The role focuses on reliable process execution, accurate documentation, basic troubleshooting, and learning through on-the-job training. You will spend most time on the shop floor executing assigned tasks under supervision while learning and applying cGMP, quality and SHE requirements.

Core responsibilities include equipment setup/takedown, cleaning, routine maintenance, completing electronic and paper records (MES), escalating deviations, supporting area ownership and participating in basic continuous improvement activities.

Technical Skills:

• Demonstrates foundational understanding of SOPs, process flows and critical operational parameters;
• Recognises upstream/downstream dependencies and impacts;
• Executes routine production tasks (solution prep, basic cell culture/support tasks, formulation and housekeeping) per SOPs, MPRs and SPRs;
• Completes accurate records in MES to ensure traceability;
• Supports setup, takedown, cleaning and routine maintenance of equipment under supervision;
• Follows qualification requirements and escalation pathways;
• Learns and follows GMP, Quality and SHE protocols;
• Identifies and reports unsafe conditions and quality deviations;
• Participates in safety/investigation activities as required;
• Supports designated area ownership standards and basic lean practices to maintain a safe, orderly work area and improve local efficiency.

Business Skills:

• Uses available data and MES outputs to complete assigned work;
• Records observations and flags anomalies for review;
• Embraces and learns digital tools used in the area;
• Participates in digital adoption and training activities;
• Manages and prioritises assigned daily tasks with supervision;
• Completes work on time with attention to detail and communicates status proactively.

People Skills:

• Communicates clearly and concisely with peers and Managers;
• Shares updates and escalations in a timely manner;
• Demonstrates a positive, 'can do' attitude;
• Accepts feedback and applies coaching to improve performance;
• Takes responsibility for completing assigned tasks, follows instructions, and complies with Company values and safety requirements.

Additional Responsibilities and Accountabilities:

• Participate in initial qualification and on-the-job training programs;
• Support area housekeeping and DAO standards;
• Other duties as assigned;
• Conduct activities and interactions consistent with Company values and in compliance with the Code of Conduct and supporting Policies and Standards relevant to your role.

Essential Skills/Experience:

• Production Tech I - 0-1 years experience with High School Diploma or GED;
• Ability to work independently or in collaboration with others on assigned tasks;
• Ability to comply with cGMP standards;
• Must possess computer skills;
• Ability to follow instruction and directions.

Desirable Skills/Experience:

• BS/BA degree preferred;
• Degree in STEM field;
• Prior experience or exposure with aseptic/cGMP standards and environment.

XML job scraping automation by YubHub

Responsibilities:

• Perform tasks in a manner consistent with safety policies, quality systems, and cGMP requirements.
• Assist in the development of Standard Operating Procedures (SOPs) for manufacturing processes.
• Assist in setting up manufacturing areas and equipment, including complex automated cell processing equipment.
• Follow all cleaning and gowning procedures for the facility.
• Maintain appropriate inventories of material and supplies within the cleanroom areas to support manufacturing activities.
• Ensure all materials and equipment are identified and available in time for manufacturing activities.
• Support Process Development and MSAT to align manufacturing plans with overall product development plans.
• Ensure that all production operations are controlled and executed within cGMP regulatory guidelines.
• Provide timely verbal and written updates to Manufacturing leadership.
• Support all new product/process introductions on site.
• Interact with vendors and outside resources.
• Complete assigned projects.
• Be the shift lead if required, providing instruction to the team.
• Troubleshoot and resolve operational problems during processing.
• Represent Manufacturing in cross-functional initiatives and meetings.
• Monitor and evaluate process trends and recommend and implement continuous improvement strategies as appropriate.
• Manage multiple projects independently.
• Plan and implement complex changes.
• Perform Environmental monitoring as required.
• Technical expert for entire area(s).
• Interact independently with regulatory agencies.
• Develop and provide training on complex manufacturing processes.
• Perform Manufacturing review and approval of critical documents.
• Develop process validation protocols.
• Maintain good housekeeping and clean and sanitize classified areas as required.
• Analyze complex problems and determine and implement solutions.
• Other duties and projects assigned to meet business needs.

XML job scraping automation by YubHub

Key responsibilities include:

• Foundational Learning: Work across various departments to build a foundational knowledge of the row crop business.
• Operational monitoring: Help coordinate daily tasks, such as creating work plans, monitoring production schedules, and ensuring that Standard Operating Procedures (SOPs) are followed.
• Supports squads to enable the production of the highest quality product in accordance with all forecasted demand needs.
• Equipment and technology: Learn to operate, maintain, and repair modern agricultural and manufacturing equipment, production tools, and data management software.
• System optimization: Identify opportunities to improve processes and increase efficiency, working toward the company's overall performance goals while keeping an agile mindset.
• Data analysis: Assist in collecting production data to maintain accurate service logs and environmental data.

As a Row Crop Production Trainee, you will have the opportunity to learn from experienced professionals and develop the skills and knowledge necessary to succeed in a dynamic and fast-paced environment.

If you're looking for a challenging and rewarding career in agriculture, we encourage you to apply for this exciting opportunity.

XML job scraping automation by YubHub

We offer on the job training to start you on your journey with Bayer! Our benefits include 120 hours of vacation, 128 hours of holiday time, 40 hours sick time, full medical/dental/vision, educational assistance, annual bonus, and more! Pay is $17.50 per hour, with up to a 5% yearly bonus.

If you're hungry to build a varied and meaningful career in a community of brilliant and diverse minds to make a real difference, there's only one choice. Join us at Bayer!

XML job scraping automation by YubHub

As a Manager, you will be responsible for providing direction to subordinates, administering policies and procedures, making routine decisions, and planning and supervising daily activities. You will also be expected to coach, counsel, train, and discipline staff, ensuring performance of all process steps specific to the phase or stage of operation. Your role will also involve generating SOPs, MPRs, and SPRs for equipment and procedures used in routine biologics manufacture.

Essential Skills/Experience:

• 7-10 years work experience in pilot or commercial biologics manufacturing under cGMP with Bachelors.
• 5-7 years experience with Masters degree.
• 10-15 years experience with Associates Degree and 15+ years experience with High School education.
• BS/BA degree preferred in biological sciences or biotechnology/life sciences.
• Masters degree accepted.

Desirable Skills/Experience:

• BS/BA degree in biological sciences or biotechnology/life sciences.
• Masters degree accepted.
• Associates and High School Diploma acceptable with appropriate experience

At AstraZeneca, we are committed to leading the way in Operations. We are pioneers in our field, constantly evolving and growing. We believe in empowering our teams to foster a Lean mindset and sustainable practices. We value diversity and cross-functional working practices, providing the guidance needed to overcome any obstacles.

The annual base pay for this position ranges from $94,692- $142,039. Hourly and salaried non-exempt employees will also be paid overtime pay when working qualifying overtime hours. Base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience.

XML job scraping automation by YubHub

As a Production Technician I at AstraZeneca, you will have the opportunity to play a pivotal role in evolving our Supply Chain. You will be operating upstream / downstream / central services processing equipment according to established SOPs. This is your chance to be part of a team that's reimagining how we do things and creating a collective legacy.

In this role, you will be responsible for the operation of processing equipment according to established SOPs, MPRs, & SPRs in accordance with cGMPs. Your duties will include solution preparation, cell culture, purification & formulation, and supporting activities. You will also train with a qualified Technician on activities related to operating process equipment with the requirement of qualification. Additionally, you will follow and execute cGMP documentation, utilize Manufacturing Execution systems (MES), contribute to problem-solving activities for non-routine activities on the production floor, and participate in continuous improvement activities for Manufacturing.

Adherence to AstraZeneca values and behaviours is expected.

Essential Skills/Experience:

• Production Tech I - 0-1 years experience with High School Diploma
• Ability to work independently or in collaboration with others on assigned tasks
• Ability to comply with cGMP standards
• Must possess computer skills
• Ability to follow instruction and directions

Desirable Skills/Experience:

• BS/BA degree preferred
• Degree in STEM field
• Prior experience or exposure with aseptic/cGMP standards and environment

XML job scraping automation by YubHub

If you're looking for a rewarding and meaningful career where you can make a real difference with other brilliant minds, we want you to join our team.

As an Anlagenbediener*in (all genders), you'll play a central role in ensuring the smooth operation of our packaging lines. You'll operate modern machinery, ensure the quality of our products, and contribute to achieving our corporate goals.

Your tasks will include operating the machines, carefully documenting and controlling all production steps, and cleaning and maintaining the equipment according to our quality standards. With your willingness to work shifts and your commitment to continuous improvement, you'll be a valuable part of our team.

Responsibilities and Accountabilities

• Operate packaging lines and specific inspection systems, and perform all activities required for the proper operation of the packaging line.
• Ensure proper management and control of charge documentation and logbooks, and perform and document in-process controls during ongoing production processes.
• Perform and control equipment, format part, and room cleanings according to standard operating procedures, and manage related documentation (eCR, charge protocol, and logbook).
• Implement partial disassembly of equipment and equipment parts, and work on machine and equipment installation.
• Ensure cooperative, responsible, and continuous participation in product quality assurance.
• Ensure efficient utilization of equipment, taking into account costs and benefits.
• Participate actively in achieving departmental goals and engage in constructive and goal-oriented collaboration within the Packaging Department.

What You Bring

• Completed 2-year vocational training, preferably with a technical or pharmaceutical background.
• Experience in operating production equipment is a significant asset.
• Good PC skills, including software used in process control technology.
• Strong understanding of complex processes, responsible, and forward-thinking working style.
• Ability to engage in constructive and goal-oriented collaboration within the Packaging Department.
• High level of reliability and self-motivation, good communication skills, and enjoyment of teamwork.
• Willingness to undergo on-the-job training and work in 3-shift operations.
• Excellent German language skills, both written and spoken.

The position is limited to two years, with the possibility of indefinite extension.

What We Offer

Our performance package is flexible, respectful, and tailored to your lifestyle, because:

• Your financial stability is secured through a competitive remuneration package, including a monthly salary, annual bonus, holiday pay, and Christmas bonus/13th month salary.
• We promote your development through access to learning opportunities such as LinkedIn Learning and our language learning platform Education First.
• We strive to support your health and well-being.
• We confirm sustainable mobility through climate-friendly mobility options such as job tickets and bike sharing.
• You enjoy exciting benefits and access to discounts from over 150 brands through our Corporate Benefits Program.
• We celebrate diversity in an inclusive work environment where you feel welcome, supported, and encouraged to bring your whole personality.

Be You. Be Bayer.

#LI-AMSEMEA

Application

This is your chance to join us in tackling the world's greatest global challenges: preserving human health, feeding a growing population, and slowing down climate change. You have a voice, ideas, and perspectives that we want to hear. Because our success begins with you. Be part of it. Be Bayer.

Bayer welcomes applications from all people regardless of ethnic origin, nationality, gender, age, physical characteristics, social background, disability, membership in a trade union, religion, marital status, pregnancy, sexual orientation, gender identity, or any other irrelevant criterion under applicable law. We commit to treating all applicants fairly and avoiding discrimination.

XML job scraping automation by YubHub

As a Production Technician I at AstraZeneca, you will have the opportunity to play a pivotal role in evolving our Supply Chain. You will be operating upstream / downstream / central services processing equipment according to established SOPs. This is your chance to be part of a team that's reimagining how we do things and creating a collective legacy.

In this role, you will be responsible for the operation of processing equipment according to established SOPs, MPRs, & SPRs in accordance with cGMPs. Your duties will include solution preparation, cell culture, purification & formulation, and supporting activities. You will also train with a qualified Technician on activities related to operating process equipment with the requirement of qualification. Additionally, you will follow and execute cGMP documentation, utilize Manufacturing Execution systems (MES), contribute to problem-solving activities for non-routine activities on the production floor, and participate in continuous improvement activities for Manufacturing.

Adherence to AstraZeneca values and behaviours is expected.

Essential Skills/Experience: Production Tech I - 0-1 yrs experience with High School Diploma - Ability to work independently or in collaboration with others on assigned tasks - Ability to comply with cGMP standards - Must possess computer skills - Ability to follow instruction and directions

Production Tech II - 0-1 years experience with Bachelors, >1 year with Associates, >2 years with High School Diploma - Ability to work independently or in collaboration with others on assigned tasks - Ability to follow cGMP standards - Must possess computer skills - Ability to follow instruction and directions - Prior experience with aseptic/cGMP standards -Prior experience in Bioprocessing work environment/systems/equipment operation

Production Tech III -1-2 years experience with Bachelors, >2 year with Associates, >3 years with High School Diploma - Ability to work independently or in collaboration with others on assigned tasks - Ability to follow cGMP standards - Possess computer skills - Ability to follow instruction and directions - Ability to perform job responsibilities with minimal oversight - Prior experience with aseptic/cGMP standards - Advanced prior experience in Bioprocessing work environment/systems/equipment operation

Desirable Skills/Experience: BS/BA degree preferred Degree in STEM field Prior experience or exposure with aseptic/cGMP standards and environment

At AstraZeneca, we are driven by the challenge to stay ahead in rapidly changing markets. We continuously seek new and better ways to deliver medicines all the way to our patients. Our resilience helps us thrive as we innovate and evolve. We foster a safe and positive space where ideas are welcomed and rewarded. If you are self-driven, thrive at pace, continuously learning, and proactively taking on more, then this is the place for you.

Ready to make an impact? Join our Operations team today and contribute to life-changing medicines.

The annual base pay (or hourly rate of compensation) for this position ranges from $56,072.00 to $84,108.00 Hourly and salaried non-exempt employees will also be paid overtime pay when working qualifying overtime hours.

Base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. In addition, our positions offer a short-term incentive bonus opportunity; eligibility to participate in our equity-based long-term incentive program (salaried roles), to receive a retirement contribution (hourly roles), and commission payment eligibility (sales roles).

Benefits offered included a qualified retirement program [401(k) plan]; paid vacation and holidays; paid leaves; and, health benefits including medical, prescription drug, dental, and vision coverage in accordance with the terms and conditions of the applicable plans.

Additional details of participation in these benefit plans will be provided if an employee receives an offer of employment.

If hired, employee will be in an “at-will position” and the Company reserves the right to modify base pay (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.

XML job scraping automation by YubHub

The ideal candidate will have a high school diploma or General Educational Development (GED), demonstrate working knowledge of Microsoft (MS) Office applications, and be able to operate independently. Previous experience in a similar role is preferred, but not required.

As a Material Handler at Bayer, you will have the opportunity to work in a team environment, support strong attention to detail, and quickly learn new Information Technology (IT) systems and tools.

We offer a competitive hourly wage of $17.50 per hour, with additional compensation possible through a bonus or incentive program. Our benefits package includes health care, vision, dental, retirement, PTO, sick leave, and more.

If you're looking for a challenging and rewarding role in a dynamic organization, we encourage you to apply now.

XML job scraping automation by YubHub

Your key tasks will include: Handling, transporting, balancing, and providing active, auxiliary, and hazardous substances Performing weighings using simple or complex techniques, including computer-assisted methods Preparing hormone mixtures and combining active and auxiliary substances Working and sealing in foreign-air-supplied protective suits Conducting and documenting equipment and room cleaning Reporting and supporting the resolution of issues, prioritizing when necessary Taking samples for continuous identification of raw materials (NIR) Optimizing equipment utilization under the aspect of cost-benefit thinking Complying with safety regulations of UVV BG-Chemie and reporting to your supervisor

As a successful candidate, you will have a strong understanding of production processes and be able to work independently.

We offer a competitive salary and opportunities for professional growth and development.

XML job scraping automation by YubHub

You will work a rotating shift schedule, including some nights and weekends, as required. You will be responsible for performing basic maintenance of equipment, handling basic activities in Bayer systems (SAP and electronic networks), and applying operational excellence practices to operations (5S, Lean, Six Sigma, 5WHYs).

As a Seed Technician, you will also be responsible for troubleshooting problems associated with equipment, processes, and systems, performing preventive maintenance and inspections, and collaborating with key partners to deliver the business across plant and field operations.

