Key responsibilities include:

• Working with a cross-functional team to design market-leading hardware products.
• Full cycle PCB design, including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug, and integration with the system.
• Driving product maturity through rapid prototyping, design verification, and qualification activities.
• Applying modern design standards and guidelines to create high-reliability, highly manufacturable assemblies.
• Implementing combinations of high-speed digital, precision analog, RF, and high-power designs.
• Leading the team in establishing internal guidelines for design for manufacturing (DFM) and quality fabrication and assembly outputs.
• Conducting peer-level and cross-discipline design reviews.
• Low-level firmware development for bring-up and test.
• Root cause analysis in support of production operations.

Requirements include:

• 4+ years of professional experience in hardware product development.
• Full understanding of PCB Layout techniques to meet mechanical, electrical, and manufacturing requirements.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Ability to determine work priorities based on broad direction from management.
• Experience using Altium Designer or equivalent E-CAD tools.
• Excellent communication skills and ability to work effectively with others.
• Ability to work within our company and team culture.
• Must have an active U.S. Secret security clearance.

XML job scraping automation by YubHub

The Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. The Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS).

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design.

Key Responsibilities:

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands-on and in-field support of prototype and production-level product.
• Collaborate with mechanical engineers to optimize selection, design, and integration of high-power components, modules, and distribution.
• Trade-off component and module selections against size, weight, power, and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

Requirements:

• Minimum 5 years of professional experience.
• Self-starter with the ability to design digital & analog electronics from concept and functional prototype, to production-ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full-cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer-operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred Qualifications:

• Bachelor's Degree in Electrical Engineering or equivalent.
• 5+ years of experience designing, testing, and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch-mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.).
• Ability to root-cause full-stack HLOS application to hardware component-level issues.

XML job scraping automation by YubHub

Key Responsibilities:

• Hands-on Engineering: Actively participate in the design, testing, and troubleshooting of circuits, PCB layouts, and other electronic systems.
• Collaboration: Work closely with cross-functional teams, including software, firmware, and mechanical engineers, to ensure seamless integration of electrical systems.
• Mentorship: Provide technical guidance and mentorship to junior engineers, helping to develop the team's capabilities.
• System Testing and Validation: Oversee system-level testing and validation to ensure designs meet performance, safety, and reliability standards.
• Vendor Coordination: Interface with vendors to source and select appropriate components for designs, ensuring quality and timely delivery.
• Project Management: Support project timelines and ensure that technical milestones are met, reporting on progress to senior management.

Requirements:

• Experience: 5+ years of experience in electrical engineering, with a focus on avionics, UAV systems, or similar industries.
• Technical Expertise: Strong hands-on knowledge of analog and digital circuit design, PCB design, and avionics systems.
• Project Management: Ability to oversee the technical aspects of projects from concept to delivery, ensuring that deadlines and specifications are met.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred Qualifications:

• Familiarity with avionics design standards like DO-254, MIL-STD-810, and others.
• Proficiency with Altium Designer or equivalent PCB design tools.
• Strong problem-solving skills with a focus on delivering innovative solutions.

XML job scraping automation by YubHub

In this role, you will work closely with an interdisciplinary technical team to route high-speed mixed-signal designs, interact with fabricators and assemblers, and manage signal integrity in complex PCBs.

Key responsibilities include:

• Working directly with engineers to produce printed circuit board designs supporting Anduril's products.
• Applying modern design standards and guidelines to create high-reliability, highly manufacturable assemblies.
• Implementing combinations of high-speed digital, precision analog, RF, and high-power designs.
• Leading the team in establishing internal guidelines for design for manufacturing (DFM), design for assembly (DFA), and overall quality fabrication and assembly outputs.
• Developing and refining team processes for PCB design, part creation, and library/database standards.
• Coordinating external PCB design resources during design surges.

Required qualifications include:

• A bachelor's degree in electrical engineering or similar and 5+ years of professional experience in PCB design OR 10+ years of professional experience in PCB design.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Expertise in applying relevant IPC standards, CID, CID+ certification.
• Expertise in PCB fabrication processes, limitations, design rules, and best practice.
• Experience using Altium Designer CAD tools (Allegro is a plus).
• Experience with developing component libraries and library management.
• Excellent communication skills with multiple fab houses (ensuring boards are built to print).
• Excellent communication skills with multiple assembly houses (ensuring boards are built to BOM).
• Experience with a variety of board types, including high density and high layer count (greater than 16) digital designs, power electronics, flex circuits, and RF circuits.
• Experience with HDI (high density interconnect) and thicker boards (greater than 1.6mm).
• Experience with high speed digital interfaces and controlled impedance routing requirements like USB, PCIe, Ethernet, SERDES, and DDR memory.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred qualifications include:

• Familiarity with RF board design.
• Experience with high-pin count packages (FPGA fanout).
• Familiarity with basic signal and power integrity rules (how they affect layout).

