speed analog integrated circuits in a cutting-edge R&D lab environment.
• Reviewing and debugging silicon under test, as well as supporting associated hardware systems to ensure optimal performance.

What you need

• Bachelor’s degree in Electrical Engineering (BSEE) or equivalent technical field with at least 3+ years of industry direct related experience.

XML job scraping automation by YubHub

What you'll do

In this role, you will be responsible for developing, implementing, and optimising embedded software in C/C++. You will also configure and work with an RTOS environment (e.g., Zephyr, FreeRTOS), implement and maintain communication interfaces such as SPI, I2C, CAN and USB, and support firmware–hardware integration in collaboration with hardware engineering teams.

What you need

To be successful in this role, you will need a Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field, or equivalent practical experience. You will also need 3+ years of experience in embedded software development, a solid understanding of embedded system fundamentals, including memory management, real-time considerations, and hardware interaction, and proficiency in C/C++ and familiarity with modern embedded development practices.

XML job scraping automation by YubHub