You will be expected to demonstrate Visionary, Architect, Catalyst, Coach (VACC) behaviours to ensure accuracy, quality, and timely delivery of products. You will lead and engage in Daily Direction Setting (DDS) meetings, articulate shift objectives, and allocate resources across all active production areas.

You will work closely with other team members to identify ways to improve our processes. This is an opportunity to work in an environment where your ideas are heard, and you're encouraged to grow personally and professionally.

The successful candidate will have a high school diploma or equivalent, basic user knowledge of standard computer programs (Internet, Excel, PowerPoint, Word, tablets/smart devices), a valid driver's license, and the ability to lift 60lbs (a bag of seed).

Preferred qualifications include a bachelor's degree.

We offer a competitive hourly rate of $27.03 - $33.85 per hour with overtime as applicable. Starting salary is based on the candidate's experience, education, and market pay for a role in the region. Our sites offer excellent internal career growth opportunities within the seed technician role and in cross-functional positions. We also offer a full benefits package including generous insurance, 16 paid holidays, 3 weeks paid time off, 401k match & additional core contribution each year, and $2/hour premium pay for 2nd and 3rd shift.

XML job scraping automation by YubHub

Your key tasks will include:

• Operating packaging lines and specialized testing systems
• Executing all activities necessary for the proper operation of the packaging line
• Maintaining accurate documentation and records of production processes
• Conducting and documenting in-process controls during ongoing production
• Cleaning and maintaining equipment according to standard operating procedures

To be successful in this role, you will need to have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team.

If you are a motivated and detail-oriented individual with a passion for working in a fast-paced production environment, we encourage you to apply for this exciting opportunity.

We offer a competitive salary and benefits package, as well as opportunities for professional growth and development. Our company values diversity and inclusion, and we are committed to creating a work environment that is welcoming and supportive of all employees.

XML job scraping automation by YubHub

Your main responsibilities will include:

• Operating and maintaining packaging machines and equipment
• Ensuring quality control and performing regular checks on packaging materials
• Performing various tasks related to packaging and production, such as labeling and packaging
• Maintaining accurate records and documentation

To be successful in this role, you will need to have a strong attention to detail, excellent organizational skills, and the ability to work independently and as part of a team.

We offer a competitive salary and benefits package, including a comprehensive training program and opportunities for professional development.

If you are a motivated and detail-oriented individual who is looking for a challenging and rewarding role, please submit your application.

XML job scraping automation by YubHub

As a Container Washer, you'll play a crucial role in ensuring the cleanliness and quality of our production processes.

Responsibilities:

• Clean containers, pallets, stainless steel vessels, and washing equipment according to standard operating procedures
• Clean rooms and facilities according to standard operating procedures
• Document cleaning activities according to standard operating procedures
• Conduct inventory checks of cleaning materials after a set period
• Operate computerized cleaning systems and monitor system status, using software from the production control system
• Report any issues and assist in identifying problems
• Transport equipment within the facility and operate the automated transportation system
• Maintain safety standards and support improvements

Requirements:

• 6-12 months of work experience
• Ideally, experience in pharmaceutical production
• Knowledge of production processes
• IT skills for using standard software
• Strong quality awareness and technical understanding
• Proactive, reliable, and team-oriented with high levels of personal responsibility
• Excellent German language skills (written and spoken)
• Willingness to work in shift operations

What We Offer:

• Competitive salary of €3,307 per month (full-time) plus annual bonus, holiday pay, and Christmas bonus/13th month pay
• Opportunities for professional development through access to learning platforms such as LinkedIn Learning and Education First
• Support for health and well-being
• Sustainable mobility options, including job ticket and leased company bicycles
• Access to exclusive benefits and discounts from over 150 brands through our Corporate Benefits Program
• Celebrating diversity in an inclusive work environment where you're welcome, supported, and encouraged to bring your whole self to work

This is a 2-year fixed-term position with the possibility of extending.

XML job scraping automation by YubHub

Your primary responsibilities will include fostering collaboration in a flat network of autonomous entrepreneurial squads, adding value by guiding Unit and squad development, driving a culture of innovation, and serving as an escalation point for task and project prioritization, problem solving, continuous improvement, and conflict resolution.

You will also optimize squad members' performance, development, and empowerment through DSO principles, collaborate with internal and external networks to secure the support and resources needed for Unit success, and facilitate the co-creation of a shared vision and higher purpose that resonates with customers.

We seek an incumbent who possesses a Bachelor's degree in agriculture, an engineering discipline, Supply Chain Management, or a similar field with a minimum of 5 years of applicable experience, or a High School Diploma or GED with 8 years of applicable experience.

Additional qualifications include basic user knowledge of standard computer programs, a valid driver's license, and the ability to pass a pre-employment physical. Preferred qualifications include 5+ years' experience in managing and developing teams, leadership experience in manufacturing, supply chain, or the agriculture industry, and skill in leading, managing conflict, and negotiating with cross-functional teams.

This position is eligible for domestic relocation assistance and offers a competitive salary range of $97,760.00 - $146,640.00, plus additional compensation including a bonus or commission, and other benefits such as health care, vision, dental, retirement, PTO, and sick leave.

XML job scraping automation by YubHub

Your primary responsibilities will include fostering collaboration in a flat network of autonomous entrepreneurial squads, adding value by supporting Unit and squad development, driving a culture of innovation, and serving as an escalation point for task and project prioritization, problem solving, continuous improvement, and conflict resolution.

To be successful in this role, you will need to have a BS in agriculture, an engineering discipline, Supply Chain Management, or a similar field with a minimum of 5 years of applicable experience, or a High School Diploma or equivalent with 8 years of applicable experience. You will also need to have basic user knowledge of standard computer programs, a valid driver's license, and the ability to pass a pre-employment physical.

In addition to the required qualifications, preferred qualifications include 5+ years' experience in managing and developing teams, leadership experience in manufacturing, supply chain, or the agriculture industry, and skill in leading, managing conflict, and negotiating with cross-functional teams.

If you meet the requirements of this unique opportunity, and want to impact our mission Health for all, Hunger for none, we encourage you to apply now. Be part of something bigger. Be you. Be Bayer.

XML job scraping automation by YubHub

As an Anlagenbediener*in (all genders), you play a central role in ensuring the smooth operation of our packaging lines. You operate modern machinery, ensure the quality of our products, and contribute to achieving our corporate goals. Your tasks include operating the machines, carefully documenting and controlling all production steps, and cleaning and maintaining the equipment according to our quality standards. With your willingness to work shifts and your commitment to continuous improvement, you are a valuable part of our team.

Your Responsibilities and Accountabilities:

• Operate packaging lines and specific inspection systems, and perform all tasks necessary for the proper operation of the packaging line.
• Ensure proper documentation and control of charge records and logbooks, and perform and document in-process controls during ongoing production.
• Perform and control equipment, format part, and room cleanings according to standard operating procedures, and lead the associated documentation (eCR, charge protocol, and logbook).
• Implement partial disassembly of equipment and equipment parts, and work on equipping machines and equipment.
• Ensure cooperative, responsible, and continuous participation in product quality assurance.
• Ensure efficient utilization of equipment while considering costs and benefits.
• Actively participate in achieving departmental goals and engage in constructive and goal-oriented collaboration within the Packaging Department.

What You Bring:

• Completed 2-year vocational training, preferably with a technical or pharmaceutical background.
• Experience in operating production equipment is a significant asset to your expertise.
• Good PC skills, including software from the plant automation technology.
• Strong understanding of complex processes, responsible, and forward-thinking working style.
• Ability to engage in constructive and goal-oriented collaboration within the Packaging Department.
• High level of reliability and self-motivation, good communication skills, and enthusiasm for teamwork.
• Willingness to undergo on-the-job training and work in 3-shift operations.
• Excellent German language skills in writing and speaking.

What We Offer:

Our performance package is flexible, values-driven, and tailored to your lifestyle because what matters to you matters to us!

• Financial stability through a competitive remuneration package, including a monthly salary, annual bonus, holiday pay, and Christmas/holiday pay.
• Development opportunities through access to learning platforms such as LinkedIn Learning and our language learning platform Education First.
• Support for your health and well-being.
• Sustainable mobility through climate-friendly mobility options such as job tickets and bike-sharing.
• Exciting benefits and access to discounts from over 150 brands through our Corporate Benefits Program.
• Celebrating diversity in an inclusive work environment where you are welcome, supported, and encouraged to bring your whole personality.

This position is limited to two years, with the possibility of subsequent indefinite extension. Be You. Be Bayer #LI-AMSEMEA

XML job scraping automation by YubHub

As a Production Compliance Specialist, you will be responsible for creating and managing manufacturing instructions (MBRs) in our Manufacturing Execution System (MES), including creating MBR checklists. You will also create and review product quality reviews for the bulk production/forming area, create and manage machine recipes from production instructions, and conduct research for the forming area.

Responsibilities:

• Create and manage manufacturing instructions (MBRs) in MES, including creating MBR checklists
• Create and review product quality reviews for the bulk production/forming area
• Create and manage machine recipes from production instructions
• Conduct research for the forming area
• Create, coordinate, and implement change requests in MOC for the department
• Participate in projects and support implementation for the forming area
• Support the creation of cleaning instructions (eCRs) in MES, preparation and timely provision of production orders, and creation, reconciliation, and archiving of GMP documents for the forming area (e.g., SOPs, OIs, forms, risk analyses, etc.)

Requirements:

• Bachelor's degree in pharmacy or related field
• First-hand experience in the pharmaceutical industry, preferably in the manufacture of medicinal products and GMP documentation
• Good knowledge of GMP guidelines
• Strong quality awareness
• Proficiency in Microsoft Office applications (Outlook, Word, PowerPoint, Excel) and MES and document management systems
• High level of initiative and self-motivation
• Excellent communication and teamwork skills
• Very good German language skills and basic English language skills

What we offer:

• Competitive salary between €3,552 and €3,765 per month (full-time) plus annual bonus, holiday pay, and Christmas bonus/13th month salary
• Opportunities for further development through access to learning opportunities such as LinkedIn Learning and our language learning platform Education First
• Support for health and a self-care lifestyle
• Confirmation of sustainable mobility through climate-friendly mobility options such as job ticket and leased company bike
• Exciting benefits and access to discounts from over 150 brands through our Corporate Benefits Program
• Celebration of diversity in an inclusive work environment where you are welcome, supported, and encouraged to bring your whole personality

Further information: The position is limited to 2 years. Be You. Be Bayer#LI-AMSEMEA

XML job scraping automation by YubHub

Your main responsibilities will include evaluating quality defects and deviations in production, creating and implementing risk-mitigating measures, and supporting Good Manufacturing Practice (GMP) inspections and customer audits.

To be successful in this role, you will need to have a deep understanding of regulatory requirements and GMP guidelines, as well as excellent communication and teamwork skills.

In return, we offer a competitive salary and benefits package, including a comprehensive training program and opportunities for professional development.

If you are a motivated and detail-oriented individual with a passion for quality and compliance, we encourage you to apply for this exciting opportunity.

XML job scraping automation by YubHub

Your tasks and responsibilities will include understanding potential hazards and safe equipment operating practices in a manufacturing environment, understanding quality systems and guidelines that impact areas of responsibility, ensuring all potential equipment deficiencies and component defects are properly identified, and operating process test equipment to ensure process outputs conform to specified requirements. You will also be responsible for basic operation of custom machinery, exercising effective communication and teamwork skills, and providing guidance and training to lower-level production personnel.

If you're a detail-oriented individual with excellent communication skills and a passion for working in a fast-paced manufacturing environment, we encourage you to apply for this exciting opportunity.

XML job scraping automation by YubHub

Your responsibilities will include: Monitoring and verifying daily compliance of SOPs Performing daily pre-operational and operational plant inspections Continuously monitoring that the site follows Good Manufacturing Practices (GMPs) Regularly ensuring compliance of all raw materials, packaging materials, products in process, and finished products to specifications Performing laboratory tests such as APC, Mold and yeast for finished product Performing in-process quality control lab testing Creating Certificate of Analysis for product release Maintaining logs and other records including inventory lab chemicals Complying with GMPs, PPE, sanitation procedures, general housekeeping and food safety and food defense practices and procedures Entering test results on lab data system and generating reports Resolving supplier quality issues with raw materials Maintaining working knowledge of all instruments used for routine and non-routine sample testing and troubleshooting Conducting timely root cause analysis and enforcing improvements to process controls Assisting in the start of processing operations in conjunction with production department Performing ATP, environmental and allergen swabbing to support plant operations Communicating raw material and product quality issues to management Performing other duties as assigned

To be successful in this role, you will need: Must be 18 years or older with the ability to read, write and speak English specific to work instructions including but not limited to safety purposes High school, GED, or equivalent diploma required 2-4 years schooling in Food Science, Microbiology, Chemistry, Biology, or related fields preferred 2+ years of lab testing experience Ability to work with minimal supervision Strong mathematics skills Excellent attention to detail Superior communication skills Excellent organization skills, and abilities to make decisions on quality issues Ability to exert up to 50 pounds of force at times and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to lift, carry, push, pull or otherwise move objects, including the human body Ability to work in cold and hot environments (approximately 38F-80F degrees) Ability to be mobile in accomplishing tasks and or moving from one worksite (up to 1-mile range) to another

In return for your hard work, we offer a competitive salary and benefits package, including 20 paid vacation days plus sick time, really great benefits (yes, pet insurance is in there), free six packs of oatmilk, and genuinely great coworkers who are rooting for each other and the company to thrive.

XML job scraping automation by YubHub

We're looking for a Quality Control Technician to join our team. As a Quality Control Technician, you will be responsible for ensuring daily adherence to food safety, quality, and regulatory standards across the facility. This includes conducting routine inspections, sampling, laboratory testing, and documentation to verify compliance with SOPs, GMPs, and product specifications.

Responsibilities:

Compliance Monitoring & GMP Verification

• Verify daily compliance with SOPs and GMPs across the facility.
• Report any noncompliance or food safety concerns to the Quality Manager immediately.
• Conduct pre-operational and operational inspections and authorize production start-up with the Production team.
• Participate in the internal BRC auditing program.

Quality Monitoring, Sampling, Testing, and Environmental Monitoring Program

• Perform daily pre-operational ATP swabs to verify sanitation effectiveness.
• Conduct environmental and allergen monitoring per the site EMP and allergen program.
• Perform sampling and testing in accordance with written procedures and instructions.
• Document environmental findings and communicate issues requiring corrective action.

Raw Materials, In-Process, & Finished Goods Quality

• Monitor raw materials, in-process products, and finished product testing for compliance with specifications.
• Verify raw materials, in-process product, and finished goods meet specifications.
• Conduct routine quality checks on oatbase and finished products during the shift.
• Perform raw material testing per specifications.
• Conduct in-process laboratory tests including total solids, pH, viscosity, organoleptic checks, microbiological screens, moisture, density, and other required analyses.
• Perform finished product microbiological testing (APC, yeast, mold) and allergen testing as applicable.
• Enter results and complete release transactions in Sample Manager (LIMS) and/or designated lab systems.
• Prepare quality reports and generate Certificates of Analysis (CoAs).

Data Integrity, Equipment & Materials Management

• Maintain accurate logs, laboratory records, and data integrity.
• Maintain accurate logs, records, and data integrity in accordance with procedures.
• Maintain working knowledge of laboratory instruments; perform basic troubleshooting and escalate service needs as required.
• Perform calibration verification on lab equipment (pipettes, scales, moisture analyzers, pH meters, etc.).
• Monitor inventory of chemicals and consumables; submit reorder requests to Quality Leadership.

Cross-Functional Collaboration & Continuous Improvement

• Communicate raw material or product quality issues promptly.
• Communicate quality issues promptly to appropriate stakeholders.
• Work with Operations, Engineering, and Purchasing to address and resolve supplier quality concerns.
• Participate in root cause analysis and support CAPA activities.
• Recommend and implement improvements to process controls, including SPC adjustments.