US Salary Range $111,000-$147,000 USD

XML job scraping automation by YubHub

You will collaborate cross-functionally with other electrical, firmware/software, mechanical, and manufacturing/quality teams to design, validate, and deliver robust electronic solutions.

Key Responsibilities:

• Primarily digital and power-based designs, but analog design is a possibility.
• Own the entire PCB design lifecycle, including requirements, major component selection, block diagrams, schematic, circuit analysis, placement, routing, DFA/DFM review, prototype testing, and documentation.
• Create and maintain BOMs, design files, netlists, and manufacturing documentation.
• Work closely with mechanical engineers to integrate PCBs into enclosures and assemblies.
• Lead or support prototype bring-up, debugging, and testing with support from the firmware/software teams (Capability to write firmware/software for bring-up is a plus).
• Perform signal integrity, power budgeting, and thermal analysis as needed.
• Review and optimize designs for EMC/EMI compliance and environmental robustness.
• Interface with fabrication and assembly vendors, addressing build issues and driving quality improvements.
• Participate and cross-collaborate in design reviews and peer reviews to ensure high standards.
• Contribute to and improve engineering processes, libraries, and design guidelines.
• Support ITAR/export compliance and follow relevant standards such as MIL-STD’s, IPC-610/6012, etc.

Required Qualifications:

• Bachelor’s degree in Electrical Engineering or related field.
• 3+ years of professional experience in PCB schematic and layout design.
• Proficiency with Altium Designer (or other equivalent EDA tools).
• Experience with multi-layer board design and high-speed or mixed-signal circuitry.
• Strong understanding of electronic components, circuit theory, and board-level design principles.
• Ability to interpret datasheets, standards, and mechanical constraints.
• Proven experience with design for manufacturing (DFM) and design for test (DFT).

Preferred Qualifications:

• Experience in defense, aerospace, or other safety/mission-critical industries.
• Familiarity with ruggedized systems, high-temperature settings, water-intrusion protection, and other environmental requirements.
• Knowledge of MIL-STD, IPC standards, or similar frameworks.
• Experience with SPICE simulations, Signal Integrity Analysis, or reliability engineering.
• Ability to work with firmware, FPGA, or embedded teams.
• Active or previous security clearance (or ability to obtain one).
• Ownership mentality and attention to detail.
• Ability to work both independently and in multidisciplinary teams.
• Strong organizational and time management skills.
• Comfortable working in a fast-paced, product-focused environment.

Benefits:

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 100% of the premium for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan
• Stock Options: Equity options to give employees a stake in the company’s success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

Physical Demands:

• Prolonged periods of sitting at a desk and working on a computer.
• Occasional standing and walking within the office.
• Manual dexterity to operate a computer keyboard, mouse, and other office equipment.
• Visual acuity to read screens, documents, and reports.
• Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies.
• Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages).

Additional Information:

This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

XML job scraping automation by YubHub

Responsibilities:

• Design, prototype, build and test high-voltage battery management electronics for Fuse Energy’s stationary storage and grid-connected systems
• Own end-to-end PCBA development, including requirements definition, schematic capture, PCB layout, design reviews and design for manufacturability
• Develop automated validation setups and test firmware/software to ensure comprehensive functional, performance and safety coverage of BMS designs
• Support the transition of designs from prototype to production, including supplier engagement, bring-up and production test strategy
• Collaborate with firmware and software engineers to define hardware–software interfaces, diagnostics and safety mechanisms
• Work closely with mechanical and systems engineers to ensure electrical designs are optimised for thermal performance, isolation and environmental constraints
• Perform detailed failure analysis and root-cause investigations on PCBAs and systems in both lab and field environments
• Evaluate, select and integrate battery monitoring ICs, microcontrollers, isolation components and communication interfaces suitable for high-voltage applications
• Continuously improve designs to optimise reliability, component availability and BOM cost as systems scale

Requirements:

• Bachelor’s degree in Electrical or Electronic Engineering or equivalent practical experience
• At least 5 years of hands-on industry experience in analog and digital electronics design
• Strong fundamentals in circuit analysis, simulation and design trade-off evaluation
• Proven experience designing and debugging complex PCBAs with excellent failure analysis and troubleshooting skills
• Solid proficiency in Python for test automation, validation and data analysis
• Experience in one or more of the following domains: battery management systems, power electronics, high-voltage systems, microcontrollers or high-speed digital interfaces
• Familiarity with communication interfaces commonly used in BMS and energy systems (e.g. CAN, RS485, Ethernet, SPI, I²C)
• Experience with Altium Designer and circuit simulation tools such as LTSpice
• Exposure to mechanical CAD tools (e.g. Fusion 360, SolidWorks or similar), rapid prototyping and close collaboration with mechanical design

Benefits:

• Competitive salary and an equity sign-on bonus
• Biannual bonus scheme
• Fully expensed tech to match your needs
• Paid annual leave
• Breakfast and dinner allowance for office based employees

XML job scraping automation by YubHub

You'll work with our product owners to define features and requirements, produce system-level designs including selection of key technologies and components, then go on to design the schematics and PCBs.