Safety & Housekeeping

• Maintain a clean, organized, and safe work environment.
• Follow all safety procedures, including proper chemical handling and PPE use.
• Contribute to a strong site safety culture through proactive reporting.
• Perform additional duties as assigned.

XML job scraping automation by YubHub

Your responsibilities will also include documenting trial records and preparing summaries of trial results, following up and reviewing, organizing, analyzing and recording data (process parameters and release raw material parameters) as outlined in the pilot plant request. You will also analyze samples from the trials with analytical tools like pH, viscosity, etc. and microbiologically.

Additionally, you will write routines, checklists, instructions, and updates when required, be part of risk assessments, do required inventory and maintain the lists up to date, support pilot team with mechanical repair, and be part of maintenance activities for machinery.

This role requires availability for shift-based work and jumping into lab analyses whenever needed.

To thrive in this role, we believe you have a High School degree or Higher Vocational Education, 5+ years' experience working in Food Manufacturing & Mechanical repair, strong focus on safety, basic MS office skills, and good and effective communication skills in English, both oral and written.

XML job scraping automation by YubHub

Your primary responsibilities will include providing tactical scheduling and strategic long-range planning expertise to our production teams. You will coordinate, review, plan, and schedule inputs from the business and planning to create an integrated master schedule. You will also utilize Foundry and other applications to ensure work is scheduled and prioritized accurately and efficiently, and resources are allocated appropriately.

In addition, you will prepare daily work schedules, track work progress, update project critical path schedules, and advise leadership of needed adjustments to daily work activities. You will perform schedule baseline change control, collection, and tracking performance, critical path analysis, and variance analysis as required.

You will ensure requisite production requirements are properly scheduled to facilitate an efficient production process. You will schedule production, operations planning, and engineering support to eliminate obstacles and deliver product on time.

You will coordinate support from other internal resources such as inspection, testing, engineering, and supply chain as needed to meet program deliverables. You will lead efforts to uncover root-cause and develop permanent resolution on issues found during product builds as required.

You will identify and support improvement opportunities for product yield, quality, safety, cost, and team efficiency. You will identify process automation opportunities and drive organizational efficiency improvements.

You will organize and communicate the daily priorities to production coordinators, team leads, and supervisors as required. You will provide daily visibility, weekly status, and monthly reviews on schedule performance.

You will develop and analyze metrics that tie production to enterprise goals as required. You will lead the creation of scheduling tools and initiatives in support of Anduril's overall scheduling maturation.

XML job scraping automation by YubHub

Your primary responsibilities will include providing tactical scheduling and strategic long-range planning expertise to our production teams. You will coordinate, review, plan, and schedule inputs from the business and planning to create an integrated master schedule. You will also utilize Foundry and other applications to ensure work is scheduled and prioritized accurately and efficiently, and resources are allocated appropriately.

In addition, you will prepare daily work schedules, track work progress, update project critical path schedules, and advise leadership of needed adjustments to daily work activities. You will perform schedule baseline change control, collection, and tracking performance, critical path analysis, and variance analysis as required.

You will ensure requisite production requirements are properly scheduled to facilitate an efficient production process. You will schedule production, operations planning, and engineering support to eliminate obstacles and deliver product on time. You will also coordinate support from other internal resources such as inspection, testing, engineering, and supply chain as needed to meet program deliverables.

As a Production Scheduler, you will lead efforts to uncover root-cause and develop permanent resolution on issues found during product builds as required. You will identify and support improvement opportunities for product yield, quality, safety, cost, and team efficiency. You will also identify process automation opportunities and drive organizational efficiency improvements.

You will organize and communicate the daily priorities to production coordinators, team leads, and supervisors as required. You will provide daily visibility, weekly status, and monthly reviews on schedule performance. You will develop and analyze metrics that tie production to enterprise goals as required.

Finally, you will lead the creation of scheduling tools and initiatives in support of Anduril's overall scheduling maturation.

XML job scraping automation by YubHub

Key responsibilities include:

• Working across the production floor to make sure parts are stocked and available when needed
• Identifying, pulling, packing, crating, labeling, loading, and securing product
• Ensuring orderly production and distribution of products by pulling orders from inventory, delivering production materials and supplies where needed
• Completing cycle counts and conducting all activities with inventory accuracy as a top priority
• Maintaining inventory by identifying, labeling, and keeping materials and supplies in stock, recording location of inventory, and reporting shortages
• Operating forklifts, pallet jacks, and other machinery to move items, or signaling machine operators to move materials onto and off trucks and loading docks
• Couriers inventory as needed between Anduril's sites in Irvine, Santa Ana, and Costa Mesa
• Expediting flow of material, parts, and assemblies within or between departments in accordance with production and shipping schedules

Required qualifications include:

• 2+ years as a warehouse associate or equivalent role
• Ability to work in a fast-paced environment
• Strong attention to detail and good communication skills
• Valid driver's license
• Ability to be onsite, local to Irvine, CA, Santa Ana, CA, and Costa Mesa, CA
• Must be a U.S. Person due to required access to U.S. export-controlled information or facilities

XML job scraping automation by YubHub

Required qualifications include a high school diploma or equivalency certificate, 2+ years of experience in a manufacturing, shipping, or logistics environment, 2+ years of experience supporting administrative processes, experience with MRP/ERP/MES (Netsuite, Oracle or equivalent systems), strong computer skills, familiar with the full suite of MS Office products, Tableau, Confluence, SQL or any reporting feature experience, and being a U.S. Person due to required access to U.S. export controlled information or facilities. Preferred qualifications include 2+ years of experience handling parts in a manufacturing setting, experience in organizing files and documents, inventory experience, experience in aerospace, automotive, semiconductor, or electronic manufacturing environments, APICS certification, and Lean Manufacturing Principles.

XML job scraping automation by YubHub

Key responsibilities include:

• Following detailed blueprints, schematics, and instructions to assemble products or systems
• Using various hand tools and power tools to put components together
• Combining different subsystems or components into a larger, functioning system
• Ensuring compatibility and proper communication between integrated components
• Maintaining detailed records of assembly processes, test results, and any issues encountered
• Following safety protocols and procedures in the workplace

Requirements include:

• 1+ years of experience working in a manufacturing setting (aerospace, electronics, or medical industry is preferred)
• Proficient with common hand tools and power tools such as pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, multimeters, test boxes or specialized test equipment
• Proficient with computer use (standard browser, word processing applications)
• Able to read a wiring diagram and follow assembly instructions
• Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment
• Ability to effectively communicate (verbal and written) with engineering and production

Preferred qualifications include:

• Demonstrated experience with many aspects of aircraft or ground systems fabrication, repair, assembly, and operation including structural fabrication, integration, composites fabrication, and avionics build/integration/test
• Mechanically assemble complex electro-mechanical assemblies, high quality wire harnesses, test racks, junction boxes, and associated components involving hand soldering and component fabrication
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks

Salary range is $23-$34/hour for Production Technician/Level 1, $25-$38/hour for Production Technician/Level 2, and $29-$43/hour for Production Technician/Level 3.

XML job scraping automation by YubHub

Key Responsibilities: Assess Training Needs: Partner with manufacturing, quality, and operations leaders to identify skill gaps, define learning priorities, and align training to site and business objectives. Design and Develop Training: Create or adapt technician and leadership training content, materials, and hands-on learning experiences to meet site-specific needs. Scope & Manage Learning Projects: Own training project plans end-to-end , from needs analysis and design through delivery, resource planning, and post-training evaluation. Deliver & Facilitate Training: Facilitate technician and leadership development programs; coach team trainers to deliver engaging and effective sessions. Manage Manufacturing Onboarding: Ensure the Technician Training team delivers consistent, high-quality onboarding for all new manufacturing hires at the Ohio site. Plan & Schedule Training: Maintain a site-wide training calendar, coordinate resources, and align delivery timelines with production schedules. Track Outcomes & Drive Continuous Improvement: Measure training effectiveness through pre- and post-training metrics; use data and feedback to continuously improve content and delivery. Collaborate & Communicate: Act as a key liaison between production leaders, L&D, safety, and quality to ensure alignment and seamless rollout of new training initiatives. Lead and develop the Tech Training Team: Provide direction and support to technician trainer(s), ensuring excellence in facilitation, documentation, and execution. Enable internal training capability: Develop and facilitate train the trainer programs, and provide resources that enable teams to deliver their own effective training. Partner and expand impact: Engage with vendors and external partners to develop specialized training solutions and strengthen local talent pipeline

Requirements: 8+ years of experience in Learning & Development, Technical Training, or similar roles People leadership experience Proven ability to design, manage, and deliver training programs from concept to completion Strong facilitation skills , able to engage and train both technicians and leaders Excellent organizational skills and ability to manage multiple concurrent projects Experience in a manufacturing or production environment strongly preferred Strong collaborator and communicator who can partner effectively with cross-functional teams Data-driven mindset with a focus on training impact and measurable outcomes Eligible to obtain and maintain an active U.S. Secret security clearance

XML job scraping automation by YubHub

Your responsibilities will include managing production flow by monitoring, tracking, and moving parts to ensure timely delivery, coordinating parts movement through various stages including receiving, stock rooms, and production, and ensuring proper handling and protection of parts according to Anduril specifications.

You will also be responsible for managing off-site processing of parts to meet delivery schedules, collaborating with planning, procurement, engineering, and production teams to maintain accurate MRP/ERP data, and assisting in resolving data discrepancies that affect demand, schedules, or system integrity.

In addition, you will develop and analyse metrics to optimise inventory management, communicate part status and completion estimates to leadership weekly, support logistics processes through innovative workflow staging, and manage material certifications and prevent use of uncertified materials.

You will work closely with production supervisors to ensure completion of metric-driven actions, support 'return to stock' and inventory purge actions, and develop and maintain reports for internal and customer use.

If you have a high school diploma or equivalency certificate, 1+ years of experience supporting administrative processes, strong computer skills, familiarity with the full suite of MS Office products, 1+ years of inventory experience, and knowledge of MRP/ERP systems, then this could be the ideal role for you.

US Salary Range $32-$43 USD.

XML job scraping automation by YubHub

You will be responsible for the full lifecycle of leadership development initiatives, from content creation and facilitation to training assignments, upkeep, and metric-driven continuous improvement. This position will require 30% travel.

Key Responsibilities: Assess Leadership Development Needs: Partner with senior manufacturing, operations, and HR leaders across all sites to identify critical leadership skill gaps, define strategic development priorities, and align training initiatives with enterprise-wide objectives. Design & Develop Leadership Programs: Lead the creation and adaptation of foundational and advanced leadership development content, modules, and experiential learning activities specifically tailored for production and manufacturing leaders. This includes defining learning objectives, curriculum, and delivery methods. Program Ownership & Management: Own end-to-end leadership development project plans – from needs analysis and strategic design through delivery, resource allocation, and robust post-training evaluation across all sites. Facilitate & Deliver High-Impact Training: Directly facilitate engaging and effective leadership development programs for diverse cohorts of production and manufacturing leaders, fostering critical thinking and practical application. Establish Foundational Leadership Training: Develop and manage a standardized curriculum to ensure all new and existing production leaders complete essential foundational leadership training, covering core principles, management best practices, and operational leadership. Manage Training Logistics & Administration: Oversee the assignment and tracking of leadership training participation, maintain curriculum up-to-date, manage scheduling across multiple sites, and ensure seamless delivery of all program components. Track Outcomes & Drive Continuous Improvement: Develop and implement metrics to measure the effectiveness and impact of leadership development programs (e.g., leadership effectiveness scores, retention, performance improvements). Utilize data and feedback to continuously refine and optimize content and delivery strategies. Collaborate & Influence: Act as a key liaison between manufacturing leadership, Human Resources, Global L&D, and other stakeholders to ensure alignment, gain buy-in, and seamlessly roll out new leadership development initiatives across the organization. Enable Internal Facilitation Capabilities: Develop and facilitate 'train-the-trainer' programs and provide resources to empower internal subject matter experts or existing L&D professionals to effectively deliver and reinforce leadership development content within their respective sites or functions. Partner & Expand Impact: Engage with external vendors, academic institutions, and industry experts to bring specialized leadership development solutions and best practices into the organization, strengthening our global talent pipeline. Perform other responsibilities as assigned to support the manufacturing leadership development strategy for manufacturing and production.

Requirements: 8+ years of progressive experience in Learning & Development, Organizational Development, or Leadership Development, with a strong focus on program management. Proven experience designing, managing, and delivering leadership development programs from concept to completion for diverse audiences. Strong facilitation skills with demonstrated ability to engage, inspire, and develop leaders at various levels. Exceptional program management and organizational skills, capable of managing multiple complex projects across different sites concurrently. Experience working within or directly supporting a manufacturing, production, or heavy industrial environment is preferred. Demonstrated ability to collaborate effectively and build strong relationships with cross-functional and senior leadership teams. Data-driven mindset with a proven ability to define metrics, analyze training impact, and drive continuous improvement. Eligible to obtain and maintain an active U.S. Secret security clearance.

Preferred Qualifications: Lean Six Sigma. Experience implementing leadership development programs on a multi-site or global scale. Certifications in leadership assessment tools (e.g., 360 feedback, behavioral assessments). Experience with Learning Management Systems (LMS) and learning experience platforms (LXP) for program administration and content delivery.

XML job scraping automation by YubHub

Your role is critical in driving efficiency, managing schedules, mitigating risks, and ensuring that projects are delivered on time, within scope, and on a budget.

Key responsibilities include:

• Process Optimisation: Drive continuous improvement initiatives aligned with our COGs objectives to enhance production efficiency, scalability, and cost-effectiveness.
• Budget & Cost Control: Monitor project budgets, track progress and ensure we are continually focused on solving the largest problems to improve the bottom line.
• Stakeholder Communication: Provide regular updates to internal teams and leadership, ensuring transparency on project status, risks, and solutions.
• Resource Management: Ensure appropriate allocation of materials, labour and equipment to meet production goals.
• New Product Information (NPI): Be the production point of contact for all changes to existing products as well as new products in our pipeline.
• Risk Management: Identify, assess, and mitigate potential risks and roadblocks that could impact project timelines or operational objectives.
• Cross Functional Collaboration: Coordinate between commercial, engineering, supply chain, manufacturing, quality and leadership teams to align production efforts with business objectives.

Required qualifications include a Bachelor's degree in Engineering, Operations Management or a related field, and 5+ years of experience in operations program management, production, manufacturing, preferably in defence, aerospace, or complex hardware industries.

Preferred qualifications include experience in defence, aerospace, or automotive manufacturing, and experience with ERP, MRP, MES, PLM systems.

XML job scraping automation by YubHub

Key responsibilities include:

• Working across the production floor to ensure parts are stocked and available when needed
• Identifying, pulling, packing, crating, labeling, loading, and securing product
• Ensuring orderly production and distribution of products by pulling orders from inventory, delivering production materials and supplies where needed
• Completing cycle counts and conducting all activities with inventory accuracy as a top priority
• Maintaining inventory by identifying, labeling, and keeping materials and supplies in stock, recording location of inventory, and reporting shortages
• Operating forklifts, pallet jacks, and other machinery to move items, or signaling machine operators to move materials onto and off trucks and loading docks
• Couriers inventory as needed between Anduril's sites in Irvine, Santa Ana, and Costa Mesa
• Expediting the flow of material, parts, and assemblies within or between departments in accordance with production and shipping schedules

Required qualifications include:

• 2+ years as a warehouse associate or equivalent role
• Ability to work in a fast-paced environment
• Strong attention to detail and good communication skills
• Valid driver's license
• Ability to be onsite, local to Irvine, CA, Santa Ana, CA, and Costa Mesa, CA
• Must be a U.S. Person due to required access to U.S. export-controlled information or facilities

Preferred qualifications include:

• 1+ years forklift experience and license
• Experience working in the defense/aerospace industry
• Familiarity with Enterprise Resource Planning (ERP) systems and/or other warehouse management and inventory control tooling
• Familiarity with Microsoft Office or equivalent office management tooling
• Familiarity with Inventory Management through lot/serial/batch tracking
• Experience packaging and handling hazardous shipments
• Excellent customer service skills
• Able to adapt in fast-paced environments
• Ability to flex as work shifts can be subject to change depending on the business need
• Ability to prioritize tasks efficiently and effectively

US Hourly Range $23-$30 USD

XML job scraping automation by YubHub

Additionally, you will coordinate off-site processing of parts to ensure on-time delivery as required. You will support the manufacturing/production, supply chain, and inventory teams cross-functionally. Maintaining clean and accurate MRP/ERP/MES data is essential. You will assist with the resolution of inventory inaccuracies to help supply planning and production teams meet expected demand schedules.

You will work with production managers to ensure all metrics-driven action requirements are completed. Developing and maintaining reports to highlight needs, deliverables, and constraints as required for internal and customer use is also a key responsibility. Communicating part status and estimated completion dates to leadership weekly is also necessary.

Supporting logistics process through innovative staging of workflow as required is another key responsibility. Supporting management of material certifications as required to prevent the use of uncertified materials is also essential. Supporting production and inventory personnel with 'return to stock' and inventory purge actions is also necessary.

Organizing and maintaining the physical and electronic library for production-related tooling and calibration databases as required is also a key responsibility. Supporting assigned production cells with work-order management activities as required is also necessary.

This role requires the ability to lift and move items of 20 pounds or more on a regular basis and repetitively lift weights on raised surfaces. The ability to climb, bend, kneel, crawl, and stoop on a frequent basis and for extended periods is also necessary.

Willingness to work overtime and weekends as needed is also required.

XML job scraping automation by YubHub

Your primary responsibilities will include:

• Leading and developing a team of maintenance specialists to ensure the reliable operation of all production equipment and facilities.
• Developing and implementing comprehensive Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs to minimize downtime and extend equipment life.
• Overseeing all reactive maintenance activities, ensuring prompt and effective troubleshooting and repair of production equipment breakdowns.
• Managing spare parts inventory, ensuring critical spares are available while optimizing inventory levels and costs.
• Troubleshooting complex mechanical, electrical, pneumatic, and hydraulic issues on various production machinery.

To succeed in this role, you will need to have exceptional leadership, communication, and interpersonal skills. You should also have a strong track record of improving equipment reliability and reducing downtime.

In addition to your technical skills and experience, you will need to be able to work in a fast-paced production environment and be able to adapt to changing priorities and deadlines.

If you are a motivated and experienced maintenance professional looking for a new challenge, we encourage you to apply for this exciting opportunity.

XML job scraping automation by YubHub

Key responsibilities include:

• Monitoring, tracking, and moving parts as required through the production flow to ensure timely delivery to next production location.
• Coordinating physical movement of parts through receiving inspection, stock rooms, purchasing, production resources or any applicable work center.
• Ensuring parts are handled and protected properly and within company specifications.
• Coordinating off-site processing of parts to ensure on-time delivery as required.
• Supporting the manufacturing/production, supply chain and inventory teams cross-functionally.
• Maintaining accurate and up-to-date MRP/ERP/MES data.
• Assisting with resolution of inventory inaccuracies to help supply planning and production teams meet expected demand schedules.
• Working with production managers to ensure all metrics-driven action requirements are completed.
• Developing and maintaining reports to highlight needs, deliverables, and constraints as required for internal and customer use.
• Communicating part status and estimated completion dates to leadership weekly.
• Supporting logistics process through innovative staging of workflow as required.
• Supporting management of material certifications as required to prevent use of uncertified materials.
• Supporting production and inventory personnel with 'return to stock' and inventory purge actions.
• Organizing and maintaining the physical and electronic library for production-related tooling and calibration database as required.
• Supporting assigned production cells with work-order management activities as required.

Requirements include:

• High school diploma or equivalency certificate.
• 2+ years of experience in a manufacturing, shipping, or logistics environment.
• 2+ years of experience supporting administrative processes.
• Experience with MRP/ERP/MES (Netsuite, Oracle or equivalent systems).
• Strong computer skills, familiar with the full suite of MS Office products.
• Tableau, Confluence, SQL or any reporting feature experience.
• Must be a U.S. Person due to required access to U.S. export-controlled information or facilities.

Preferred qualifications include:

• 2+ years of experience handling parts in a manufacturing setting.
• Experience in organizing files and documents.
• Inventory experience.
• Experience in aerospace, automotive, semiconductor, or electronic manufacturing environments.
• APICS certification.
• Lean Manufacturing Principles.

XML job scraping automation by YubHub

As a Sr. Compensation Partner, you will drive Anduril's success by bringing your compensation expertise to our leadership team and helping us scale. You will utilize and combine your prior high growth company experience, quantitative rigor, business mindset, and communication skills to serve as a strategic advisor to our People Business Partners.

Key responsibilities include:

• Partner with Senior Leaders and People Business Partners to drive and ensure the success of Anduril's compensation programs for Manufacturing including Production, Supply Chain, and Engineering teams at Arsenal-1.
• Guide People Business Partners and leadership teams throughout annual and mid-year compensation planning cycles specific to our Arsenal-1 population.
• Design, implement, and manage comprehensive compensation programs, including salary structures, incentive plans, and equity compensation, aligned with organisational strategy and market trends.
• Lead job evaluation processes, conduct market pricing analyses, and ensure internal equity and external competitiveness across all job families and levels.
• Partner closely with leadership and HR teams to resolve complex compensation issues, support strategic decision-making, and drive the implementation of compensation initiatives across the organisation.

In addition to these responsibilities, you will also work closely with our People Operations team during our annual & midyear compensation cycles including implementation, budgets, UAT testing and spearhead data integrity.

You will lead change management and communications of compensation practices with managers, team members, and across the People Team.

You will build strong partnerships with the Production/Manufacturing Division Leads, People Business Partner, Talent, Payroll, Legal, Stock, Finance and Accounting teams as well as our 3rd party vendors.

You will work closely with and interrogate compensation data, to form data driven guidance to People Business Partners and Leaders.

You're a proactive motivated problem solver; offering to fill skill gaps and offer solutions; we'd rather tell you slow down than accelerate.

You enjoy working at a place where no one minds if you leave early one day to go to an appointment or run an errand, but you also don’t mind responding to Slacks in the evening while you’re watching Netflix.

XML job scraping automation by YubHub

This role requires a seasoned professional with a proven track record of commanding manufacturing environments and fostering a culture of continuous improvement.

Key responsibilities include:

• Ensuring consistent, safe, and efficient production by leading initiatives to enhance product output and operational capabilities.

• Championing manufacturing optimization, driving cost reduction, quality improvement, productivity gains, and continuous improvement activities (including 5S) to boost utilization and uptime.

• Managing process capability and efficiency initiatives to reduce cycle times, increase yield, and prevent escapes.

• Championing cross-training and safety programs ensuring adherence to procedures, current training, incident documentation, and proactive hazard correction.

• Improving equipment, data and systems capability, managing Capex & asset lifecycle and integrating physical best practices

• Leading digital tool enhancements and integrating systematic best practices

• Supporting compliance with AS9100, FAR/DFAR, and MRA/MRL assessments, while collaborating on digital tool enhancements and integrating best practices.

Qualifications include:

• Bachelor’s degree in Engineering, Operations Management, Business Administration, or a related field.

• 8+ years of experience in manufacturing operations leadership, with a strong track record in driving production improvements and managing complex processes.

• Proven expertise in leading safety programs, implementing training, managing asset lifecycle and change control, and overseeing critical compliance standards (e.g., AS9100, FAR/DFAR).

• Demonstrated success in manufacturing optimization, including cost reduction, quality enhancement, productivity increases, and the application of continuous improvement methodologies (e.g., 5S).

• Strong communication and project management skills, with the ability to articulate strategic initiatives, manage cross-functional teams, and deliver concise leadership reports.

• Eligible to obtain and maintain an active U.S. security clearance.

Preferred qualifications include experience with Lean and Six Sigma methodologies, integrating hardware, software, and firmware in end system products, and familiarity with Process Verification and Validation (V&V) practices.

XML job scraping automation by YubHub

Your responsibilities will include:

• Following detailed blueprints, schematics, and instructions to assemble products or systems
• Using various hand tools and power tools to put components together
• Combining different subsystems or components into a larger, functioning system
• Ensuring compatibility and proper communication between integrated components
• Maintaining detailed records of assembly processes, test results, and any issues encountered
• Following safety protocols and procedures in the workplace

As a Production Technician, you will have the opportunity to work on a variety of projects and contribute to the development of new products and technologies.

We offer a competitive salary and benefits package, including healthcare benefits, income protection, generous time off, and professional development opportunities.

If you are a motivated and detail-oriented individual who is looking for a challenging and rewarding role, we encourage you to apply.

XML job scraping automation by YubHub

Key responsibilities include:

• Providing tactical scheduling and strategic planning expertise to our production teams
• Scheduling production, operations planning, and engineering support to eliminate obstacles and deliver product on time
• Organising and communicating the daily priorities to production coordinators, team leads and supervisors as required
• Providing daily visibility, weekly status, and monthly reviews on schedule performance
• Developing and analysing metrics that tie production to enterprise goals as required
• Supporting the creation of scheduling tools and initiatives in support of Anduril's overall scheduling maturation
• Developing a schedule for our production line derived from the integrated Master Schedule
• Working with the planning teams to ensure MRP signals are reflective of actual production needs
• Utilising Foundry and other applications to ensure work is scheduled and prioritised accurately and efficiently, and resources allocated appropriately
• Preparing daily work schedules, tracking work progress, updating project critical path schedules, and advising leadership of needed adjustments to daily work activities
• Performing schedule baseline change control, collection and tracking performance, critical path analysis and variance analysis as required
• Ensuring requisite production requirements are properly scheduled to facilitate an efficient production process
• Coordinating support from other internal resources such as inspection, testing, engineering, and supply chain as needed to meet program deliverables
• Leading efforts to uncover root-cause and develop permanent resolution on issues found during product builds as required
• Identifying and supporting improvement opportunities for product yield, quality, safety, cost and team efficiency
• Identifying process automation opportunities and driving organisational efficiency improvements

Required qualifications include:

• Bachelor's degree or 3 years of manufacturing scheduling experience
• Eligible to obtain and maintain an active U.S. Secret security clearance

Preferred qualifications include:

• 2+ years of scheduling experience with MS Project or similar scheduling software
• 4+ years of practical experience with ERP/MRP systems in a production environment
• Familiarity with Lean Six Sigma and Kaizen
• Project management professional certification
• Flexibility for supporting off-shift hours, extended hours, and weekends as needed
• Must be able to lift 25 lbs unassisted

The salary range for this role is $86,000-$112,000 USD.

XML job scraping automation by YubHub

You'll be instrumental in building out the infrastructure for a new production line supporting a next-generation jet, including selecting and deploying capital equipment, implementing hardware and software tools, and establishing robust production systems.

Working across engineering, supply chain, and production, you'll ensure smooth integration of new technologies and provide mentorship to other engineers.

This role is ideal for someone who thrives on cross-functional impact, technical leadership, and factory-scale execution.

XML job scraping automation by YubHub

You'll play a key role in turning strategy into reality,removing obstacles, maintaining momentum, and enabling teams to deliver at scale.

Responsibilities:

• Own manufacturing program outcomes end-to-end. Build and drive the integrated manufacturing program plan (WBS/IMS), manage critical path and cross-functional dependencies, and take full accountability for hitting build and ramp milestones,not just reporting status.

• Operate as the execution engine across functions. Lead day-to-day coordination across Production, Manufacturing Engineering, MP&L, Supply Chain, Quality, Test, Facilities, Construction, and Engineering aligning priorities, resolving friction, and ensuring no workstream drifts.

• Move fast to unblock reality. Identify bottlenecks early (design maturity, supplier lead times, tooling delays, facility readiness, material constraints) and aggressively drive mitigation plans to closure. Escalate when necessary but default to solving laterally and decisively.

• Translate engineering intent into manufacturing action. Turn evolving product development plans and engineering releases into structured readiness gates, executable build plans, and clearly defined entry/exit criteria from prototype through pilot and production ramp.

• Drive manufacturing readiness with urgency. Ensure tooling, equipment, routings, work instructions, materials, inspection/test capability, facilities, and workforce readiness are aligned ahead of builds closing gaps before they impact the floor.

• Own change impact management. Coordinate ECR/ECO cut-ins, retrofit strategies, and configuration alignment to protect schedule, build integrity, and production flow.

• Run a disciplined operating cadence. Lead weekly cross-functional reviews, maintain risk and issue registers, drive action tracking with clear owners and deadlines, and provide crisp executive updates that highlight tradeoffs and required decisions.

• Integrate facilities and equipment milestones. Embed construction, utilities, equipment installation, and commissioning into the program plan ensuring space and infrastructure readiness never become the critical path surprise.

• Stay close to the floor. Be present where execution happens rapidly translating real-world constraints into plan updates and actionable cross-functional decisions.

• Continuously raise the bar. Improve program management standards, tools, readiness frameworks, and execution rhythms to make future manufacturing programs faster, more predictable, and more scalable.

XML job scraping automation by YubHub

Key responsibilities include:

Training and certifying team members on production processes and company policies. Ensuring safety, quality, and production standards are met. Coordinating manpower to optimize production flow. Acting as a backup to the production supervisor when needed. Collaborating with the team to identify areas for improvement in the production process. Implementing strategies to enhance efficiency, reduce waste, and maintain production targets.

The ideal candidate will have proven experience in a production or manufacturing environment, strong leadership and team management skills, excellent communication and training abilities, and understanding of safety regulations, quality control, and production processes.

Physical demands include the ability to perform physically demanding work for extended periods of time, frequently and repetitively lifting, pushing, and carrying up to 20 lbs, and standing and walking for up to 12 hours/day.

XML job scraping automation by YubHub

The successful candidate will develop and execute a comprehensive continuous improvement strategy aligned with organisational goals, identify opportunities for improvement across processes, workflows, and systems, and lead Lean Manufacturing projects to eliminate waste, reduce costs, and improve quality.

Key responsibilities include conducting Value Stream Mapping (VSM), Kaizen events, and root cause analyses, establishing Key Performance Indicators (KPIs) to monitor progress and measure the success of improvement initiatives, and preparing and presenting regular reports on process improvement metrics and achievements.

The ideal candidate will have a strong background in manufacturing processes, excellent leadership and interpersonal communication skills, and proficiency in continuous improvement tools (e.g., DMAIC, PDCA, 5S, Kanban).

This is a full-time position requiring a minimum of six years of technical knowledge of manufacturing processes in an automotive supplier work environment.

In addition to a competitive salary, we offer a range of benefits including training and development opportunities, a positive team environment, and the chance to work on challenging projects that make a real impact on our business.

XML job scraping automation by YubHub

Your key responsibilities will include setting up and operating various production and/or test equipment to perform machining, assembly, curing, painting, mixing, quality checks, and other production activities. You will also be required to perform all work in compliance with standardized work instruction documents and established safety procedures. Additionally, you will produce a quality product in a safe and efficient manner, and perform minor maintenance activities and may assist support associates in other maintenance duties.

To be successful in this role, you will need to have a high school diploma and additional technical training is helpful. At least one year of manufacturing experience is desired. You will also need to have the ability to work in a team environment.

This is an entry-level position.