You'll be responsible for planning your work and delivering against production schedules - this means strong analytical and estimation skills, and the ability to communicate effectively with technical and non-technical peers.

You'll spend a lot of your time designing and debugging hardware, so systematic measurement, analysis and fault-finding skills are essential.

Signal integrity, EMC and analogue debugging experience are also highly desirable.

You'll contribute to our roadmaps, helping determine what products we deliver and how we deliver them - this means seeing the big-picture and understanding our products, market and customers.

You'll be working with a team of experienced engineers who are on hand to support you in a friendly, social and inclusive environment where our shared passion for music and music tech is front and centre.

About you:

You bring energy, technical acumen, and a proven track record.

You've been responsible for delivering successful products to market in music tech, consumer electronics or a similar industry.

You're a proactive and pragmatic problem solver, able to find creative solutions to problems that others didn't see coming.

You're decisive, you back yourself, and you're able to bring others along with you.

You build strong working relationships with your peers; you support and mentor others and know when to seek support yourself.

You think strategically and can work across multiple projects while still diving down into detail.

Most importantly of all, you love what you do - designing and shipping products that help millions of people make music.

Required skills and experience – you should apply for this role if you have:

• A degree or HND in Electronics Engineering (or related subject).

• Taken ownership of commercial designs throughout the full development process and delivered them successfully.

• Experience of designing hardware that balances quality, cost and time to market.

• The ability to plan and deliver to deadlines, learning and applying new skills quickly.

Technical knowledge we're looking for:

• Analogue electronics for audio applications (low-noise design, signal processing).

• High speed digital interfaces (e.g. SDRAM, I2S, USB, RGMII).

• Linear and switching power supply design, PMICs, USB PD.

• Embedded systems.

Further desirable experience:

• Design of products for high-volume mass production.

• Design and debug for EMCD and RED approvals.

• An active interest in making music and music technology.

• Working with ODM/JDM/CDS models.

• Altium Designer (schematic and PCB layout)

XML job scraping automation by YubHub

Responsibilities

• Design next-generation automotive ECUs, inverters, and BMS, including schematic, simulation, thermal analysis, PCB layout, circuit tolerance, worst-case analysis, and signal integrity analysis.
• Design analog circuits using op-amps, logic gates, analog/digital sensors, signal isolators, transceivers, MCUs, and PMICs.
• Design switch mode power supplies (Buck, Boost, SEPIC, Flyback, etc.).
• Define hardware-software and communication interfaces (CAN, LIN, etc.), specifying component sourcing activities.
• Support lab tests, debug, and validation activities.
• Support project and quality management activities.

Requirements

• Bachelor's degree in Electrical/Electronics, Mechatronics Engineering.
• Minimum 2 years of experience in related areas.
• Experience with analog and digital hardware design.
• Experience with analog circuit simulation and analysis using LTspice or similar SPICE software.
• Experience with Altium Designer or similar PCB design software.
• Experience with lab equipment and testing.
• Fluent speaking and excellent writing skills in English.

Benefits

• Competitive salary and benefits package.
• Opportunity to work with a leading mobility technology company.
• Collaborative and dynamic work environment.
• Professional development and growth opportunities.

XML job scraping automation by YubHub

What we’re looking for:

We are seeking a highly skilled and motivated individual to join our Technical Department – R&D team in Pisa, Italy. The successful candidate will be responsible for designing and developing electrical circuits and systems for our high-performance vehicles.

Requirements:

• Diploma in Elettronica o in Telecomunicazioni
• Buona conoscenza dei linguaggi di programmazione: C, C++
• Buona conoscenza di almeno uno dei principali strumenti di design, tra cui Altium Designer e Kicad
• Buona capacità di lettura schemi elettrici
• Buona conoscenza strumentazioni di analisi, come Oscilloscopio e Multimetro.
• Richiesta buona manualità
• Buona conoscenza della lingua inglese (livello B1) ed italiana (B2).
• Disponibilità a trasferte lavorative, sia in Italia che all’estero.

Responsabilità:

• Realizzazione di schemi elettrici e sbroglio per attività di test
• Esecuzione delle attività di test e di debug dei prodotti
• Definizione e test Cablaggi
• Installazione e assistenza sul campo in occasione degli eventi di campionati automobilistici internazionali, tra cui Campionato del Mondo Rally, Formula E

Benefits

• Competitive salary and benefits package
• Opportunity to work on high-profile projects
• Collaborative and dynamic work environment
• Professional development and training opportunities

How to Apply

If you are a motivated and experienced individual looking for a new challenge, please submit your application, including your CV and a cover letter, to [insert contact email or link to application portal].

XML job scraping automation by YubHub