XML job scraping automation by YubHub

Key Responsibilities:

• Conduct daily checks to ensure the safe and efficient operation of our machinery
• Perform or oversee preventive maintenance according to scheduled plans
• Manage inventory of spare parts, including price quotes and delivery times
• Manage the entry and exit of the Maintenance store
• Participate in weekly action plans with the Production team to determine priorities for improvement
• Contribute to long-term improvements
• Monitor and adjust the state and settings of machinery using appropriate measuring equipment
• Replace defective parts in a timely manner and clean the area after each intervention
• Write reports of interventions and update technical documents
• Adjust technical equipment according to specifications and production needs
• Develop preventive maintenance plans (scheduling) and ensure their follow-up
• Coordinate and organize the follow-up of external work by contractors
• Select suppliers in accordance with group purchasing procedures

Requirements:

• Bachelor's degree or higher in industrial maintenance or electro-technical engineering
• Proficiency in Office, SAP, and Excel software
• Knowledge of the operation of an atelier, press, and mold
• Knowledge of maintenance on production equipment in an industrial environment
• Electrical certifications and CACES 2 or 3 training desirable

Desired Qualities:

• Tenacity, rigour, pedagogy, curiosity, and versatility
• Team spirit, analytical and synthetic spirit
• Ability to organize and manage priorities
• Continuous improvement and problem-solving
• Open-mindedness, integrity, respect, and commitment

XML job scraping automation by YubHub

Key Responsibilities

• Ensure compliance with HSE regulations and the use of personal protective equipment (PPE)
• Implement and maintain standardized work processes, 5S, and Total Productive Maintenance (TPM)
• Monitor and update production documents
• Produce first pieces, accompany new employees, and conduct time studies
• Assign operators according to needs and communicate with the production supervisor

Performance and Reactivity

• Contribute to achieving HSE, quality, cost, delivery, and personnel objectives
• Apply reaction rules and report alerts in a timely manner

Team Animation

• Lead daily briefings and communicate KPIs
• Train new employees and promote versatility
• Provide regular feedback on performance
• Ensure temporary replacements in case of absence

Continuous Improvement

• Promote improvement ideas (process, materials, organization)
• Participate in review of rejects and Control Tower actions
• Ensure interface with quality, logistics, and maintenance teams

Benefits

• Competitive salary and benefits package
• Opportunities for professional growth and development
• Collaborative and dynamic work environment
• Recognition and rewards for outstanding performance

Requirements

• 2+ years of experience in a production or supervisory role
• Strong knowledge of HSE regulations and production processes
• Excellent communication and leadership skills
• Ability to work in a fast-paced environment and adapt to changing priorities
• Strong analytical and problem-solving skills

Preferred Skills

• Experience with standardized work processes and TPM
• Knowledge of 5S and lean manufacturing principles
• Familiarity with quality control and assurance processes
• Ability to work in a team environment and build strong relationships with colleagues
• Strong communication and interpersonal skills

We offer a competitive salary and benefits package, opportunities for professional growth and development, a collaborative and dynamic work environment, recognition and rewards for outstanding performance, and a chance to work with a leading global supplier of automotive interior and exterior components.

XML job scraping automation by YubHub

We are seeking a skilled Maintenance Technician to join our team in Izernore, France. As a Maintenance Technician, you will be responsible for ensuring the smooth operation of our manufacturing equipment and facilities.

Responsibilities

• Participate in the organisation and planning of preventive and corrective maintenance
• Execute maintenance work on production equipment in accordance with the established schedule
• Organise, plan and ensure the maintenance of level 2 and 3 equipment, as well as the adjustment, maintenance and upgrading of production equipment programming
• Ensure the receipt and qualification of production equipment in accordance with the specifications, safety rules and environmental regulations
• Ensure that preventive maintenance constraints are taken into account for new equipment to be installed
• Manage maintenance in your area of expertise (corrective actions, analysis of micro-failures, implementation of an action plan, etc.)
• Manage the store in a specialty

Requirements

• Bachelor's degree or higher in industrial maintenance or electro-technical field
• Proficiency in Office, SAP and Excel software
• Knowledge of maintenance on production equipment in an industrial environment
• Electrical authorisations and CACES 1, 2 or 3 qualifications are an asset

Qualities

• Tenacity, rigour, pedagogy, curiosity, polyvalence
• Team spirit, analytical and synthetic spirit
• Ability to organise and manage priorities
• Continuous improvement and problem-solving
• Open-mindedness, integrity, respect, commitment

Benefits

• Competitive salary
• Comprehensive benefits package
• Opportunities for professional growth and development
• Collaborative and dynamic work environment
• Recognition and rewards for outstanding performance

XML job scraping automation by YubHub

The Adler Pelzer Group is a global leader in the design, engineering, and manufacturing of acoustic and thermal components and systems for the automotive sector. We have over 13,000 employees and approximately 100 manufacturing and R&D facilities worldwide.

Job Summary:

The HSE & Environmental Officer will be responsible for ensuring compliance with environmental and health and safety regulations, as well as promoting a positive and proactive approach to environmental management and health and safety within the organisation.

Responsibilities:

• Identify and pursue actions or problems reflected in PRL evaluations and reports, in accordance with legal requirements and identification of hazards or risks and environmental impacts.
• In coordination with HR, launch training activities in PRL and develop a training plan with HR:
• Identify training needs
• Define competencies by position
• Conduct internal and external communications.
• In coordination with SPA (External Prevention Service), have all workstations, work equipment, materials, etc. evaluated in accordance with current regulations.
• Supervise risk assessments carried out by the External Prevention Service, in coordination with this service.
• Launch annual and continuous preventive planning, according to detected risks and proposed improvements, leading the process in a proactive manner.
• Ensure compliance with legislation on coordination of business activities (CAE) of the plant.
• Part of the team, together with the Industrial Department and Projects, in the implementation of new machines, processes, substances, etc. in collaboration with SPA, OCA necessary.
• Supervise compliance with the law, as well as manage relationships and notifications of the plant with official bodies in matters of safety and health at work and the environment (town hall, generalitat, inspection, Invassat...).
• Promote and lead in a proactive manner, the positive evolution and compliance of an annual action plan for the Environment or an environmental programme, which guarantees compliance, continuous improvement, training and awareness in accordance with ISO14001.
• Lead the environmental emergency plan.
• Investigate accidents and incidents in matters of PRL and the Environment, and launch corrective and preventive actions as appropriate.

Requirements:

• University degree with a Master's degree in PRL (Safety, Ergonomics and Psychosocial) or University degree in PRL.
• Technical environmental studies.
• Extensive experience in the HSE area in a manufacturing environment.
• Environmental management (ISO14001).
• Prevention management (ISO 45001).
• Experience in the automotive industry will be valued.

XML job scraping automation by YubHub

Your key responsibilities will include:

Mission

• Promote a culture of HSE within your area of influence
• Identify, evaluate, and implement actions to control professional risks:
• Working conditions and ergonomics
• Safety of people
• Environmental protection
• Identify non-conformities, potential improvements, and manage associated risks with full knowledge
• Train and animate teams
• Manage action plans and track their indicators
• Be the point of contact for the DREAL during inspection controls
• Present HSE reports and action plans to meet objectives
• Ensure regulatory vigilance

As an HSE Coordinator, you will be the driving force behind maintaining a safe and healthy work environment. You will work closely with teams to identify and mitigate risks, and ensure that our site complies with all relevant regulations.

If you are passionate about creating a safe and sustainable work environment, we encourage you to apply for this exciting opportunity.

XML job scraping automation by YubHub

This role involves coordinating activities involved with procuring goods such as raw materials, tools, parts, supplies, and corresponding with vendors to ensure timely delivery, within budget, and meeting our high standards of quality.

Responsibilities:

• Process purchase requirements for various production materials
• Evaluate items for cost competitiveness and establish cost reduction programs
• Recommend new sources and suppliers, negotiating blanket purchase contracts to deliver products at the lowest total acquisition cost
• Interact with a diverse group of suppliers regarding quality discrepancies, requisitions, and PO variances
• Plan, modify, and reschedule purchase orders according to production schedules
• Develop and maintain Bills of Materials
• Assist with producing and scheduling production runs based on product demands
• Maintain the schedule and actively communicate changes to the production team on a routine basis

Requirements:

• Minimum of 5 years of experience as a Buyer/Planner
• High School or some college
• Excellent communication (written and verbal) ability
• Comfortable working under the pressure of time constraints
• Strong interpersonal skills with a well-balanced presence
• Strong mathematical skills
• Able to work on own and within a team environment
• Proficient in Microsoft Office (Excel, Word, Outlook) and MRP systems

XML job scraping automation by YubHub

At Valvoline Global Operations, we're proud to be The Original Motor Oil, but we've never rested on being first. Founded in 1866, we introduced the world's first branded motor oil, staking our claim as a pioneer in the automotive and industrial solutions industry.

Machine Operator/Material Handlers

We whole-heartedly adopt a 'never idle' mindset. We also know that outstanding service begins and ends with our employees. So, we're looking for good people to join our team. You bring your skills, talents, and drive. We will give you a great place to work, a competitive salary and benefits, and the resources and support to develop and advance within our global company.

Job Responsibilities

• Operate with a safety-first mindset
• Follow all standard operating procedures (SOPs)
• Ensure all quality standards are met (checking first piece on inbound packaging components, some in process testing of materials, and communication with lab team)
• Operate equipment up to efficiency standards (depalletizes, case conveyers, case packers, fillers, carton erecters, palletizers, wrappers, etc.)
• Performing routine preventative maintenance and inspections on packaging equipment and or PITs
• Maintain 5S standards (continuous cleaning of area while plant is operating)
• Operate powered industrial trucks
• Maintain cross training on multiple pieces of equipment
• Remaining up to date with safety, LMS, and ISO trainings
• Manual operations may include putting corrugated board on packaging lines, handling bottles or cases, pouch/bags and cleaning of equipment
• Employees will be trained and must utilize machine safety standards that will include control of hazardous energy, LOTO, and fortress keys
• Employees will be required to be engaged in additional safety programs which include but are not limited to PPE, ergonomics, PIT, and safety/environmental programs.
• Other duties and responsibilities as determined by Valvoline from time to time in its sole discretion.

What You'll Need

• High School Diploma or equivalent
• 2-3 years in manufacturing, distribution, or warehousing setting
• Experience working on a team to complete a common goal
• Experience operating machinery on a line
• RF Scanner experience is preferred
• SAP knowledge is preferred
• Forklift experience
• Handling/lifting of materials up to 50lbs multiple times per shift, bending down, the use of stairs, elevated platforms, ability to get on and off a powered industrial truck, and reaching for & placing of packaging components.

Benefits

• Health insurance plans (medical, dental, vision)
• HSA and flexible spending accounts
• 401(k)
• Incentive opportunity
• Life insurance
• Short and long-term disability insurance
• Paid vacation and holidays
• Employee Assistance Program
• Employee discounts
• Tuition reimbursement
• Adoption assistance

XML job scraping automation by YubHub

At Valvoline Global Operations, we're proud to be a pioneer in the automotive and industrial solutions industry. Founded in 1866, we introduced the world's first branded motor oil and have since become a global leader in our field.

Job Summary

The Manufacturing Lab Supervisor will support the day-to-day blending operation by maintaining the schedule, supervising the blending team, performing quality tests, and managing the ISO 9001 program.

Responsibilities

• Perform quality testing on inbound and outbound products and blends.
• Supervise blending personnel and lead project management for blending/bulk distribution.
• Quality Management Systems coordinator including ISO 9001 program.
• Maintain production schedule and purchase raw materials (bulk production and lab).
• Troubleshoot and repair equipment as well as maintain equipment maintenance intervals.
• Act as bulk inventory control coordinator.
• Other duties and responsibilities as determined by Valvoline from time to time in its sole discretion.

Requirements

• Minimum B.S. in Chemistry, Biology or Engineering but will consider Business.
• 2 years in a fast-paced manufacturing environment is preferred.
• Previous experience production scheduling and lean six sigma, a plus.
• Strong communication/presentation skills.
• Computer Skills - specifically Excel, Power Point, SAP and quality management software.
• Ability to periodically lift up to 50lbs during shift.

Benefits

• Health insurance plans (medical, dental, vision)
• Health Savings Account (with employer base deposit and match)
• Flexible spending accounts
• Competitive 401(k) with generous employer base deposit and match
• Incentive opportunity
• Life insurance
• Short and long-term disability insurance
• Paid vacation and holidays
• Employee Assistance Program
• Employee discounts
• PTO Buy/Sell Options
• Tuition reimbursement
• Adoption assistance

XML job scraping automation by YubHub

As a 2nd Shift Manufacturing Technician at FUCHS Lubricants Co., you will be part of a driven community focused on providing our customers with world-class solutions that help push our customers forward. You will be responsible for the care and maintenance of our clients' industrial fluids, including coolants, wash, and other liquids.

Responsibilities

• Operate and perform routine preventive maintenance on lubrication and fluid decantation systems, including filter changes and system cleanings
• Input data daily and generate performance reports
• Handle materials, operate lift trucks, and move drums and totes
• Make fluid corrections as needed based on testing results in the absence of the site leader
• Follow procedures and adhere to all customer and safety requirements
• Participate in daily communication meetings with site supervisor and communicate effectively

Qualifications

• High school diploma or equivalent required
• Standing and/or walking for approximately 4-8 hours daily
• Previous work experience working in manufacturing environment related to lubricants and/or laboratory testing preferred
• Basic computer knowledge and ability to navigate the internet and email
• Ability to lift up to 50lbs as well as standing and/or walking for approximately 4-8 hours daily
• Previous forklift experience is desired

Benefits

FUCHS offers a challenging and rewarding working environment where employees are encouraged to develop and grow as professionals. In this role, you will have the opportunity to work on projects that will expand your experience and challenge your abilities in the global marketplace. The position also offers an excellent compensation package and a comprehensive suite of benefits.

XML job scraping automation by YubHub

Responsibilities:

• Create a safety culture and apply and implement workplace policies
• Lead/coach skilled trades/maintenance personnel in all aspects of asset management, including asset availability, cycle time, preventative maintenance, predictive and condition-based monitoring technologies
• Build strong interpersonal relationships with hourly team members, union, and management teams
• Communicate effectively with hourly team members, leaders, business partners, and customers
• Administer the CBA consistently and effectively
• Evaluate team member performance and encourage continuous improvement

Note: This is a supplemental position and is not eligible for all benefits.

Qualifications:

• High School Diploma or GED
• 1+ years of supervisory and/or manufacturing experience
• Working knowledge in Microsoft: Excel, Word, PowerPoint, Outlook
• Ability to work rotating shifts and hours, including nights and weekends
• Fundamental working knowledge of PLC logic and controls
• Mechanical aptitude

Required Behaviors:

• Two-way communicator who actively listens to hourly team members, leaders, business partners, and customers
• Outstanding, interpersonal teambuilding and communication skills
• Values different opinions and is open to ideas and perspectives from others
• Highly committed to continuous improvement, while applying innovative solutions with a customer-first mindset
• Ability to maintain a high level of professionalism in difficult and stressful situations

Even better, you may have:

• Bachelor's Degree
• Safety and quality experience
• Six Sigma: Black or Green Belt certified
• Knowledge of constraint management principles
• Prior experience managing a unionized workforce

This position is a salary grade 7 and ranges from $84,480-141,360.

XML job scraping automation by YubHub

As an Hourly Production Team Member, you will be part of a team that assembles vehicles or vehicle components using materials and tools provided in a predefined order and process. You will be required to select, manipulate, and attach parts onto the vehicle or component using power or hand tools, hoists, or other equipment and machinery.

Responsibilities

• Willingness and ability to work on any assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance.
• Ability and willingness to learn and follow safety rules and procedures.
• Ability to perform manual labor, standing and walking much of the time, and with a certain amount of manual dexterity (the ability to pick up, handle, and manipulate) parts and materials quickly and accurately.
• Use hand, power tools, or scanners to install parts on vehicles or vehicle components or locating and obtaining parts for customer orders.
• Must be able to maneuver into, around, and about vehicles or components on an assembly line, or warehouse when performing stock keeping duties.
• Tasks may require a certain amount of reaching, twisting, bending, and use of a PMHV or hilo.
• Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks.
• Ability and willingness to understand and follow instructions, both oral or in writing.
• Ability to perceive differences in details, when inspecting parts or work performed, checking for defects or quality issues, or when distinguishing various parts/components by identification number or code.
• Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership.

Qualifications

• Successful completion of a pre-employment assessment, drug screen, physical and background check are required.
• Drug screen panel does not include THC.
• No interview is required.

Benefits

• Starting wage rate at $21.00 per hour plus applicable shift or crew premiums
• Immediate access to Best-in-Class Company provided healthcare!
• The National PPO plan is provided at no monthly premium to the employee.
• Prescription Drug Coverage
• Life Insurance Coverage - Eligible on first of the month after hire. Basic Life Insurance of $3,000 and Accidental Death and Dismemberment of $1,500
• Profit Sharing
• Holiday Pay after three months continuous employment
• Paid time off after 120 continuous days
• Supplemental Unemployment Benefits
• Tuition Assistance
• Immediate A, X, and Z Plan privileges – Vehicle purchase discount program

XML job scraping automation by YubHub

In this role, you'll conduct current-state and future-state Value Stream Mapping events at the process, department, and system levels. You'll document material and information flow, identify bottlenecks, and highlight improvement opportunities. You'll also support teams in developing actionable implementation plans based on VSM outcomes.

Responsibilities:

Value Stream Mapping

• Conduct current-state and future-state Value Stream Mapping events at the process, department, and system levels.
• Document material and information flow, identify bottlenecks, and highlight improvement opportunities.
• Support teams in developing actionable implementation plans based on VSM outcomes.

Continuous Improvement & Kaizen Support

• Assist in planning and facilitating kaizen workshops focused on quality, productivity, flow, safety, and standardization.
• Partner with operations teams to execute improvement actions identified through VSM and kaizen events.
• Track progress, remove roadblocks, and report results to leadership.

Data Analysis & Process Support

• Collect and analyze process data to validate improvement needs and measure impact.
• Support manufacturing teams with Lean tools such as 5S, standard work, problem-solving, and visual management.
• Maintain documentation and sustainment plans for continuous improvement activities.

Collaboration & Communication

• Work closely with plant leadership, engineers, team leaders, and other stakeholders
• Communicate findings clearly through presentations, reports, and visual tools.

Uphold Lean principles and assist in strengthening the continuous improvement culture across sites.

Qualifications:

• Expert in Lean tools such as 5S, kaizen, standard work, and root cause analysis.
• Experience participating in or co-facilitating VSM or kaizen events.
• Foundational value stream mapping experience in workshops and execution current and future state, Kaizen facilitation
• Strong knowledge of problem-solving and root cause analysis
• Kaizen application, facilitation and workshop execution experience
• Bachelor’s degree in Applied Science, Engineering, or Industrial Technology
• 2 or more years of experience in a manufacturing environment (automotive experience preferred).
• Ability to analyze processes, interpret data, and identify improvement opportunities.
• Strong communication, facilitation, and interpersonal skills.
• Willingness to travel up to 50–65% to support multiple manufacturing sites.

Benefits:

• Immediate medical, dental, vision and prescription drug coverage
• Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more
• Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
• Vehicle discount program for employees and family members and management leases
• Tuition assistance
• Established and active employee resource groups
• Paid time off for individual and team community service
• A generous schedule of paid holidays, including the week between Christmas and New Year’s Day
• Paid time off and the option to purchase additional vacation time.

This position is a salary grade 8 and ranges from $96,720-162,120.

XML job scraping automation by YubHub

You will utilize machining process knowledge, particularly steel and iron metal cutting and grinding to deliver an efficient and optimized process regarding quality, costs, timing, and footprint.

Responsibilities include leading equipment installation, power on, run capability, and equipment handover to the powertrain plants, as well as initiating bids, evaluating, and recap bids for equipment purchase.

You will work with OEMs, suppliers, Product, and Plant engineering teams to resolve engineering and program delivery issues, and interface and coordinate project related items such as facilities, safety, ergonomics, material handling & kitting, tooling, and gauging.

You will also support discrete event simulation for constraint analysis, and work with Industrial Engineers (IE) to assess and improve throughput.

Travel up to 100% to SE Michigan and Ohio Manufacturing Plants during equipment installation and launch.

Qualifications include a Bachelor of Science in Engineering, 3+ years of engineering and manufacturing experience in gears or round parts, and ability to travel domestically - up to 50%.

Even better, you may have working knowledge of GD&T, reading engineering drawings, strong communication skills, and strong organization skills with the ability to handle complex projects with multiple objectives.

XML job scraping automation by YubHub

As an Hourly Production Team Member, you will be part of a team that builds vehicles that are known for their quality and reliability. You will work in a fast-paced environment, with a focus on safety and efficiency. Your role will involve working on the production line, ensuring that vehicles are built to the highest standards.

Responsibilities:

• Work on the production line, building vehicles to the highest standards
• Ensure that all vehicles meet quality and safety standards
• Work collaboratively with other team members to achieve production goals
• Participate in training and development programs to improve skills and knowledge

Qualifications:

• High school diploma or equivalent required
• Ability to work in a fast-paced environment
• Strong communication and teamwork skills
• Ability to lift up to 50 pounds

Benefits:

• Competitive hourly rate
• Healthcare coverage on your first day
• Opportunities for advancement and career growth
• Recognition and rewards for outstanding performance

XML job scraping automation by YubHub

The Production Supervisor position is a supervisory leadership role that requires on-the-job training, development, and opportunity for career progression. Production Supervisors are expected to be resilient, detail-oriented, ambitious, and demonstrate high integrity.

Responsibilities

• Coach Safety, Quality and Productivity to ensure objectives are met through following standardized work
• Optimize throughput in accordance with budgets and cost objectives
• Monitor ANDON occurrences and provide secondary support
• Verify that the line is running safely, smoothly, and producing quality parts through Process Confirmation
• Support Kaizen (Continuous Improvement) and coach problem resolution to the lowest level
• Communicate and recognize team members
• Meet FTT, inventory, cost, scrap, supply, and tooling expense targets
• Build Team Leader and Team Member capability
• Create a conducive work environment for the team(s) to complete their assigned responsibilities/tasks
• Perform basic administration of supervisory responsibilities and documents

Qualifications

• High School Diploma or GED Required
• 1+ years of supervisory and/or manufacturing experience
• Body shop/stamping/paint/subassembly experience preferred
• Ability to work any shift, rotating shifts, and weekends
• Ability to work independently with limited supervision
• Capable of assigning work to unionized hourly workforce and holding employees accountable for following processes pertaining to daily work assignments in terms of safety, quality, and throughput
• Strong organizational and administrative skills
• Ability to multi-task
• Strong problem-solving and conflict management skills
• Successful candidate must be able to demonstrate leadership in One FORD (leadership) behaviors combined with outstanding interpersonal, teambuilding, and communication skills

Benefits

• Immediate medical, dental, and prescription drug coverage
• Flexible family care, parental leave, new parent ramp-up programs, subsidized back-up childcare, and more
• Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
• Vehicle discount program for employees and family members, and management leases
• Tuition assistance
• Established and active employee resource groups
• Paid time off for individual and team community service
• A generous schedule of paid holidays, including the week between Christmas and New Year’s Day
• Paid time off and the option to purchase additional vacation time

Visa Sponsorship

Visa sponsorship is not available for this position.

Employment Eligibility

Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

XML job scraping automation by YubHub

Responsibilities

As a Lead Production Supervisor, you will be responsible for driving safety, quality, cost, delivery, people, maintenance, and environmental issues by understanding and consistently applying standard manufacturing operating system processes. You will validate and bridge operational needs to ensure the line is running safely, smoothly, and producing quality parts.

Safety

• Ensure department compliance with government, industry, and corporate standards
• Review department safety metrics and coordinate improvement activities

Quality

• Direct data-driven maintenance processes to improve quality metrics (e.g., higher FTT, less scrap, less contamination, etc.)
• Devise and implement strategy to tighten tolerances within specifications for fit, form and functionality

Delivery

• Coordinate the resources and activities required to ensure problem free start-ups
• Facilitate start-up/shift-to-shift meetings

Cost

• Promote and ensure continuous improvement in the manufacturing engineering organization toward the common goal of improving product quality, plant competitiveness and total cost structure
• Monitor, control, and improve Maintenance Cost Per Unit (MCPU)
• Optimize throughput in accordance with budgets and cost objectives: meet or beat schedule
• Manage and support material control (spare part inventory), repair and rebuild programs, and reliability and maintainability reviews

People

• Supervise salaried employees
• Build Team Leaders’ and Team Members’ capabilities; mentor subordinates
• Basic Administration of supervisory responsibilities and documents

Maintenance

• Lead all daily, weekend and shutdown maintenance planning with input from your team(s)
• Integrate the maintenance plan into total department business plan
• Use Maximo to analyze data and evaluate the effectiveness of the preventive maintenance plan

Environment

• Ensure department compliance with government, industry, and corporate standards

Qualifications

Minimum Requirements

• Education: High School Diploma
• Experience: 1-2 years technical work experience and troubleshooting in a Manufacturing environment
• Fundamental working knowledge of PLC logic and controls
• Ability to work any shift as well as rotating shifts and weekends

Preferred Requirements

• Education: Bachelor’s Degree in Electrical or Mechanical Engineering
• Experience: 3-5 years automotive experience
• Body shop/stamping/paint/subassembly experience preferred
• Knowledge of Lean Manufacturing principles
• Knowledge of constraint management principles
• Safety and Quality experience preferred
• Microsoft Office knowledge (Word/Excel/Outlook)
• Prior experience managing a unionized work force
• CNC machining experience (PTO specific)
• Helium leak stand experience (PTO specific)

Benefits

You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!

As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including:

• Immediate medical, dental, and prescription drug coverage

• Flexible family care, parental leave, new parent ramp-up programs, subsidized back-up child care and more

• Vehicle discount program for employees and family members, and management leases

• Tuition assistance

• Established and active employee resource groups

• Paid time off for individual and team community service

• A generous schedule of paid holidays, including the week between Christmas and New Year’s Day

• Paid time off and the option to purchase additional vacation time.

XML job scraping automation by YubHub

Responsibilities:

• Use and have a thorough understanding of Six Sigma (Black Belt Certified requirement), Lean and Problem-Solving Methodologies and Ford Production System (FPS) approach to improve all areas of the business
• Implement and lead Ford NA Six Sigma strategy within manufacturing plant
• Coach Plant OCM and Green belts in strategic problem solving and Six Sigma methodologies
• Coach, lead and assist problem solving teams at Ford facilities and suppliers
• Teach Six Sigma Green Belt classes and help prepare students for certification
• Coach and teach Ford Production System methods including standards and project selection
• Coach and mentor Green Belts to use 6 Sigma tools properly and complete projects
• Run 6 Sigma Kaizen projects to support resolution of significant issues
• Lead 6 Sigma continuous improvement projects to resolve significant issues
• Liaison with other business units on best practices and 6 Sigma knowledge
• Support implementation of Ford Production System standards and continuous improvement tools
• Drive implementation of continuous improvement methodology and sustainability strategies with plant leadership
• Provide Ford Production System assistance and training to the plant as required
• Coach and teach Ford Production System methods including standards and project selection.

Additional Duties:

• Confirm standards are in place
• Support issues raised by the teams
• Plan changes to the system
• Manage changes to the system
• Communication and Recognition
• Develop highly competent and motivated people
• Create a conducive work environment for the team(s) to complete their assigned responsibilities / tasks
• Ensure completion of administrative responsibilities
• Supervise salaried employees

Qualifications:

• Education: High School Diploma
• Black Belt Certified
• Experience: 2-3 years’ experience as a Process Coach
• Ability to work any shift as well as rotating shifts and weekends
• Ability to work independently with limited supervision
• Capable of assigning work to unionized hourly workforce and holding employees accountable for following processes pertaining to daily work assignments in terms safety, quality, and throughput
• Strong organisational and administrative skills
• Ability to multi-task
• Strong problem-solving and conflict management skills
• Successful candidate must be able to demonstrate leadership in One FORD (leadership) behaviours combined with outstanding interpersonal, teambuilding, and communication skills

Even better, you may have:

• Education: Bachelor’s Degree
• Experience:
  • Body shop/stamping/paint/subassembly experience preferred
  • Safety and Quality experience preferred
  • Knowledge of Lean Manufacturing Principles
  • Knowledge of constraint management principles
  • Microsoft Office knowledge (Word/Excel/Outlook)
  • Prior experience managing a unionized workforce
• Knowledge of Lean Manufacturing Principles
• Knowledge of constraint management principles
• Microsoft Office knowledge (Word/Excel/Outlook)
• Prior experience managing a unionized workforce

XML job scraping automation by YubHub

Responsibilities:

• Weighing and/or metering raw materials into mixing tank.
• Mixing raw materials into mixing tank to make finished product.
• Transferring finished product from mixing tank into proper shipping container.
• Regular inspections of the ball mills.
• Reviewing of the batch tickets to determine the type and quantity of graphite to be ground.
• Following standard operating procedures for loading and unloading the ball mills.
• Verification of raw material consumption via SAP.

Qualifications:

• High school diploma or equivalent.
• Two plus years of previous manufacturing/plant operations experience required.
• Demonstrated ability to follow simple batch ticket instructions.
• Work with limited supervision and perform basic mathematical calculations.
• Batch making and/or compounding experience a plus.
• SAP experience a plus.

What You'll Get:

• A dynamic, supportive team environment
• Competitive pay and shift differential
• Comprehensive benefits package (details here: https://fuchs.com/us/en/benefits)
• Career growth in a global company that values your ideas and initiative

XML job scraping automation by YubHub

We are seeking a Maintenance Supervisor to join our Manufacturing team at Ford Motor Company. As a Maintenance Supervisor, you will be responsible for leading and coaching skilled trades and maintenance personnel in all aspects of asset management, including asset availability, cycle time, preventative maintenance, predictive and condition-based monitoring technologies.

Responsibilities

What You'll Do...

• Create a safety culture and apply and implement workplace policies
• Lead/coach teams in leveraging new and existing machine monitoring tools to identify constraints in the system and systematically reduce and eliminate interruptions in production flow
• Build strong interpersonal relationships with hourly team members, union, and management teams
• Communicate effectively with hourly team members, leaders, business partners, and customers
• Administer the CBA (collective bargaining agreement) consistently and effectively
• Evaluate team member performance and encourage continuous improvement

Qualifications

You'll Have...

• High School Diploma or GED
• 1+ years of supervisory and/or manufacturing experience
• Working knowledge in Microsoft: Excel, Word, PowerPoint, Outlook
• Ability to work rotating shifts and hours, including nights and weekends
• Fundamental working knowledge of PLC logic and controls
• Mechanical aptitude

Required Behaviors

• Two-way communicator who actively listens to hourly team members, leaders, business partners, and customers
• Outstanding, interpersonal teambuilding and communication skills
• Values different opinions and is open to ideas and perspectives from others
• Highly committed to continuous improvement, while applying innovative solutions with a customer-first mindset
• Ability to maintain a high level of professionalism in difficult and stressful situations

Even Better, You May Have...

• Bachelor's Degree
• Safety and quality experience
• Six Sigma: Black or Green Belt certified
• Knowledge of constraint management principles
• Prior experience managing a unionized workforce

Benefits

As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including:

• Immediate medical, dental, and prescription drug coverage
• Flexible family care, parental leave, new parent ramp-up programs, subsidized back-up child care and more
• Vehicle discount program for employees and family members, and management leases
• Tuition assistance
• Established and active employee resource groups
• Paid time off for individual and team community service
• A generous schedule of paid holidays, including the week between Christmas and New Year's Day
• Paid time off and the option to purchase additional vacation time.

Salary

This position is a salary grade 7 and ranges from $84,480-141,360.

XML job scraping automation by YubHub

Responsibilities include leading a team of analysts, managing Global HS Classification & Customs Operations / Trade Compliance for IMG markets, building strong relationships with Internal Legal, Tax & Finance departments, and collecting & sharing market intelligence about global trade scenarios impacting duty rates & classifications.

The role also involves connecting with Global teams, supporting initiatives towards achieving Functional Alignment, focusing on people training, upskilling, developing backups & support on cross-functional assignments, and recognising, rewarding and motivating the team.

Additionally, the role requires periodic review of Global Classifications / Customs Rules across Countries / Report Submission, Permit / License applications, Customs Privileges, to assess right duties / taxes, managing Customs Operations remotely and effectively with special focus on Priorities, duty payments, deliveries tracking with carriers / CHB’s, and coordinating with Tax, Finance, Supply Chain, Logistics function, plant-based teams on various aspects related to Custom Operations, duties, taxes, forecast reviews, budget, etc.

The role also involves FTA Analysis on eligible parts, further study & report out on RVC validation, managing regulatory changes on Rules, trade notices, circulars, notifications with possible impact assessment, and trade incentives, and implementing as required SVB regulations, procedures, Valuation & transfer pricing.

The role requires identifying opportunities to improve trade duty competitiveness, minimise compliance risks, and reduce costs ensuring adhering to statutory rules, overseeing Customs Broker PO utilisation, coordination with Purchase, & Finance for timely renewals, ensuring no delay in document filing and Nil Customs Penalty / incremental cost, and constant focus on Container placements, Inland transportation, vessel connectivity to avoid detention / port demurrage charges.

Controls & Quality include adequacy of controls for all critical classification processes / Customs operations via periodic audit & report out, coordinating closely with external consultants on audits of the classification & implementation of necessary corrective actions till closure, mitigating risks related to cross-border transactions, identifying potential compliance gaps, assessing their impact, and developing strategies to minimise risk exposure.

The role also involves fostering a compliance culture throughout the organisation by emphasising its importance & proactively driving trade compliance to deliver competitiveness E2E, leading Governance / KPI’s reviews on HS Classification & Operations & process improvement, leveraging digital tools for efficient compliance management, understanding customs automation systems, data analytics, and risk assessment software, and leveraging a digitalised and transparent data value chain to regulatory changes and capture trade opportunities.

Technology involves supporting IT requirements for global customs to deploy tools / systems / best business practices, and ability to represent with Customs Officials / Higher authorities on queries, disputes, management of workforce with diverse responsibilities / work locations, and comfortable with handling multi-level of communications and interfaces.

XML job scraping automation by YubHub

Responsibilities:

• Cycle counting to ensure accurate inventory levels
• Sticker and labeling of products for easy identification
• Construction of coolers to store temperature-sensitive materials
• Preparation of supplies for distribution
• Management of supplies to ensure efficient use
• Disposal of garbage in accordance with GMP processes
• Staging of materials for destruction
• Receipt of supplies
• Special projects as assigned
• Assist with conduct of Special Security Substances (SSS) Inventories

Keywords provides a competitive compensation package, good benefits and a casual, fun, productive and supportive working environment. We empower people to perform to the best of their ability with our “can do” attitude. We appreciate and embrace flexibility and learn at every opportunity to grow ourselves through experience, training and tackling new challenges.

This is what makes us Keywordians.

Requirements:

• Strong organization and multi-tasking ability
• Experience with inventory management, preferably in a clinical trial setting
• Good communication skills
• Ability to work in a collaborative team environment
• Strong attention to detail
• Willingness to pick orders up to 25 feet on forklift and cherry picker (training will be provided)
• Experience in a regulated industry, preferably pharmaceutical
• Ability to bend and lift 50 pounds
• Ability to stand for 8 hours daily
• High school diploma
• Basic computer skills
• Demonstrate high productivity with minimal supervision
• Proficiency in inventory software, databases and systems highly desirable
• Ability to work up to 8 hours in 42 degrees

Benefits: Keywords provides all its contingent workforce with:

• Medical, dental and vision benefits
• Paid time off (including sick and select holidays)
• 401(k) enrollment with 3% employer matching

We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law

XML job scraping automation by YubHub

Responsibilities:

• Lead guided plant tours for Ohio University students
• Introduce students to Honda's manufacturing operations, including engineering and production
• Facilitate Q&A sessions with Honda engineers and Talent Acquisition leaders

Benefits:

• Opportunity to work with a global leader in the automotive industry
• Develop skills in event planning and leadership
• Gain insights into Honda's culture, innovation, and career pathways

XML job scraping automation by YubHub

Job ID : 10289

We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success.

Job Purpose

The Assembly Zone Leader is responsible for coordinating a specific Zone on an assembly line which produces both domestic and foreign products. Timely delivery of quality products enables North Carolina Manufacturing and other Honda factories to produce quality products for our customers.

Key Accountabilities

• Review and report production results quarterly. Identify areas of improvement, determine root cause of issues, and establish plan for improvement and implement.
• Arrange and adjust manpower throughout the day in responsible zone and communicate issues/concerns to Team Coordinator/Process Staff to ensure all processes have enough to staff to build the product safely and with high quality.
• Completes daily check sheets for Safety, Equipment, and Quality to ensure timely delivery of products to the customer.
• React quickly to make adjustments that impact aspects of Safety, Quality, and/or Delivery of product to the customer.
• Confirm daily production plan and communicate with production associates to ensure production targets are achieved.
• Confirm and arrange work area during model changeover to ensure downtime is minimized and product is built correctly.
• Confirm production areas are complying to safety standards of North Carolina Manufacturing Plant.

Qualifications, Experience, and Skills

Minimum Experience:

• 1+ years manufacturing related experience

Other Job-Specific Skills:

• Skill leading a small group of associates
• Thorough understanding of assembly concepts and processes
• Critical thinking and problem-solving skills

Working Conditions

• Majority of time is in production environment
• 10 hours overtime per week is possible
• Occasional weekend work

Total Rewards

• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth

• Advancement Opportunities
• Career Mobility
• Education Reimbursement for Continued Learning
• Training and Development programs

Additional Offerings

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

XML job scraping automation by YubHub

Key responsibilities include:

• Operating forklifts to move materials and products
• Managing inventory levels and ensuring accurate shipping and receiving
• Maintaining a safe and clean work environment
• Collaborating with team members to achieve production goals

We offer a competitive salary range of $26.60 - $34.19 per hour, as well as benefits and growth opportunities. If you're looking for a challenging and rewarding role, apply today!

XML job scraping automation by YubHub

Key Accountabilities

• Have knowledge and competency of all processes in assigned zone to quickly fill any position for various reasons (absenteeism/paid time off/emergency relief).
• Support completion of daily check sheets for Safety, Equipment, and Quality to ensure timely delivery of products to the customer.
• React quickly to make adjustments that impact aspects of Safety, Quality, and/or Delivery of product to the customer.
• Confirm daily production plan and communicate with production associates to ensure production targets are achieved.
• Confirm and arrange work area during model changeover to ensure downtime is minimized and product is built correctly.
• Confirm production areas are complying to safety standards of the North Carolina Manufacturing Plant.

Qualifications, Experience, and Skills

• Minimum 1+ years manufacturing related experience
• Skill leading a small group of associates
• Thorough understanding of assembly concepts and processes
• Critical thinking and problem-solving skills

Working Conditions

• Majority of time is in production environment
• 10 hours overtime per week is possible
• Occasional weekend work

Total Rewards

• Competitive Base Salary ($26.78 per hour)
• Paid Overtime
• Regional Bonus (when applicable)
• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)
• Paid time off, including vacation, holidays, shutdown
• Company Paid Short-Term and Long-Term Disability
• 401K Plan with company match + additional contribution
• Relocation assistance (if eligible)

Career Growth

• Advancement Opportunities
• Career Mobility
• Education Reimbursement for Continued Learning
• Training and Development programs

Additional Offerings

• Tuition Assistance & Student Loan Repayment
• Lifestyle Account
• Childcare Reimbursement Account
• Elder Care Support
• Wellbeing Program
• Community Service and Engagement Programs
• Product Programs

XML job scraping automation by YubHub

Your duties will include:

• Operating and maintaining all equipment and machinery in the production of plastic packaging
• Handling and processing raw materials and repromaterials
• Controlling production parameters and ensuring quality of finished products
• Managing inventory and supplies
• Maintaining a clean and organized work environment
• Performing routine maintenance and repairs on equipment and machinery
• Participating in the replacement of tooling on machines
• Operating an electro saw when authorized and trained to do so
• Performing other tasks as required by supervisors

You will also be responsible for:

• Operating and maintaining equipment and machinery in the production of industrial and motor oils
• Handling and processing raw materials and repromaterials
• Controlling production parameters and ensuring quality of finished products
• Managing inventory and supplies
• Maintaining a clean and organized work environment
• Performing routine maintenance and repairs on equipment and machinery
• Participating in the replacement of tooling on machines
• Operating an electro saw when authorized and trained to do so
• Performing other tasks as required by supervisors

You will also be responsible for:

• Operating and maintaining equipment and machinery in the production of lubricants and special lubricants
• Handling and processing raw materials and repromaterials
• Controlling production parameters and ensuring quality of finished products
• Managing inventory and supplies
• Maintaining a clean and organized work environment
• Performing routine maintenance and repairs on equipment and machinery
• Participating in the replacement of tooling on machines
• Operating an electro saw when authorized and trained to do so
• Performing other tasks as required by supervisors

You will also be responsible for:

• Maintaining accurate and up-to-date records and documentation of quality control systems
• Ensuring compliance with all relevant regulations and standards
• Participating in training and development programs
• Performing other tasks as required by supervisors

You will also be responsible for:

• Handling and processing hazardous and dangerous materials
• Following safety procedures and guidelines
• Participating in training and development programs
• Performing other tasks as required by supervisors

You will also be responsible for:

• Performing other tasks as required by supervisors

Apply now

XML job scraping automation by YubHub

Work in the assembly area, building brake components for OEM and motorsport customers.

Key Responsibilities

Work in a team environment to build brake components in line with quality and safety guidelines. Read manufacturing specifications to ensure components are built correctly. Identify and manage scrap, reject & sample materials, and participate in the QIS procedure. Suggest improvements to Quality and H&S processes. Maintain attention to detail in a high-volume throughput area. Comply with and support the Quality & Environmental Management Systems. Follow manual handling procedures at all times.

The Candidate

Previous assembly skills, ability to read English manufacturing specs, and use hand assembly tools (torque wrenches etc). Basic measuring equipment skills are also required. A FLT License is preferred but not essential. Self-motivation, good communication and problem-solving skills, numeracy, and flexibility in working hours are also necessary.

Hours

Monday to Thursday: 07.00 – 16.00, Friday: 07.00 – 12.00.

Rewards and Benefits

Competitive salary, 25 days annual leave plus bank holidays, pension contribution, life insurance, eye care assistance, cycle to work scheme, company events, wellbeing incentives, enhanced maternity and paternity pay, online GP service, employee assistance package, and Christmas gifts.

XML job scraping automation by YubHub

Apply

locationsEast Gwillimbury, Ontario

time typeFull time

posted onPosted 6 Days Ago

job requisition idJR102775

Job Summary

We are seeking a Production Operator to join our team. As a Production Operator, you will be responsible for operating drilling, riveting, staking, tapping, welding, and other production machinery. You will also be responsible for checking fixtures and measuring and gauging equipment to test and determine compliance to customer requirements.

Responsibilities

• Operation of drilling, riveting, staking, tapping, welding, and other production machinery either automatic or manually operated as assigned.

• Use of checking fixtures and measuring and gauging equipment to test and determine compliance to customer requirements.

• Responsible for the counting and labelling of finished components and the recording of all appropriate production information.

• Ensure that accurate information is entered into the inventory system.

• Record trends on appropriate forms (i.e. lot control forms, production reports).

• Check assemblies to fixtures, gauges, tools or visual inspection aids as outlined in the CP (i.e. inspection instructions, operator instructions).

• Identify any concerns relative to productivity, quality, or safety.

• Perform maintenance tasks including tip changes, tool changes, and set-up of equipment.

• Perform finished goods inspections as per the control plan and operator instructions as required.

• In the event of nonconformance, halt the operation and inform the leadhand or supervisor.

• Ensure that non-conform material is identified with a reject tag or placed in the reject container.

• Ensure that the work area and machinery is clean and safe at all times.

• Follow all departmental and general procedures where applicable.

Requirements

• Previous experience in a manufacturing environment preferred but not essential.

• Ability to follow instructions, both written and verbal.

• Previous experience working in a team environment.

• Demonstrated mechanical aptitude is an asset.

• Detail oriented.

Applicants must be willing to work the afternoon or night shift.

Benefits

• Competitive salary range: $21.14 - $30.19

• Opportunities for career growth and development

• Comprehensive benefits package

• Paid time off and holidays

How to Apply

If you are interested in this position, please submit your cover letter and resume to [insert contact information]. We thank all interested candidates in advance; however, only individuals selected for interviews will be contacted.

Accommodations

As part of our commitment to ensuring our employment practices are fair, accessible, and inclusive of persons with disabilities, recruitment-related accommodations for disabilities, are available upon request throughout the recruitment and assessment process for applicants with disabilities.

XML job scraping automation by YubHub

Apply

THIS IS A 2nd SHIFT POSITION

SUMMARY

Maintains all equipment and facilities. Performing all PM checks and procedures as scheduled. Assist with set up and change over’s.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Must adhere to all Multimatic New Haven Safety practices, policies & procedures

• Machine diagnostics/trouble-shooting & repair

• Machine installation & set up procedures

• Perform welding & fabrication as needed

• Perform preventative maintenance (PM’s) procedures related to all manufacturing equipment

• Perform all facility related repairs and/or project work as assigned

• Responsible for completing and turning in all maintenance related documentation including but not limited to daily log sheets for TPM’s and all required Control Plans and Downtime logs

• Coordinate with other resources (Supervisors/Managers) time, material and equipment required to perform necessary work as needed

• Must be self-driven; with minimal supervision

• Have or acquire all hands tools to perform the job

QUALIFICATIONS AND REQUIREMENTS

XML job scraping automation by YubHub

Apply

locations Butler, Indiana

time type Full time

posted on Posted 2 Days Ago

job requisition id JR102798

KEY RESPONSIBILITIES

• Perform Weld Repair on metal components using MIG methods
• Use of checking fixtures and other measuring and gauging equipment to test and determine compliance to customer requirements.
• Responsible for counting and labelling of finished components and the recording of all appropriate production information.
• Enter accurate information into inventory system using bar coding scanners as required
• Ensure all production paperwork is filled out accurately and on-time
• Ability to follow oral and written instruction, and provide clear communication to co-workers and supervision
• Responsible to check assemblies to fixtures, gauges, tools or visual inspection aids (i.e. inspection instructions, operator instructions etc.)
• Follows Control Plans and works in accordance with Company, Quality & Safety specifications
• Ensures work area and machines are clean and safe at all times.
• Responsible for pointing out problems and concerns on quality, productivity or safety related matters.
• Performs minor maintenance tasks such as tip changes, tool changes, and set-up of equipment.
• Performs finished goods inspection per control plan and operator instructions
• Work in a safe manner at all times
• Works in compliance with IATF(formerly TS 16949) and ISO14001 standards.

BASIC REQUIREMENTS

• Interested to work on 3rd shift.
• Minimum of a high school diploma or general education degree (GED)
• Experience with MIG Welding
• Holds an AWS Certification is a plus.
• Two (2) years related experience in an automotive manufacturing or similar manufacturing environment is a plus
• The ability to safely operate any and all equipment as necessary
• Demonstrate the ability to work as part of a team or on single operations
• Strong attention to detail and accuracy
• Must be flexible with working hours
• Ability to read, write and speak English

TRAINING/DISQUALIFICATION

• Associates, who receive a job transfer/promotion will be trained and evaluated in their new position. The actual length of training is dependent upon the position/job assigned and the individuals’ ability to learn and perform the required duties.
• During the training period, the associates’ performance typically will be evaluated and a performance evaluation completed at 30, 60 and 90-day intervals. Criterion utilized for the performance evaluation process may include but is not limited to: compliance with safety and quality standards/procedures, job knowledge, dependability/adaptability, resourcefulness, team work, productivity, and housekeeping 6S.
• If an individual needs further training or improvement at the conclusion of the 90-day evaluation period the training/job evaluation period may be extended an additional 30 days. Promoted/transferred individuals are expected to maintain a satisfactory level of performance in all areas of evaluation. Failure to do so may result in disqualification from the classification/position.
• If, during the 90-day training period, an associate is unable to perform to level expected by the Company or resigns from a position, the associate may not be eligible for reapplying for the same position without demonstrating an improvement of their skill and ability from consideration for that position for one (1) year, and will return to their previously held position; seniority and availability permitting. If they do not have the seniority to hold their previous position, they will be assigned to another available position as needed, provided they can successfully perform the work. A disqualification and/or resignation from any job award, may affect an individuals’ future promotional considerations.

EDUCATION and/or EXPERIENCE

• High school diploma or general education degree (GED). One to three months related experience and/or training or the equivalent combination of education and experience. The ability to safely and effectively operate machinery; and material handling equipment within orientation period. The ability to pass post examinations for position required training.

LANGUAGE SKILLS

• The ability to read and comprehend written work instructions. The ability to write effective correspondence. The ability to write and interpret work instructions and work procedures. The ability to effectively present information in one-on-one and small group situations. Effectively represent the company professionally to customers, suppliers and other associates within the organization.

MATHEMATICAL SKILLS

• The ability to add and subtract three digit numbers, multiply and divide. The ability to use and accurately read micrometers, dial calipers, digital indicators, tape measure, feeler gages, and taper gages in standard and metric measurements.

REASONING ABILITY

• The ability to define problems, collect data, establish facts, and draw valid conclusions.

PHYSICAL DEMANDS

XML job scraping automation by YubHub

We are seeking a skilled Leather Glove Cutter to join our team at Alpinestars. As a leading global performance motorsports apparel, protection and footwear manufacturer, we are in a powerful growth phase in the global market, reflecting the strengthening of our staff.

Position

The successful candidate will be responsible for:

• Realisation and confection of leather gloves;
• Hand-stitching and use of linear and column sewing machines;
• Precision sartorial work on leather.

Requirements

• Previous experience in the confection of leather gloves;
• Excellent competence in the use of linear sewing machine, column sewing machine;
• Considered a plus the use of cutting machine and two needles;
• Requested availability for overtime.

Benefits

• Competitive salary;
• Opportunity to work with a leading global performance motorsports apparel, protection and footwear manufacturer;
• Collaborative and dynamic work environment.

Other information

• Working hours: 8-12/12.30-16.30;
• Location: Asolo (TV);
• Login Password Recovery.

XML job scraping automation by YubHub

WRT Manufacturing est une PME, située à Bierset (Liège), active dans le secteur du sport automobile. La société fait partie du groupe WRT.

WRT Manufacturing n’est pas seulement un atelier de soudure mais aussi un bureau d’études pour la conception de pièces, châssis, etc...

Vous êtes à la recherche d’un nouveau défi ? Vous aimez le travail de précision et sur mesure ? Vous êtes créatif, orienté résultat et méticuleux ?

Pour renforcer l’équipe, nous sommes à la recherche d’un CARROSSIER-TOLIER-SOUDEUR:

Vous serez en charge de :

• Couper et poser de nouveaux éléments de carrosserie acier ou composite.
• Préparation de la tôlerie avant la mise en peinture.
• Débosseler, planer et former de la tôle.
• Ajuster des éléments de carrosserie.
• Soudage MIG/TIG sur tôlerie fine.

Le candidat doit posséder les compétences suivantes :

• Approche pratique avec une attitude flexible "Can Do" et "Will Do".
• Flexible avec la charge de travail et les délais serrés.
• Connaissance du français requise.
• Proactif dans la résolution de problems.
• Promouvoir nos valeurs (People, Passion, Performance) et s'engager à s'investir personnellement dans la stratégie ESG de WRT.

• ## Apply now!

XML job scraping automation by YubHub

The duties of the Head of Manufacturing will include:

• Lead manufacturing operations (roll cage production, paintshop and assembly).
• In charge of expansion into similar services and adding additional services in line with strategy.
• Develop and execute production strategies aligned with business goals.
• Own and manage manufacturing budgets and full P&L responsibility.
• Drive continuous improvement and implement lean manufacturing principles.
• Collaborate with engineering, supply chain, and operations to ensure product quality and timely delivery.
• Build, lead, and mentor a high-performing manufacturing team.
• Report directly to the CEO on performance metrics, strategic initiatives, and operational challenges.
• Ensure compliance with safety, quality, and environmental standards.

The Head of Manufacturing should have the following desired skillset:

• Minimum 10 years of experience in manufacturing and operations leadership, within motorsport or automotive sectors.
• Experience in business development and client management.
• Proven track record in managing complex production environments and budgets.
• Strong understanding of motorsport technologies and vehicle manufacturing processes.
• Excellent leadership, communication and team management skills.
• Strategic thinker with a hands-on approach.
• Fluent in English and French, additional languages are a plus.
• Customer orientated.
• Promote WRT values (People, Passion, Performance) and commit to personal investment into the WRT ESG strategy

XML job scraping automation by YubHub

Type: Full-Time

Location: Bahrain, Sakhir

Qualification and Skills Required:

1. Graduate or Diploma certificate holder.
2. Minimum 5 years of experience in a related field.
3. Strong communication and troubleshooting skills.
4. Fluent in written and spoken English.
5. Willing to work extra hours when needed.
6. Patient and solution-oriented under pressure.

Key Responsibilities includes but not limited to:

1. Coordinate with other departments to streamline the production process.
2. Oversee screen preparation, color mixing, and screen-printing machine operations.
3. Monitor the quality of decal printed sheets and troubleshoot printing issues.
4. Supervise chemicals inventory and ensure proper handling and storage.
5. Maintain and monitor key equipment.
6. Ensure accurate color matching and uphold HSE standards across the department.

Manage ERP systems, inventory tracking, and project reporting for smooth operations.

XML job scraping automation by YubHub

What you'll do

• Operate and maintain equipment for filling and packaging lubricants
• Perform tasks related to the production process

What you need

• Ability to work in a team
• Good communication skills
• Ability to work in a fast-paced environment

Why this matters

This role is a great opportunity to join a dynamic and growing company and contribute to the success of our team. We offer a competitive salary and benefits package, as well as opportunities for professional growth and development.

XML job scraping automation by YubHub

What you'll do

• Creates, develops, and writes visual content
• Creates motion graphics, and interactive virtual training processes for optimal usability

What you need

• 3 to 4 years of manufacturing experience
• 1 year of training and/or leadership experience

XML job scraping automation by YubHub

FUCHS Lubricants Benelux N.V. / S.A. are looking for a talented Production Operator at their Huizingen office. This role sits at the heart of the production process, ensuring the efficient and accurate preparation and application of lubricants. You'll work directly with the production team to maintain a smooth and organized workflow.

About the Role

As a Production Operator, you will play a crucial role in the production process of lubricants. You will be responsible for the preparation and application of lubricants, as well as the efficient and accurate filling and labeling of lubricant containers. You will also be responsible for the proper handling and storage of materials, and for maintaining a clean and organized work environment. You will work closely with the production team to ensure that production targets are met and that the quality of the products is maintained.

Accountabilities

• Prepare and apply lubricants according to instructions and specifications
• Fill and label lubricant containers accurately and efficiently
• Maintain a clean and organized work environment
• Properly handle and store materials
• Work closely with the production team to ensure that production targets are met

The Candidate we're looking for

Experience:

• Ideal candidate has an A2 diploma or equivalent experience

Technical skills:

• Hands-on mentality
• Team player
• Good communication skills

Personal attributes:

• Flexible and willing to work in two shifts

Benefits

• Competitive salary and secondary benefits
• Opportunities for professional development and training
• Collaborative and supportive work environment
• Flexible working hours

XML job scraping automation by YubHub

What you'll do

Ensure daily operations through equipment readiness, proper root cause analysis and countermeasure activity, new model introduction, cycle time achievement, and Department KPI (Key Performance Indicator) achievement.

• Manage / maintain assigned equipment/robots. Achieve targeted downtime and run rate
• Actively participate in zone quality through quarterly inspections and monitoring of equipment applications
• Develop capability of self and team through training, mentoring, and sharing of experiences in area of technical expertise
• Support Business plan themes within assigned zone
• Communicate clearly through daily reporting to ensure shift-to-shift understanding of activity and pending items.

What you need

• Basic computer skills (Word, Excel, PowerPoint, Outlook)
• Basic knowledge of hand tools

XML job scraping automation by YubHub

What you'll do

Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.

• Repairing, maintaining equipment and supporting daily production.
• Responding to breakdowns and calls to keep production running.

What you need

• A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.
• Or a minimum of two years of relevant experience, if no degree.

XML job scraping automation by YubHub

What you'll do

Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.

• Repairing, maintaining equipment and supporting daily production.
• Responding to breakdowns and calls to keep production running.

What you need

• A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.
• Or a minimum of two years of relevant experience, if no degree.

XML job scraping automation by YubHub

What you'll do

The duties of a Production Associate include but are not limited to:

• Maintaining a safe and productive work environment
• Assembling or manufacturing units in a production environment
• Follow standard operating procedures and problem-solving safety, quality, cost and/or delivery items

What you need

• Understand verbal and written directions
• Ability to problem solve in a manufacturing environment

XML job scraping automation by YubHub

Bremer & Leguil are looking for a talented Produktionsmitarbeiter (m/w/d) at their Duisburg-Wanheimerort office. This role sits at the heart of production, ensuring the smooth operation of our manufacturing processes. You'll work directly with the production team to maintain high-quality standards and meet production targets.

About the Role

As a Produktionsmitarbeiter (m/w/d), you will be responsible for the production of various products, including the handling of chemicals, the operation of machinery, and the maintenance of a clean and safe working environment. You will also be responsible for performing quality control checks, identifying and reporting any issues or defects, and contributing to the development of new products and processes.

Accountabilities

• Conduct production tasks according to established procedures and guidelines
• Operate machinery and equipment safely and efficiently
• Perform quality control checks and report any issues or defects
• Maintain a clean and safe working environment
• Contribute to the development of new products and processes

The Candidate we're looking for

Experience:

• 1-2 years of experience in a production environment

Technical skills:

• Basic knowledge of machinery and equipment
• Familiarity with quality control procedures

Personal attributes:

• Strong attention to detail
• Ability to work independently and as part of a team
• Good communication and problem-solving skills

Benefits

• Competitive salary and benefits package
• Opportunities for professional development and growth
• Collaborative and dynamic work environment
• Flexible working hours and remote work options

XML job scraping automation by YubHub

What you'll do

• Always wear required personal protective equipment (PPE).
• Safely operate forklifts or pallet jacks to retrieve and move packaging materials.

What you need

• High School Diploma or equivalent required
• 2+ years of manufacturing experience

XML job scraping automation by YubHub

What you'll do

The Production Operator/Material Handler performs duties outlined in the Skills Matrix with a strong focus on safety, quality, and productivity. Key responsibilities include:

• Completing required paperwork, reports, and production documentation.
• Following the production schedule and established procedures.
• Communicating significant issues to supervisors.

What you need

• High School Diploma or equivalent required; technical experience (chemical, electrical, mechanical) preferred.
• 3+ years of manufacturing experience (chemical packaging preferred).
• 3+ years of forklift experience; certification preferred.

XML job scraping automation by YubHub

What you'll do

• Conduct laboratory testing of fluids in use following established testing procedures.
• Document data in our online system daily and generate basic performance reports.

What you need

• High school diploma or equivalent required.

XML job scraping automation by YubHub

What you'll do

As a Production Lead, you will be responsible for:

• Leading a team of production staff to ensure the efficient and effective manufacture of lubricants and specialty products.
• Implementing and maintaining quality control processes to ensure the highest standards of product quality.
• Collaborating with cross-functional teams to identify and implement process improvements.

What you need

To be successful in this role, you will need:

• A strong background in production management, preferably in the lubricants or chemical industry.
• Excellent leadership and communication skills.
• Ability to work in a fast-paced environment and prioritize tasks effectively.
• Strong analytical and problem-solving skills.

Why this matters

As a Production Lead, you will play a critical role in ensuring the quality and delivery of our products. Your leadership and expertise will have a direct impact on the success of our business and the satisfaction of our customers.

XML job scraping automation by YubHub

What you'll do

• Wear mandatory PPE at all times.
• Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures

What you need

• High school diploma or equivalent
• 2+ years working in chemical manufacturing experience
• Computer literate required

XML job scraping automation by YubHub

What you'll do

• Machine parts to Honda specifications to support line uptime, new model development, and manufacturing line maturation.

What you need

• Read and understand blueprints (head and block prints)
• Use appropriate measuring equipment
• Troubleshoot and countermeasure manufacturing related issues
• Provide technical support internal customer
• Effective time management
• Ability to manufacture parts using mill, lathe, surface grinder, and various other hand tools

XML job scraping automation by YubHub

What you'll do

Repair and maintain equipment and support daily production. Respond to breakdowns and calls to keep production running. Support weekend maintenance repair and preventative maintenance activities when necessary.

What you need

• Minimum of three months of relevant experience in a manufacturing environment with a 2-year technical degree or a minimum of two years of relevant experience if no degree

XML job scraping automation by YubHub

What you'll do

In this role, you will be responsible for consistently maintaining all department assets within their operating context to ensure daily Safety, Quality, Cost, Delivery, Morale, and Environment target achievement.

• Supporting the department in achieving daily production targets
• Performing daily equipment inspections/checks for abnormal situations

What you need

• High school Diploma or GED required
• Minimum of 2 years maintenance experience with a degree or technical certification OR 2-5 years of experience in an industrial environment

XML job scraping automation by YubHub

What you'll do

Direct lineside support of equipment running condition, problem response, trouble shooting, equipment confirmation, general equipment preventive maintenance, supporting shutdown activities, completing downtime summaries and line supporting activities.

• Safety - Monitor and enforce all department and plant safety rule
• Support the development of running adjustments, procedures and ensure safe proper training to staff and associates
• Performing assigned tasks on production equipment without detailed instructions – preventive maintenance
• Continually develop communication networks both within the department as well as other departments/factories to ensure product and department success.

What you need

• Basic Mechanical understanding (pneumatics, electrical, hydraulic, etc.)
• Ability to work with and teach others
• Must be able to actively follow-up on projects and equipment related issues.

XML job scraping automation by YubHub

XML job scraping automation by YubHub

What you'll do

• Accurately count parts as requested by the Parts Shortage Tracker, purchasing and prepared count lists.
• Accurately adjust Global Protection Control System and Global Consolidation Center System inventory systems with count results.
• Communicate count results to inventory control and purchasing.
• Research inventory discrepancies to determine root cause.
• Review and Disposition Cycle Count waves in Global Consolidation Center System.
• Effectively lead the pipeline/cycle count teams on the shift in daily tasks based off needs from Material Services management.
• Perform any other tasks or projects requested by Material Services management team.
• Support buildouts by carrying out counts, dispositioning obsolete inventory.

What you need

• Minimum 2 years Warehouse and/or inventory related experience and leadership experience.
• Knowledge of inventory management, supply chain, & transportation.
• Microsoft Office Proficient.
• GPCS (Global Production Control System).
• GCCS (Global Consolidation Center System).
• Good written and verbal communication.

XML job scraping automation by YubHub

What you'll do

The duties of a Production Associate include but are not limited to:

• Maintaining a safe and productive work environment
• Assembling or manufacturing units in a production environment
• Follow standard operating procedures and problem-solving safety, quality, cost and/or delivery items

What you need

• Must have at least 12 months of Manufacturing Experience in the past 5 years
• Understand verbal and written directions
• Ability to problem solve in a manufacturing environment
• Maintain 99% attendance
• Ensure quality throughout the production process
• Available to work overtime on weekdays/weekends as needed
• Ability to push-pull carts, perform repetitive lifting/actions, continuous bending

XML job scraping automation by YubHub

What you'll do

The duties of a Casting Associate include but are not limited to:

• Maintaining a safe and productive work environment
• Assembling or manufacturing units in a production environment
• Follow standard operating procedures and problem-solving safety, quality, cost and/or delivery items

What you need

• Must have at least 12 months of Manufacturing Experience in the past 5 years
• Casting Experience Preferred

XML job scraping automation by YubHub